microstrip transmision line dimensions
时间：03-26
整理：3721RD
点击：
ok, i seen a lot of threads about this subject but none gives a straight answer,
im simulating a microstrip patch antenna edge feed ( microstrip transmision line right in the middle)
er= 2.2
Thikness of the dielectric = 1.57mm
Lenght: quarter wave transfomer
Frecuency= 2.4 Ghz
Width=?
well if know that my Zin= 50 ohm and Z out = its about 343 Omh i know that my Z0 its thw square root of blablabla
i want to know how to calculate the micrstrip line Lengh and width, is there af ormula for this ( i dont wanna use the miscrostrip line calculators i want to know how the calculate ) i mean i would guess that the lenght of the quarter wave would be (C/f)/4 C being the speed of light, but when i use the calculators it gives something different whyyyyyyyyyyyyy, i have read thousends of mictrosttrip handbooks balanis, but none of them give a clear insight on how to calculate the width lenght of a quarter wave transformer transmision line ( eadge feed in the middle of the microstrip patch) plz help me.
im simulating a microstrip patch antenna edge feed ( microstrip transmision line right in the middle)
er= 2.2
Thikness of the dielectric = 1.57mm
Lenght: quarter wave transfomer
Frecuency= 2.4 Ghz
Width=?
well if know that my Zin= 50 ohm and Z out = its about 343 Omh i know that my Z0 its thw square root of blablabla
i want to know how to calculate the micrstrip line Lengh and width, is there af ormula for this ( i dont wanna use the miscrostrip line calculators i want to know how the calculate ) i mean i would guess that the lenght of the quarter wave would be (C/f)/4 C being the speed of light, but when i use the calculators it gives something different whyyyyyyyyyyyyy, i have read thousends of mictrosttrip handbooks balanis, but none of them give a clear insight on how to calculate the width lenght of a quarter wave transformer transmision line ( eadge feed in the middle of the microstrip patch) plz help me.
Hello,
Here are the formulae for W & L of Microstrip fed patch antenna design...
W=(C *sqrt[(er +1)/2] )/2*f0 where W is the Width of of the radiating edge C=3*10e8 f0 is resonance frequency
& L=C/(2*f0*sqrt(er)) & find out the effective L
you can see these eqations & more details in the following DESIGN OF MICROSTRIP PATCH ARRAY ANTENNA document...
http://dspace.unimap.edu.my/dspace/b...ethodology.pdf
---manju---
thanx alot, i wanted to leave this link to anyone wanting to design an accurate transmision line, read this pdf and i guarantee you will be doubt free
http://www.csus.edu/indiv/o/oldenbur...ipDesCompl.pdf