How to make this UWB patch antenna better
Kindly see the attached picture. I have made a patch antenna.
What I need I want to know how to make it better so that its radiation pattern will become uniform through out the bandwidth almost circular pattern. I want to also make its S11 Better so that its loss is minimum. How to make its gain more better. how to enhance bandwidth.
bandwidth : 2-10 GHz ( If more would be better)
Fractal Antenna.....
no size limitation till yet...
All people kind help is needed.
What i need is the only guidance from the experts. So that I can make this antenna better for my research work
Hello Every one. I have put Some more information. I have attached the Gain plot and S11 parameters. What i want to do is to make S11 more down. Along with I have attached the Radiation pattern (0,90) phi at 1-10 Ghz . At some freq it is not a circular shape. I want it to be identical having more good gain . Kindly suggest some means in order to lower down first the S11 and then Increase Gain . with almost similar radiation pattern at all frequencies.
1. try to increase the perimeter of the patch antenna because it is inversly proportional frequency
2. check the dimensions of the radiation box
3. check the waveport dimensions
4. check the convergence
5.try to plot the currenty deinsity graph at low frewuencies and observe that any cancellation occurs
hello sir
Can you please tell me following
1. Perimet,er means to increase the whole size of the patch antenna or just copper track area.
2. radiation box i have done about lamda/4
3. waveport i have given on the teflon and min is excited from it
4. can you please tell me about this convergence point more
5. I will plot the current density ....but what i have to do with this..... i have less theoretical knowledge kindly guide