CC1310 程序下载完不运行

CC1310 程序下载完不运行，如附件所示那个三角不绿

请问能详细说明下吗？您用SmartRF Flash Programmer试试能不能下载成功

Cortex_M3_0: JTAG Communication Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 7.0.100.1)
Cortex_M3_0: Failed to remove the debug state from the target before disconnecting.  There may still be breakpoint op-codes embedded in program memory.  It is recommended that you reset the emulator before you connect and reload your program before you continue debugging

那是提示红色错

附件也是提示的错误

感觉是旧的程序擦除不了，新写进去的程序在flash里不是从首地址开始的

看起来像是仿真器的问题，你试试重新插拔一下。

另外，你使用的是TI LaunchPad还是自己的板子？

可以参考下面两个E2E帖子中的处理方法

http://e2e.ti.com/support/microcontrollers/tiva_arm/f/908/t/609778?tisearch=e2e-sitesearch&keymatch=JTAG%20Communication%20Error%3A%20(Error%20-1170%20%40%200x0)%20Unable%20to%20access%20the%20DAP

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/585287?tisearch=e2e-sitesearch&keymatch=JTAG%20Communication%20Error%3A%20(Error%20-1170%20%40%200x0)%20Unable%20to%20access%20the%20DAP

我是用评估板smartRF06上的jtag下载到我自己画的CC1310核心板

建议你检查一下连线是否正确。

在下面链接可以找到smartRF06eb的原理图

http://www.ti.com/lit/df/swrr143/swrr143.pdf