HFSS - Please Help Me
ver 9.1 and can not get the answer. The answer should be about 107pF.
Each plate is 1.0 inch x 1.0 inch and 1.0 mil (0.001inches) thick. The
plates are seperated by 10 mils. The dielectric layer between the plates has a dielectric constant of 4.4.
I am not sure how to set up the model,boundaries or the excitations (wave ports or lumped ports). Attached is my file <2parallel_plates.hfss>. Please tell what I am doing wrong and please attach your file.
I thank you very much. "camelot2" - Dave Collins
You can try to execute manual meshing inside the dielectric layer.
Try to increase number of passes, this number shoulld be about 10-20 for good results.
You forgot to upload your file in last post :)
Hi,
I don't know which style field you want to simulate,static or time harmonic field?
If it's time harmonic field,the parallel palte capacitance is equated to the coaxial transmittal line,you can draw a coaxial model set two ports and simulate it.
Regards!
caocao
You can see the manual meshing inside the dielectric layer
Increase number of adaptive passes is a good idea.And you can reduce Max Delta S.
hi, I am a newer too, If nobody can helped, you should run your own model repeatedly with step-by-step changing of the conditions. it does work to me.
good luck!