EEPROM 存储电台PLL子程序

#include "STC12C5620AD.H"#include "EEPROM.H"#include "Channel_Handle.H"/********************** 声明外部变量**************************//********************** EEPROM 存储电台PLL*************************/void EEPROM_Save_PLL(uchar Index,uint Udata){uchar	Temp_H;uchar	Temp_L;				//PLL转换缓存uchar	EEPROM_H;uchar	EEPROM_L;			//EEPROM读取缓存Temp_H=Udata>>8;Temp_L=Udata%256;switch (Index){case 1:EEPROM_H=EEPROM_Read_Byte(0x00,0x02);	  	//暂存N0.8电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x00,0x03);	  	//暂存N0.8电台PLL高位EEPROM_Earse(0x00,0x00);  					//擦除第1扇区EEPROM_Write_Byte(Temp_H,0x00,0x00);		//写入N0.1电台PLL高位EEPROM_Write_Byte(Temp_L,0x00,0x01);		//写入N0.1电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x00,0x02);		//写入N0.8电台PLL高位EEPROM_Write_Byte(EEPROM_L,0x00,0x03);		//写入N0.8电台PLL低位EEPROM_Earse(0x0e,0x00);  					//擦除第8扇区EEPROM_Write_Byte(Index,0x0e,0x00);			//写入电台序号										break;case 2:EEPROM_H=EEPROM_Read_Byte(0x02,0x02);	  	//暂存N0.9电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x02,0x03);	  	//暂存N0.9电台PLL高位EEPROM_Earse(0x02,0x00);  					//擦除第2扇区EEPROM_Write_Byte(Temp_H,0x02,0x00);		//写入N0.2电台PLL高位EEPROM_Write_Byte(Temp_L,0x02,0x01);		//写入N0.2电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x02,0x02);		//写入N0.9电台PLL高位EEPROM_Write_Byte(EEPROM_L,0x02,0x03);		//写入N0.9电台PLL低位EEPROM_Earse(0x0e,0x00);  					//擦除第8扇区EEPROM_Write_Byte(Index,0x0e,0x00);			//写入电台序号										break;case 3:EEPROM_H=EEPROM_Read_Byte(0x04,0x02);	  	//暂存N0.10电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x04,0x03);	  	//暂存N0.10电台PLL高位EEPROM_Earse(0x04,0x00);  					//擦除第3扇区EEPROM_Write_Byte(Temp_H,0x04,0x00);		//写入N0.3电台PLL高位EEPROM_Write_Byte(Temp_L,0x04,0x01);		//写入N0.3电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x04,0x02);		//写入N0.10电台PLL高位EEPROM_Write_Byte(EEPROM_L,0x04,0x03);		//写入N0.10电台PLL低位EEPROM_Earse(0x0e,0x00);  					//擦除第8扇区EEPROM_Write_Byte(Index,0x0e,0x00);			//写入电台序号										break;case 4:EEPROM_H=EEPROM_Read_Byte(0x06,0x02);	  	//暂存N0.11电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x06,0x03);	  	//暂存N0.11电台PLL高位EEPROM_Earse(0x06,0x00);  					//擦除第4扇区EEPROM_Write_Byte(Temp_H,0x06,0x00);		//写入N0.4电台PLL高位EEPROM_Write_Byte(Temp_L,0x06,0x01);		//写入N0.4电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x06,0x02);		//写入N0.11电台PLL高位EEPROM_Write_Byte(EEPROM_L,0x06,0x03);		//写入N0.11电台PLL低位EEPROM_Earse(0x0e,0x00);  					//擦除第8扇区EEPROM_Write_Byte(Index,0x0e,0x00);			//写入电台序号										break;case 5:EEPROM_H=EEPROM_Read_Byte(0x08,0x02);	  	//暂存N0.12电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x08,0x03);	  	//暂存N0.12电台PLL高位EEPROM_Earse(0x08,0x00);  					//擦除第5扇区EEPROM_Write_Byte(Temp_H,0x08,0x00);		//写入N0.5电台PLL高位EEPROM_Write_Byte(Temp_L,0x08,0x01);		//写入N0.5电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x08,0x02);		//写入N0.12电台PLL高位EEPROM_Write_Byte(EEPROM_L,0x08,0x03);		//写入N0.12电台PLL低位EEPROM_Earse(0x0e,0x00);  					//擦除第8扇区EEPROM_Write_Byte(Index,0x0e,0x00);			//写入电台序号										break;case 6:EEPROM_H=EEPROM_Read_Byte(0x0a,0x02);	  	//暂存N0.13电台PLL高位EEPROM_L=EEPROM_Read_Byte(0x0a,0x03);	  	//暂存N0.13电台PLL高位EEPROM_Earse(0x0a,0x00);  					//擦除第6扇区EEPROM_Write_Byte(Temp_H,0x0a,0x00);		//写入N0.6电台PLL高位EEPROM_Write_Byte(Temp_L,0x0a,0x01);		//写入N0.6电台PLL低位EEPROM_Write_Byte(EEPROM_H,0x0a,0x02);		//写入N0.13电台PLL高位EEPROM_Write_Byte(EEPR