SoftPlot!

Hi all,

I am using SOftPlot tool,,,,,but having problem to collect 2-port S-parameters! I can collect S11, S12, S21,S22 at a time but not all together...does anyone knows how can i solve this problem ? Has anyone used it before....please need a help!

Hello MK28,


Softplot has AWR Microwave Office interface , use this to save all the individual S11, S12, S21, S22 data into S2P file it directly embeds or saves into MWO Data Files section... See the below link for more details
You can simply select as a subcircuit block for use in Circuit Schematic or Visual System Simulator System Digram ...

http://www.aphena.com/mwoffice/index.htm


---manju---

If the instrument is set up to make 2-port measurements, then this is easy. SoftPlot uses Channel 1 to sequence through the 4 s-parameters and it imports them in sequence. Set the SoftPlot destination store to S11. For some analyzers, eg Anritsu 360, the sweep-and-hold for each measurement was only implemented in V6.00.92 (November 2006 release).
You need to upgrade the software if you are not using the latest version....


---manju---