Impedance matching in FEKO 7
时间：04-04
整理：3721RD
点击：
Hello everyone!
In my current project of designing a fractal patch antenna based on the Sierpinski gasket I'm not able to achieve a S11 parameter. I've tried using pin feed and λ/4 transformer (using Smith chart) but they don't seem to work. In theory the antenna's impedance should be matched perfectly, but in POSTFEKO the results are not as expected. I want to ask if there is anything specific I need to know when configuring FEKO to solve the S-Parameter for my design.
My antenna:
Height of the big triangle: 61 mm.
εr of the dielectric: 4.8
Material height: 1.6 mm
In my current project of designing a fractal patch antenna based on the Sierpinski gasket I'm not able to achieve a S11 parameter. I've tried using pin feed and λ/4 transformer (using Smith chart) but they don't seem to work. In theory the antenna's impedance should be matched perfectly, but in POSTFEKO the results are not as expected. I want to ask if there is anything specific I need to know when configuring FEKO to solve the S-Parameter for my design.
My antenna:
Height of the big triangle: 61 mm.
εr of the dielectric: 4.8
Material height: 1.6 mm
- Output Impedance Of a Triple cascode
- How to make image impedance equal
- Input and output impedance matching in Distributed amplifier
- Characteristic impedance of combination of CPWG and stripline on inner layers
- Problem of impedance matching of Gilbert cell mixer
- Input impedance of transmission lines connected in cascade