ADS Momentum : Simple differential (sport problem)<-NO !
时间：03-26
整理：3721RD
点击：
Dear all,
I have a simple layout, with 2 conductors and 4 ports.
These 4 ports are differentials, the substrate definition is a FreeSpace layer, a Dielectric layer (let"s say Alumine), and another FreeSpace_0 layer with open boundary. So, no ground plane.
The substrate calculation worked fine, so the meshing.
Then after, the simulation too.
But when I want to up Create/Update the equivalent component, Momentum returns this error:
I thought it was a port problem, but I cannot explain the error.
And as I quit this project and restart , I have an "AEL error" message.
Do you have an idea where is the problem?
I previously tried deleting ATF file, with no more success.
Any help would be appreciated.
Thanks a lot !
Regards
I have a simple layout, with 2 conductors and 4 ports.
These 4 ports are differentials, the substrate definition is a FreeSpace layer, a Dielectric layer (let"s say Alumine), and another FreeSpace_0 layer with open boundary. So, no ground plane.
The substrate calculation worked fine, so the meshing.
Then after, the simulation too.
But when I want to up Create/Update the equivalent component, Momentum returns this error:
I thought it was a port problem, but I cannot explain the error.
And as I quit this project and restart , I have an "AEL error" message.
Do you have an idea where is the problem?
I previously tried deleting ATF file, with no more success.
Any help would be appreciated.
Thanks a lot !
Regards
Devil's in the Details...
NEVER use the "-" (minus) character in a file name.
Never EVER !
Hope this helps