基于MFRC530设计的ISO14443A无接触读卡技术
时间:04-16
来源:互联网
点击:
本文介绍了MFRC530主要特性,方框图, 接收器电路框图, 定时器模块框图,以及与微处理器的连接框图和典型应用电路图.NXP公司的MFRC530支持ISO14443A通信方案所有层面的高度集成的13.56MHz无接触通信的读卡器IC,它采用杰出的调制和解调技术,内部的发送器能驱动接近100毫米距离的天线,接收器则能有效地实现对来自ISO14443A兼容的转发器信号进行解调,数据速率高达424k波特.
The MF RC530 supports all layers of the ISO14443A communication scheme.
The MF RC530 supports contactless communication using MIFARE? Higher Baudrates.
The internal transmitter part is able to drive an antenna designed for proximity operating distance (up to 100 mm) directly without additional active circuitry.
The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO14443A compatible transponders.
The digital part handles the complete ISO14443A framing and error detection (Parity CRC). Additionally it supports the fast MIFARE? Classic security algorithm to authenticate MIFARE Classic (e.g. MIFARE? Standard, MIFARE? Light) products.
A comfortable parallel interface, which can be directly connected to any 8-bit μ-Processor gives high flexibility for the reader/terminal design. Additionally a SPI compatible interface is supported.
MF RC530主要特性:
? Highly integrated analog circuitry to demodulate and decode card response
? Buffered output drivers to connect an antenna with minimum number of external components
? Proximity operating distance (up to 100 mm)
? Supports ISO 14443A
? Supports MIFARE? Dual Interface Card ICs and supports MIFARE? Classic protocol
? Supports contactless communication with higher baudrates up to 424kbaud
? Crypto1 and secure non-volatile internal key memory
? Pin-compatible to the MF RC500, MF RC531, SL RC400 and CL RC632
? Parallel μ-Processor interface with internal address latch and IRQ line
? SPI compatible interface
? Flexible interrupt handling
? Automatic detection of parallel μ-Processor interface type
? Comfortable 64 byte send and receive FIFO-buffer
? Hard reset with low power function
? Power down mode per software
? Programmable timer
? Unique serial number
? User programmable start-up configuration
? Bit- and byte-oriented framing
? Independent power supply pins for digital, analog and transmitter part
? Internal oscillator buffer to connect 13.56 MHz quartz, optimised for low phase jitter
? Clock frequency filtering
? 3.3 V to 5 V operation for transmitter (antenna driver) in short range and proximity applications
? 3.3 V or 5V operation for the digital part
![](../img/eep-analog/analog-4380va2ax2ujkf2.jpg)
图1.MF RC530方框图
![](../img/eep-analog/analog-4381rgraqlb55hu.jpg)
图2.MF RC530接收器电路框图
![](../img/eep-analog/analog-4382pplgtphn4ju.jpg)
图3.MF RC530定时器模块框图
![](../img/eep-analog/analog-4383kigy0irtcnm.jpg)
图4.MF RC530带共同读/写选通的与微处理器的连接框图
![](../img/eep-analog/analog-4384mbdvaxa25p0.jpg)
图5.MF RC530单独读/写选通的与微处理器的连接框图
![](../img/eep-analog/analog-43855aygq4e0bhl.jpg)
图6.MF RC530带直接匹配天线的应用电路图
The MF RC530 supports all layers of the ISO14443A communication scheme.
The MF RC530 supports contactless communication using MIFARE? Higher Baudrates.
The internal transmitter part is able to drive an antenna designed for proximity operating distance (up to 100 mm) directly without additional active circuitry.
The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO14443A compatible transponders.
The digital part handles the complete ISO14443A framing and error detection (Parity CRC). Additionally it supports the fast MIFARE? Classic security algorithm to authenticate MIFARE Classic (e.g. MIFARE? Standard, MIFARE? Light) products.
A comfortable parallel interface, which can be directly connected to any 8-bit μ-Processor gives high flexibility for the reader/terminal design. Additionally a SPI compatible interface is supported.
MF RC530主要特性:
? Highly integrated analog circuitry to demodulate and decode card response
? Buffered output drivers to connect an antenna with minimum number of external components
? Proximity operating distance (up to 100 mm)
? Supports ISO 14443A
? Supports MIFARE? Dual Interface Card ICs and supports MIFARE? Classic protocol
? Supports contactless communication with higher baudrates up to 424kbaud
? Crypto1 and secure non-volatile internal key memory
? Pin-compatible to the MF RC500, MF RC531, SL RC400 and CL RC632
? Parallel μ-Processor interface with internal address latch and IRQ line
? SPI compatible interface
? Flexible interrupt handling
? Automatic detection of parallel μ-Processor interface type
? Comfortable 64 byte send and receive FIFO-buffer
? Hard reset with low power function
? Power down mode per software
? Programmable timer
? Unique serial number
? User programmable start-up configuration
? Bit- and byte-oriented framing
? Independent power supply pins for digital, analog and transmitter part
? Internal oscillator buffer to connect 13.56 MHz quartz, optimised for low phase jitter
? Clock frequency filtering
? 3.3 V to 5 V operation for transmitter (antenna driver) in short range and proximity applications
? 3.3 V or 5V operation for the digital part
![](../img/eep-analog/analog-4380va2ax2ujkf2.jpg)
图1.MF RC530方框图
![](../img/eep-analog/analog-4381rgraqlb55hu.jpg)
图2.MF RC530接收器电路框图
![](../img/eep-analog/analog-4382pplgtphn4ju.jpg)
图3.MF RC530定时器模块框图
![](../img/eep-analog/analog-4383kigy0irtcnm.jpg)
图4.MF RC530带共同读/写选通的与微处理器的连接框图
![](../img/eep-analog/analog-4384mbdvaxa25p0.jpg)
图5.MF RC530单独读/写选通的与微处理器的连接框图
![](../img/eep-analog/analog-43855aygq4e0bhl.jpg)
图6.MF RC530带直接匹配天线的应用电路图
模拟电路 模拟芯片 德州仪器 放大器 ADI 模拟电子 相关文章:
- 12位串行A/D转换器MAX187的应用(10-06)
- AGC中频放大器设计(下)(10-07)
- 低功耗、3V工作电压、精度0.05% 的A/D变换器(10-09)
- PIC16C5X单片机睡眠状态的键唤醒方法(11-16)
- 用简化方法对高可用性系统中的电源进行数字化管理(10-02)
- 利用GM6801实现智能快速充电器设计(11-20)