Re: hi jian plz help me with this file using ie3d
时间：03-26
整理：3721RD
点击：
Hi, Ramani:
By isolate them, I mean "insulate" them. There is no way to isolate them electrically because there will be field between. However, you use a substrate of 10 ohm.cm and it is semi-conductor (SI). You need to have a low loss dielectrics with little loss between the SI and your metallic strip. It should reduce most of the loss immediately. Best regards.
By isolate them, I mean "insulate" them. There is no way to isolate them electrically because there will be field between. However, you use a substrate of 10 ohm.cm and it is semi-conductor (SI). You need to have a low loss dielectrics with little loss between the SI and your metallic strip. It should reduce most of the loss immediately. Best regards.
plz i m designing square sa using coaxial feed.,
here are my patch dimensions...
L= 23.6mm
w=23.6mm
h=1.6mm
die const= 4.4(FR4)
so plz reply..