5V高电压锂离子电池阴极材料研究进展

tteries[J]. Journal of Power Sources, 1997. 68(2): p. 604-608.

[4] Shin, Y. and A. Manthiram, Origin of the high voltage (> 4.5 V) capacity of spinel lithium manganese oxides[J]. Electrochimica Acta, 2003. 48(24): p. 3583-3592.

[5] Howard, W.F. and R.M. Spotnitz, Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries[J]. Journal of Power Sources, 2007. 165(2): p. 887-891.

[6] Ooms, F.G.B., et al., High-voltage LiMgδNi0.5?δMn1.5O4 spinels for Li-ion batteries[J]. Solid State Ionics, 2002. 152-153(0): p. 143-153.

[7] LaFONT, U., et al., Nanosized high voltage cathode material LiMg0.05Ni0.45Mn1[J].5O4: Structural, electrochemical and in situ investigation. Journal of Power Sources, 2009. 189(1): p. 179-184.

[8] Liu, J. and A. Manthiram, Understanding the Improved Electrochemical Performances of Fe-Substituted 5 V Spinel Cathode LiMn1.5Ni0.5O4[J]. The Journal of Physical Chemistry C, 2009. 113(33): p. 15073-15079.

[9] Li, D., et al., Structural and electrochemical characteristics of LiNi0.5?xCo2xMn1.5?xO4 prepared by spray drying process and post-annealing in O2[J]. Journal of Power Sources, 2006. 161(2): p. 1241-1246.

[10] Arunkumar, T.A. and A. Manthiram, Influence of Lattice Parameter Differences on the Electrochemical Performance of the 5 V Spinel LiMn[sub 1.5 - y]Ni[sub 0.5 - z]M[sub y + z]O[sub 4] (M = Li, Mg, Fe, Co, and Zn)[J]. Electrochemical and Solid-State Letters, 2005. 8(8): p. A403-A405.

[11] Oh, S.W., et al., Effects of Co doping on Li[Ni0.5CoxMn1.5?x]O4 spinel materials for 5#xa0;V lithium secondary batteries via Co-precipitation[J]. Journal of Power Sources, 2009. 189(1): p. 752-756.

[12] Ito, A., et al., Influence of Co substitution for Ni and Mn on the structural and electrochemical characteristics of LiNi0.5Mn1.5O4[J]. Journal of Power Sources, 2008. 185(2): p. 1429-1433.

[13] Liu, G.Q., et al., Rate capability of spinel LiCr(0.1)Ni(0.4)Mn(1.5)O(4)[J]. Journal of Alloys and Compounds, 2010. 501(2): p. 233-235.

[14] Arunkumar, T.A. and A. Manthiram, Influence of chromium doping on the electrochemical performance of the 5 V spinel cathode LiMn1.5Ni0.5O4[J]. Electrochimica Acta, 2005. 50(28): p. 5568-5572.

[15] Aklalouch, M., et al., Sub-micrometric LiCr(0.2)Ni(0.4)Mn(1.4)O(4) spinel as 5 V-cathode material exhibiting huge rate capability at 25 and 55 degrees C[J]. Electrochemistry Communications, 2010. 12(4): p. 548-552.

[16] Alcantara, R., et al., Structural and electrochemical study of new LiNi0.5TixMn1.5-xO4 spinel oxides for 5-V cathode materials[J]. Chemistry of Materials, 2003. 15(12): p. 2376-2382.

[17] Kim, J.H., et al., Effect of Ti substitution for Mn on the structure of LiNi0.5Mn1.5-xTixO4 and their electrochemical properties as lithium insertion material[J]. Journal of the Electrochemical Society, 2004. 151(11): p. A1911-A1918.

[18] Liu, G.Q., et al., The electrochemical properties of LiNi(0.5)Mn(1.2)Ti(0.3)O(4) compound[J]. Journal of Alloys and Compounds, 2009. 484(1-2): p. 567-569.

[19] Wang, H.L., et al., Enhancements of rate capability and cyclic performance of spinel LiNi(0.5)Mn(1.5)O(4) by trace Ru-doping[J]. Electrochemistry Communications, 2009. 11(7): p. 1539-1542.

[20] Oh, S.W., et al., Improvement of electrochemical properties of LiNi0.5Mn1.5O4 spinel material by fluorine substitution[J]. Journal of Power Sources, 2006. 157(1): p. 464-470.

[21] Du, G.D., et al., Fluorine-doped LiNi(0.5)Mn(1.5)O(4) for 5 V cathode materials of lithium-ion battery[J]. Materials Research Bulletin, 2008. 43(12): p. 3607-3613.

[22] Xu, X.X., et al., LiNi0.5Mn1.5O3.975F0.05