cst axial ratio
时间：03-31
整理：3721RD
点击：
Good morning,
i have some problem with CST microwave studio 2008. I have designed a square patch with trim corner for circular polarization (E-PLANE is ZY and H-PLANE is ZX). The CST axial ratio is defined over theta and phi component of e-field. I desire obtainer a axial ratio define as ratio of efield over X and efield over Y. What passes are necessary for the conversion of above mentioned axial ratio?
thank you for courtesy,
Giacomo:D
i have some problem with CST microwave studio 2008. I have designed a square patch with trim corner for circular polarization (E-PLANE is ZY and H-PLANE is ZX). The CST axial ratio is defined over theta and phi component of e-field. I desire obtainer a axial ratio define as ratio of efield over X and efield over Y. What passes are necessary for the conversion of above mentioned axial ratio?
thank you for courtesy,
Giacomo:D
- CST Postprocessing of multiple S-parameters (single frequency parameter extraction)
- Shielding Simulation in CST
- Illegal usage of S-Matrix, No impedance found error in cst
- Line impedance in CST
- CST dual polarized H-slot antenna is very well matched but has poor total efficiency
- CST Matlab Interface, Export Far Field Result Automatically