Help me solve a problem in using FDTD method
时间：03-31
整理：3721RD
点击：
hi for all
please any persone help me:
i have problem, when i read the paper R. J. Luebbers, Fellow, IEEE, and H. S. Langdon ?A Simple Feed Model that Reduces Time Steps Needed for FDTD Antenna and Microstrip Calculations[/color]? IEEE TRAKSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 44, NO. I, JULY 1996. and programed by matlab ,i have the same result when resistive source Rs=50 ohm , but when the resistive source Rs=0 ohm i cannot get the same results in the paper ,
i connot understand where my mistake ,
please help me
thank for all
please any persone help me:
i have problem, when i read the paper R. J. Luebbers, Fellow, IEEE, and H. S. Langdon ?A Simple Feed Model that Reduces Time Steps Needed for FDTD Antenna and Microstrip Calculations[/color]? IEEE TRAKSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 44, NO. I, JULY 1996. and programed by matlab ,i have the same result when resistive source Rs=50 ohm , but when the resistive source Rs=0 ohm i cannot get the same results in the paper ,
i connot understand where my mistake ,
please help me
thank for all
- HOW i solve Input S-Parameter to HEMT device output the circuit parmeters of the HEMT
- How to run FD solver with unit cell boundary condition using matlab code
- please explain how to solve error in hfss
- Reflectance from IE solver in HFSS
- CST Time Domain Solver - Adaptive port meshing failed
- HFSS Solve nside_finite conductivity