size of the substrate in ie3d
时间：04-06
整理：3721RD
点击：
Hello
i want to ask that is it true that the size of substrate should be little bit bigger than the size of the ground plane at the time of fabrication.
i have design an antenna using ie3d and now i am going to fabricate it, the size of ground plane i have used for my simulation is 200mm x 200mm so what should be the dimension of the substrate.
thanks
vishal
i want to ask that is it true that the size of substrate should be little bit bigger than the size of the ground plane at the time of fabrication.
i have design an antenna using ie3d and now i am going to fabricate it, the size of ground plane i have used for my simulation is 200mm x 200mm so what should be the dimension of the substrate.
thanks
vishal
- Physical size of antenna in terms of guided wavelenght
- PLL Synthesized radio
- What size components should I use with ATF-55143
- what size end launch SMA would best fit a 1mm FR4 board?
- Calculation domain size for EM simulations - Does a rule of thumb exist?
- How to use Synthesizer PLL ICs with Integrated VCO to make harmonic VCO(6GHz->24Ghz)?