Voltage Referrence circuit
时间：04-04
整理：3721RD
点击：
Hi All,
Is that possible to design lossless voltage reference circuit to give the reference voltage has 30mv from VDD = 300mv.
Is that possible to design lossless voltage reference circuit to give the reference voltage has 30mv from VDD = 300mv.
Theoretically you could charge a 2-capacitor stack. Choose values so one charges to 30mV, the other to 270mV. Once charged, there are no losses.
I imagine there are more requirements for the reference circuit than being "lossless", e.g. regulation, output current?
Voltage Referrence circuit 相关文章：
- Induced voltages on transmission line by plane wave in HFSS
- Klystron output voltage, cavity field strength
- Negative voltage needed in K-band
- How to set the bias voltage of the BJT in Gilbert mixer
- is DC voltage gain not an important issue to consider in LNA designing?
- Power (Voltage / Current) inducted in rectangle antenna.