HFSS Slot antenna design
时间:04-04
整理:3721RD
点击:
Hi. I'm simulating a 2.4Ghz slot antenna. Everything is well but when I do the Analyse all on HFSS v.13,
this error pops up.
HFSSDesign1 (DrivenTerminal)
[error] Port refinement, process hf3d error: Too few conductors were found on port p1. There should be one conductor for each terminal, with one additional reference conductor. Unintentional contact between conductors may cause this error.. (9:11:03 AM Mar 16, 2016)
[error] Simulation completed with execution error on server: Local Machine. (9:11:03 AM Mar 16, 2016)
How do I overcome this? Thanks. And how can I upload a file?
this error pops up.
HFSSDesign1 (DrivenTerminal)
[error] Port refinement, process hf3d error: Too few conductors were found on port p1. There should be one conductor for each terminal, with one additional reference conductor. Unintentional contact between conductors may cause this error.. (9:11:03 AM Mar 16, 2016)
[error] Simulation completed with execution error on server: Local Machine. (9:11:03 AM Mar 16, 2016)
How do I overcome this? Thanks. And how can I upload a file?
Hi kagawa,
The error is telling you that the port needs to be in contact with at least two conductors -- that's how driven terminal works. If you're just trying to excite a slotline mode, a Driven Modal may be better for you.
Good Luck
Hi PlanarMetamaterials,
My professor insists that the simulation be done in driven terminal and that's where I'm stuck. Please have a look at the attached files and let me know where the issue is.
Thanks in advance.
- Slotted Waveguide Antenna
- Slots cut in the center of the broad wall parallel to flow of currents in a waveguide
- Slot length and Width
- Obtaining slot antenna coupling/impedance from simulation.
- longitudinal shunt slot antenna array environment
- Problem with waveguide slot array antenna 23.6 GHz resonance vs 24.1 GHz simulation.