replacement of a modulator in FM encoder
时间：04-06
整理：3721RD
点击：
hey
http://home.telkomsa.net/jeanward/im...atic_large.gif
this is the circuit o FM encoder, i have simulated this circuit on proteus, got the required results.
but doing on hardware cause problem. the modulator is not producing the required output. the FFT of the signal before the bandpass filter shows lots of harmonics as it should be , but the final output also shows these harmonics outside the range of bandpass filter. bandpass filter has frequency range of 23KHz to 53Khz.
any idea abt the replacement of the modulator?
http://home.telkomsa.net/jeanward/im...atic_large.gif
this is the circuit o FM encoder, i have simulated this circuit on proteus, got the required results.
but doing on hardware cause problem. the modulator is not producing the required output. the FFT of the signal before the bandpass filter shows lots of harmonics as it should be , but the final output also shows these harmonics outside the range of bandpass filter. bandpass filter has frequency range of 23KHz to 53Khz.
any idea abt the replacement of the modulator?
Thats whats meant to happen. You are modulating a square wave so you expect modulation products at Fc, 3 X Fc, 5 X Fc, etc. thats why the filter is there, to select the right ones ( FC, 38 KHZ +- sidebands).
Frank
yes Frank, you are right