CPWG loss per unit length
时间：03-31
整理：3721RD
点击：
If I have a CPWG of length 1mm which gives IL of say X dB, then what would be the IL for 2mm of same CPWG. Should it not be 2X dB.
I did simulation in HFSS(Driven terminal) for 2mm and 5mm of CPWG and following are the results:
Length Zo IL IL/cm RL
2mm 49.909 -0.4436 -2.218 -25.9589
5 mm 49.314 -1.559 -3.118 -23.4257
I was expecting IL/cm to be close to each other but there is significant difference. Is my assumption wrong or I am doing something wrong in HFSS.
I did simulation in HFSS(Driven terminal) for 2mm and 5mm of CPWG and following are the results:
Length Zo IL IL/cm RL
2mm 49.909 -0.4436 -2.218 -25.9589
5 mm 49.314 -1.559 -3.118 -23.4257
I was expecting IL/cm to be close to each other but there is significant difference. Is my assumption wrong or I am doing something wrong in HFSS.
- Return loss and phase graph how to interpret
- Is core loss in an inductor proportional to it's inductance value?
- Computing metallic losses for coplanar waveguide | HFSS
- how can I calculate the returnloss theoritically depending on the simulation results
- Core loss, proximity and skin loss
- How big is core losses in an inductor at 40kHz?