Re: need comments on the attached hfss design
时间：04-06
整理：3721RD
点击：
Sorry..i cannot find the "edit configured libraries"...where is it? is my setting problem affect the gain?
---------- Post added at 22:22 ---------- Previous post was at 22:19 ----------
means the outside of the coax and coax pin is assign to perfect E?
---------- Post added at 22:23 ---------- Previous post was at 22:22 ----------
means outside the coax and coax pin assign by perfect E is enough?
---------- Post added at 22:42 ---------- Previous post was at 22:23 ----------
I need to verify my problem. I change the dimension, ground plane. The gain still did not improve.
---------- Post added at 22:22 ---------- Previous post was at 22:19 ----------
means the outside of the coax and coax pin is assign to perfect E?
---------- Post added at 22:23 ---------- Previous post was at 22:22 ----------
means outside the coax and coax pin assign by perfect E is enough?
---------- Post added at 22:42 ---------- Previous post was at 22:23 ----------
I need to verify my problem. I change the dimension, ground plane. The gain still did not improve.
attached comments design 相关文章：
- What does a strip attached to antenna use for?
- most urgent/////name of this antenna (attached figure)
- Theory behind the UltraWide Band character in the attached paper.
- regarding a circuit attached below
- I need your comments diversity antenna distribution system for UHF broadband
- Need Comments on Input Return loss for a Broadband PA