s3c2440 nand flash 的操作

@******************************************************************************

@ File：head.s
@ 功能：设置SDRAM，将程序复制到SDRAM，然后跳到SDRAM继续执行
@******************************************************************************

.text
.global _start
_start:
@函数disable_watch_dog, memsetup, init_nand, nand_read_ll在init.c中定义
ldr sp, =4096 @设置堆栈
bl disable_watch_dog @关WATCH DOG
bl memsetup @初始化SDRAM
bl nand_init @初始化NAND Flash

@将NAND Flash中地址4096开始的1024字节代码(main.c编译得到)复制到SDRAM中
@nand_read_ll函数需要3个参数：
ldr r0, =0x30000000 @1. 目标地址=0x30000000，这是SDRAM的起始地址
mov r1, #4096 @2. 源地址 = 4096，连接的时候，main.c中的代码都存在NAND Flash地址4096开始处
mov r2, #1024 @3. 复制长度= 1024(bytes)，对于本实验的main.c，这是足够了
bl nand_read @调用C函数nand_read

ldr sp, =0x34000000 @设置栈
ldr lr, =halt_loop @设置返回地址
ldr pc, =main @b指令和bl指令只能前后跳转32M的范围，所以这里使用向pc赋值的方法进行跳转
halt_loop:
b halt_loop

#define WTCON(*(volatile unsigned long *)0x53000000)

#define MEM_CTL_BASE0x48000000

void disable_watch_dog();
void memsetup();

void disable_watch_dog()
{
WTCON= 0;
}

void memsetup()
{
int i = 0;
unsigned long *p = (unsigned long *)MEM_CTL_BASE;

unsigned long const mem_cfg_val[]={ 0x22011110, //BWSCON
0x00000700, //BANKCON0
0x00000700, //BANKCON1
0x00000700, //BANKCON2
0x00000700, //BANKCON3
0x00000700, //BANKCON4
0x00000700, //BANKCON5
0x00018005, //BANKCON6
0x00018005, //BANKCON7
0x008C07A3, //REFRESH
0x000000B1, //BANKSIZE
0x00000030, //MRSRB6
0x00000030, //MRSRB7
};

for(; i < 13; i++)
p[i] = mem_cfg_val[i];
}

ｎａｎｄ．ｃ

#define GSTATUS1 (*(volatile unsigned int *)0x560000B0)
#define BUSY 1

typedef unsigned int S3C24X0_REG32;

typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFECC;
} S3C2410_NAND;

typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCONT;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFMECCD0;
S3C24X0_REG32 NFMECCD1;
S3C24X0_REG32 NFSECCD;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFESTAT0;
S3C24X0_REG32 NFESTAT1;
S3C24X0_REG32 NFMECC0;
S3C24X0_REG32 NFMECC1;
S3C24X0_REG32 NFSECC;
S3C24X0_REG32 NFSBLK;
S3C24X0_REG32 NFEBLK;
} S3C2440_NAND;

typedef struct {
void (*nand_reset)(void);
void (*wait_idle)(void);
void (*nand_select_chip)(void);
void (*nand_deselect_chip)(void);
void (*write_cmd)(int cmd);
void (*write_addr)(unsigned int addr);
unsigned char (*read_data)(void);
}t_nand_chip;

static S3C2410_NAND * s3c2410nand = (S3C2410_NAND *)0x4e000000;
static S3C2440_NAND * s3c2440nand = (S3C2440_NAND *)0x4e000000;

static t_nand_chip nand_chip;

void nand_init(void);
void nand_read(unsigned char *buf, unsigned long start_addr, int size);

static void nand_reset(void);
static void wait_idle(void);
static void nand_select_chip(void);
static void nand_deselect_chip(void);
static void write_cmd(int cmd);
static void write_addr(unsigned int addr);
static unsigned char read_data(void);

static void s3c2410_nand_reset(void);
static void s3c2410_wait_idle(void);
static void s3c2410_nand_select_chip(void);
static void s3c2410_nand_deselect_chip(void);
static void s3c2410_write_cmd(int cmd);
static void s3c2410_write_addr(unsigned int addr);
static unsigned char s3c2410_read_data();

static void s3c2440_nand_reset(void);
static void s3c2440_wait_idle(void);
static void s3c2440_nand_select_chip(void);
static void s3c2440_nand_deselect_chip(void);
static void s3c2440_write_cmd(int cmd);
static void s3c2440_write_addr(unsigned int addr);
static unsigned char s3c2440_read_data(void);

static void s3c2410_n