LTE允许小区驻留但不允许接入，应调整哪些参数

是否如下即可？

SIB1->cellAccessRelatedInfo->cellBarred{notBarred}
SIB2->ac-BarringInfo->ac-BarringForEmergency{FALSE}
SIB2->ac-BarringInfo->ac-BarringForMO-Signalling->ac-BarringFactor{p00}
SIB2->ac-BarringInfo->ac-BarringForMO-Signalling->ac-BarringTimes{s512}
SIB2->ac-BarringInfo->ac-BarringForMO-Signalling->ac-BarringForSpecialAC{0}
SIB2->ac-BarringInfo->ac-BarringForMO-Data->ac-BarringFactor{p00}
SIB2->ac-BarringInfo->ac-BarringForMO-Data->ac-BarringTimes{s512}
SIB2->ac-BarringInfo->ac-BarringForMO-Data->ac-BarringForSpecialAC{0}

我觉得设置还是有点问题，根据协议规定，小于ac-BarringFactor{p00}，是可以的，否则就会被bar掉。是否设置为最大值

If the random number drawn by the UE is lower than this value, access is allowed. Otherwise the access is barred. The values are interpreted in the range [0,1): p00 = 0, p05 = 0.05, p10 = 0.10,…,p95 = 0.95. Values other than p00 can only be set if all bits of the corresponding ac-BarringForSpecialAC are set to 0.