board dx5400

It better to use Quad-Core Intel Xeon Processor 5400 Series
E5405....E5472, X5450......X5482
and now you can use the new Intel Core 2 Extreme Processor QX9775
Architecture 45 nanometer technology
L2 Cache 12 MB
L3 Cache N/A
Clock Speed 3.20 GHz
Front Side Bus Speed 1600 MHz
Package FC-LGA8
Chipset Intel E5400 Chipset
Boards DX5400
Slot/Socket Type LGA771-compatible only with the Intel Desktop Board DX5400 supporting a dual-socket configuration
Pin Count 771

thanks plasma

does it support ddr3

For series 5400 the max memory clock for the moment is 800MHz it depends on the Intel 5400 Chipset look at: http://www.intel.com/products/chipsets/5400/index.htm

Hp new workstation works with 667MHz
http://h10010.www1.hp.com/wwpc/us/en...1-3432827.html

or you can use desktop based on this ASUS motherboard up to ddr3 1333 and over clocking 1800
http://www.asus.com/products.aspx?l1...35&modelmenu=1
but you have to wait until Intel will come up with 45nm dual or quad for desktop.
there is another one
http://www.asus.com/products.aspx?l1...69&modelmenu=2
can use DDR3 1600 and over clocking 2000MHz

all of this depend on the chipset the first X38 and for the second X48

RGZ

Hy plasma

thanks for the information you helped a lot.
Maybe you know the relation between memory to mesh cells at CST ?
how much memory neended for amount of meshcells?

thanks

kocha

look at AW answer in

https://www.edaboard.com/ftopic288257.html

pl.