出NC ROUTE 警告，什么意思？
(------------------------------------------------------------)
( )
( NC ROUTE LOG FILE )
( )
( Drawing : RVEP3C5_5mil.brd )
( Date/Time : Wed Oct 15 13:27:47 2008 )
( )
(------------------------------------------------------------)
rocessing NC Parameters file ...
NC PARAMETERS
-------------
FORMAT 3.5
MACHINE-OFFSET x:0.000000 y:0.000000
FEEDRATE 1
COORDINATES ABSOLUTE
OUTPUT-UNITS ENGLISH
TOOL-ORDER INCREASING
REPEAT-CODES YES
SUPPRESS-LEAD-ZEROES NO
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL NO
TOOL-SELECT NO
HEADER none
LEADER 12
CODE ASCII
SEPARATE NO
OPTIMIZE_DRILLING NO
ENHANCED_EXCELLON NO
SCALE 1.000000
-------------------------------------------------------------
rocessing route path data ...
WARNING: No route path data was found for processing.
-------------------------------------------------------------
rocessing slot hole data ...
WARNING: Can't find NC Route bit file (ncroutebits.txt)！
Using T01 to route ALL route cuts.
WARNING: No toolcode of a size the same as or smaller than 31 found for an OVAL slot！
Defaulting to T01 as toolname.
WARNING: No toolcode of a size the same as or smaller than 31 found for an OVAL slot！
Defaulting to T01 as toolname.
WARNING: No toolcode of a size the same as or smaller than 31 found for an OVAL slot！
Defaulting to T01 as toolname.
OVAL slots routed: 3
RECTANGLE slots routed: 0
-------------------------------------------------------------
NC Route file RVEP3C5_5mil.rou created WITH WARNINGS ... Program completed.
请教，什么意思，加急啊。
rocessing route path data ...
WARNING: No route path data was found for processing.
-------------------------------------------------------------
rocessing slot hole data ...
rocessing tool file (ncroutebits.txt) ...
NOTE: All units are assumed to be inches.
0.025 T01
0.030 T02
0.050 T03
0.075 T04
No errors found.
OVAL slots routed: 3
RECTANGLE slots routed: 0
-------------------------------------------------------------
NC Route file RVEP3C5_5mil.rou created ... Program completed.
ncroutebits.txt，文件通过了。
还有个NC_ROUTE path,怎么画?
我们供应新起点-成人牙齿矫正价格www.800258.com
广西南宁市新起点牙齿矫正网-新时代新技术，隐型牙齿矫正器，让你在别人不知不觉的情况下，轻松的矫正牙齿，解决长期钢牙矫正的不美观效果。隐形矫正器官网： http://www.800258.com 咨询QQ：974936279,
ncroutebits.txt文件是自己手动创建的，放在和brd同一个目录就OK。
ncroutebits.txt文件的内容：
0.032 T01
0.060 T02
0.120 T03
ncroutebits.txt文件是铣刀的直径文件，需要什么刀具，就写上刀具的直径。国内一般铣刀的直径是0.8mm-3.175mm。没有这个文件，就会有告警，在cam350中导入route文件的时候，软件会自动分配一个铣刀直径。而NC_ROUTE path是指你在板子上画的一条铣刀路径，比如板卡外框就是铣刀铣出来的。或者说板卡中间有挖空，需要自己画一条NC_ROUTE path。画在board geometry的ncroute_path层上。如果没有ncroute_path的sub class话，在allgero的命令窗口输入：define subclass
找到board geometry，然后输入ncroute_path，回车就好。