ST发布运行速度比STM32F7快两倍的高性能Cortex-M7 MCU STM32H7系列新品 主频高达400MHz

先来看看基本参数和供货时间：400MHZ运行速度   2017年供货

基本参数：

• AXI and multi-AHB bus matrixes for interconnecting core, peripherals and memories
• 16 Kbytes +16 Kbytes of I-cache and D-cache
• Up to 2 Mbytes of embedded dual-bank Flash memory, with ECC and Read-While-Write capability
• A high-speed master direct memory access (MDMA) controller, two dual-port DMAs with FIFO and request router capabilities for optimal peripheral management, and one additional DMA
• Chrom-ART acceleration for efficient 2D image copy and double-precision FPU are also part of the acceleration features available in the device
• Peripheral speed independent from CPU speed (dual-clock support) allowing system clock changes without any impact on peripheral operations
• Even more peripherals, such as four serial audio interfaces (SAI) with SPDIF output support, three full-duplex I2S interfaces, a SPDIF input interface supporting four inputs, two USB OTG with dedicated power supply and Dual-mode Quad-SPI interface, two FD-CAN controllers, a high-resolution timer, a TFT-LCD controller, a JPEG codec, two SDIO interfaces and many other analog peripherals including three fast 14-bit ADCs, two comparators and two operational amplifiers.
• 1 Mbyte of SRAM with a scattered architecture:
  
  • 192 Kbytes of TCM RAM (including 64 Kbytes of ITCM RAM and 128 Kbytes of DTCM RAM for time-critical routines and data), 512 Kbytes, 288 Kbytes and 64 Kbytes of user SRAM, and 4 Kbytes of SRAM in backup domain to keep data in the lowest power modes
    
  
  

Security

Authenticate and protect your software IP while performing initial programming in production or firmware upgrades in the field.

Power efficiency

• The multi-power domains architecture allows the different power domains to be set in low-power mode to optimize the power efficiency. In addition to the main regulator featuring voltage scaling to supply the core in different voltage ranges during Run and Stop modes, the device also embeds a USB regulator to supply the embedded physical layer (PHY) and a backup regulator.
• 278 μ/MHz typical @VDD = 3.3 V and 25 °C  in Run mode (peripherals off)
• 7 μA in Standby mode (low-power mode)
  

Compatibility

• Cortex-M7 is backwards compatible with the Cortex-M4 instruction set
• STM32H7 series is pin-to-pin compatible with the STM32F7 series for common packages, and compatible with the STM32F4 series for most of the common packages *
  

好东西，，，何时有板子送

一直在M系列发展，期待a系列的st