Plotting parametric sweep results in HFSS 9.2

Hello,

How can I plot the results (with respect of frequency) of parametric sweep in same plot. I have tried to select design via HFSS->Results->Solution Data and HFSS->Results->Browse Solution but I think I just manage to plot the nominal design.

Thanks,
Markus

I'm sure you can do this:
Right click Results > Create report > Select S-par then OK > on SOLUTION (left-hand side), select Setup1 SWEEP,
Then select the frequency you want > ADD TRACE (bottom of window), then keep adding several traces.
NOTE: this works with S-Par ONLY. If you select Field or Near-field, you'll ONLY see 1 frequency at a time.

Cheers

hi another way is you can use a third party tool such as matlab to do it .
but you firstly need to export your results from HFSS ,for example Sdb1 ,Sdb2 vs. frequency into a .txt file(or .dat etc), then use matlab to plot it .
origin is another tool
maybe this can help
kaka

a) Please give link to that "origin" program.

b) To export plot, always use tab-separated:

1) Select export,
2) then select: Tab-separated
3) Save file then open it with excel.
4) Excel automatically put all the columns nicely because the fields are tab-separated.
5) repeat with several plots to combine them together.

xxx.

it is very good information thank you guys and thank you costox