关于16灯花样流水灯的程序问题 高手请进

我用keil编译程序 生成hex文件 导入89c51芯片以后 接入电路 始终无法得到预期的效果 下面是代码 和我们实验的电路图 请高手指点

#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
uchar code Pattern_P0[]=
{
0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,
0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
uchar code Pattern_P2[]=
{
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,
0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,
0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
//延时
void DelayMS(uint x)
{
uchar i;
while(x--)
{
  for(i=0;i<120;i++);
}
}
//主程序
void main()
{
uchar i;
while(1)
{ //从数组中读取数据送至 P0 和 P2 口显示
  for(i=0;i<136;i++)
  {
   P0=Pattern_P0;
   P2=Pattern_P2;
   DelayMS(100);
  }
}
}

P0=Pattern_P0[i];
   P2=Pattern_P2[i];

我来试试！

100ms，每一秒钟变换10次，你是什么都看不到的，要看见，每秒变换要低于3次，一般采用半秒或一秒

楼上正解。

楼上确实高，这个百度上也有，大家可以去瞅瞅

延时程序带参的，100*120次，是1S多了的啊，主函数位移那个P0,P2不带变量的么
Pattern还没用过，我用的都是crol或cror

呵呵  就是你的数组定义是对的   但是延时函数是带参数的  如二楼说的一样  还有延时程序应该可以吧！

后面循环的时候引用数组的时候没有参数啊P0=Pattern_P0;
   P2=Pattern_P2;
如2楼的：P0=Pattern_P0[i];
   P2=Pattern_P2[i];
另延时函数的时间可以适当长一点，

#include<reg51.h>
#include<reg51.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
void delay(uint i)
{   uchar t;
    while (i--)
    {for (t=0;t<120;t++);
    }
   }
   void main()     
   { P1=0xfe;
   while(1)
     {P1=_crol_(P1,1);
  delay(500);
  }   
    }

怎样让他反复亮?