non-50 Ohm reference antenna in HFSS9

Hi all:
I met a serious problem.
If the load to connect to antenna is not 50 ohm, say, 35ohm-j200ohm.
And I need to use the dipole type antenna to match and radiate the desired frequency 800MHz.
The output of load is directly connected to dipole twin input pads.
So there is no chance to use transmission line to match a well-designed 50ohm antenna to the load.
I have to design antenna to directly match into the load, by HFSS9.

Can someone help?

The other question I have is as following:
How could I see in HFSS9 the radiation pattern of the whole system that antenna is connected the load?

Thanks for any recommendation.