HFSS Surface Recovery Failure error
时间：04-05
整理：3721RD
点击：
Hi,
I have an array of nanowires which are basically cuboid. They have length=1um, width=1um and height=1um covering an area of 36x36um located 10nm apart.
They are on a substrate of height 10um and area 48x48um.
When I change the height of the nanowire from 1um to 4um I see the error: Surface Recovery failure Possible reasons : (1) . model has multiple objects with thin layers (2) complex model with object overlapping (3)" True surfaces are skewed.
With 1um height the simulation works without any errors.
Please help.
I have an array of nanowires which are basically cuboid. They have length=1um, width=1um and height=1um covering an area of 36x36um located 10nm apart.
They are on a substrate of height 10um and area 48x48um.
When I change the height of the nanowire from 1um to 4um I see the error: Surface Recovery failure Possible reasons : (1) . model has multiple objects with thin layers (2) complex model with object overlapping (3)" True surfaces are skewed.
With 1um height the simulation works without any errors.
Please help.