PADS导入（初级）问题

第一次用PADS，别人给的PCB，但是没有原理图，只有原理图PDF，所以我照着PDF画的原理图，在导入后出现如下问题，待解决：

Reading file --  D:\pro\BMP0101-01\SMARTCARD\01-14\zzz.asc
*Unspecified or unsupported version of ASCII file
*PADS-PCB*
Part name already used C1
C1               CE-0.2

Can't find part Type item < SO28W >
IC1              SO28W
Can't find part Type item < L10 >
L1               L10
Can't find part Type item < L10 >
L2               L10
Can't find part Type item < SOT-23 >
Q1               SOT-23

*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal N2854659
Mixing nets 3V3 C1 1 NETR5_1 R5 1
IC1.21 R1.1 R8.2 R3.1 C3.1 L1.2 C1.1 R5.1
Mixing nets N2854835 R2 2 NETR2_2 R2 2
R2.2 IC1.2
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal N2854835
Mixing nets N2855061 R3 2 NETR3_2 R3 2
R3.2 IC1.3

*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal X00027
Mixing nets N2886049 Q1 1 NETR10_2 Q1 1

我看了最后一个ERROR，原理图上的名字是 N2886049，而PCB上的名字是NETR10_2

不知问题出在哪，PCB库也已经保存在默认目录下了，望指教。

元器件原理图和PCB库的名字对不上

对应不上就只能改原理图的名称是吗?没有更好的方法?