CC1310烧不进程序

以前的工作都是在SmartRFID06开发板上做的，今天用那个板子上的JTAG下载进程序去，怎么回事儿？谢谢

请提供更详细的信息：

1、用的CC1310哪个开发板？

2、具体怎么不能下载？无反应还是显示失败？

你好

提示：Cortex_M3_0: Can't Run Target CPU: (Error -2134 @ 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 6.0.576.0)
Cortex_M3_0: JTAG Communication Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 6.0.576.0)

SmartRFID06开发板