基于ICL8001G设计的准谐振模式LED驱动技术
ICL8001G是准谐振模式LED驱动器,精密的PWM可用于相位调光,功率因素大于98%,效率高达90%,工作电压高达26V。本文介绍了ICL8001G主要特性和亮点,方框图以及初级控制应用电路图和EVAL-LED-ICL8001G-Bulb02演示板主要特性,电路图,材料清单和变压电路图。
ICL8001G 产品亮点:
• Quasi-Resonant Control For Highly Efficient LED Driving Solutions
• Primary Side Flyback Control With Integrated PFC And Phase-Cut Dimming
• Integrated HV Startup Cell For Short Time To Light
• Best In Class System BOM For Dimmable LED Bulb
ICL8001G主要特性:
• High, stable efficiency over wide operating range
• Optimized for trailing- and leading-edge dimmer
• Precise PWM for primary PFC and dimming control
• Power cell for Vcc pre-charging with constant current
• Built-in digital soft-start
• Foldback correction and cycle-by-cycle peak current limitation
• VCC over/ under-voltage lockout
• Auto restart mode for short circuit protection
• Adjustable latch-off mode for output overvoltage protection
图1。ICL8001G方框图
图2。ICL8001G初级控制应用电路图
EVAL-LED-ICL8001G-Bulb02演示板
EVAL-LED-ICL8001G-Bulb02 Quasi-Resonant Flyback Converter for Phase Cut Dimming with High Power Factor
The EVAL-LED-ICL8001G-Bulb02 demonstrates the single-stage flyback and PFC controller ICL8001G in an LED Bulb application. Its quasiresonant operation mode, primary side control, integrated PFC and phase-cut dimming control makes it the best in class system solution for dimmable LED bulbs.
EVAL-LED-ICL8001G-Bulb02演示板主要特性:
•High, stable efficiency over wide operating range through quasiresonant operation mode
•Primary side side flyback control with integrated PFC and phase-cut dimming
•Energy efficient phase cut dimming
•Power cell for VCC pre-charging with constant current
•Built-in digital soft-start
•Foldback correction and cycle-by-cycle peak current limitation
•VCC over- and under-voltage lockout
•Auto restart mode for short circuit protection
•Adjustable latch-off mode for output overvoltage protection
•Best in class system BOM for dimmable bulbs
图3。EVAL-LED-ICL8001G-Bulb02演示板外形图
图4。EVAL-LED-ICL8001G-Bulb02演示板电路
EVAL-LED-ICL8001G-Bulb02演示板材料清单(BOM):
图5。EVAL-LED-ICL8001G-Bulb02演示板变压器电路图
LED 驱动 技术 模式 谐振 ICL8001G 设计 基于 相关文章:
- 高效地驱动LED(04-23)
- 电源设计小贴士 6:精确测量电源纹波(03-21)
- 构建一个低成本的9V电池电压监控器(07-28)
- 用于低成本高效率离线LED驱动器的初级端调节技术(05-14)
- 电源设计小贴士 7:高效驱动 LED 离线式照明(04-05)
- 隔离式MOSFET驱动器集成电路的功率效率在轻负载时得到改善(07-31)