Pleas help if you can,,, equivalent diode
时间:04-01
整理:3721RD
点击:
Dear all Electronics Engineers,
Kindly I have a question which is very important for me, so pleas, pleas advice and help me...
I have to repair a transceivers work in 5.8GHz and 5.4 GHz rang,
I found the faulty component, it?s a surface mount diode
(it has a cathode label as I draw it in the picture but it?s not that clear, and I take a same component from working one and its reading like a diode)
but I can?t find a spare part in
My country and I can?t guess the equivalent or nearest equivalent for it ,
Also I didn?t find the data sheet for it,
The diode labeled by the following:
DH538
ME
Or
DH428
ME
Or
ME
3A
In attached transceiver the position of diode clarified,
This is a part of point to point connection equipment, the right input to be connected by IF cable with the base
Unit of this equipments and when this diode become faulty (short circuit) the base unit doesn?t work completely
even power and its fans its likely nothing tuned on, when I remove this diode the device work properly but its
gives an additional 3db cable attenuation to be 4db as a total cable attenuation (in its system status web page),
but its really work properly, the problem when you expand IF cable to be longer the cable attenuation will increase
this cause unstable performance,
Regarding the left output it?s for antennas,
However i hope to find an expert to help me ...
Kindly I have a question which is very important for me, so pleas, pleas advice and help me...
I have to repair a transceivers work in 5.8GHz and 5.4 GHz rang,
I found the faulty component, it?s a surface mount diode
(it has a cathode label as I draw it in the picture but it?s not that clear, and I take a same component from working one and its reading like a diode)
but I can?t find a spare part in
My country and I can?t guess the equivalent or nearest equivalent for it ,
Also I didn?t find the data sheet for it,
The diode labeled by the following:
DH538
ME
Or
DH428
ME
Or
ME
3A
In attached transceiver the position of diode clarified,
This is a part of point to point connection equipment, the right input to be connected by IF cable with the base
Unit of this equipments and when this diode become faulty (short circuit) the base unit doesn?t work completely
even power and its fans its likely nothing tuned on, when I remove this diode the device work properly but its
gives an additional 3db cable attenuation to be 4db as a total cable attenuation (in its system status web page),
but its really work properly, the problem when you expand IF cable to be longer the cable attenuation will increase
this cause unstable performance,
Regarding the left output it?s for antennas,
However i hope to find an expert to help me ...
Pleas equivalent diode 相关文章:
- pleaseee help me about fdtd
- ADS 2006 - MCROSO Equivalent Lumped-Element Circuit
- Can exported HFSS equivalent circuit file to be used in ADS?
- What is the command line equivalent of 'Export current Plot' in COMSOL?
- loking for Equivalent Circuit Model of Microwave-HJFETs
- Lumped element equivalent circuit