Getting error while running HFSS 10
"Lamda refining, process mesh3d: Insufficient memory "
please help me to solve this problem
The simulation model is not really big and the memory of my computer is 2 GB.
Perhaps you have set boundary too large?
Attach your .hfss file...
I have attched the hfss file.
the same model was working fine before but when i changed the port impedance of the lump port i am getting this error message.
Added after 5 minutes:
the Parametric sweep is working fine but normal simulation is not working
how did u change the impedance ? 75ohm?
the structure in the hfss file is a cross junction that splits the input power into 3 parts.
for example if the input power is 4 then the power obtained at the 2 lumports is 1 and at waveguide port 2 is 2.
at the ends of the curved section i will connecting a patch antenna working at 76 GHz. so to determine the impedance of the patch antenna i used a ordinary wave port and i specified the corresponding patch impedance for the lumport