微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 天线设计和射频技术 > Shorted hole in SAP (Shorted Annular Patch) using HFSS

Shorted hole in SAP (Shorted Annular Patch) using HFSS

时间:04-04 整理:3721RD 点击:
Hi,

can anyone please help me designing a microstrip patch antenna in HFSS.

I have troubles creating the shorted ring, how should i do so that the patch and the ground are shorted using a hole with a huge radius?

thank you

you should make a cylinder that is equl to the distance between the ground and patch in length.subtract the cylinder from the patch, ground and substrate. Then you should make an object from surface . In this way you will have a surface hollow cylinder. Use thicken sheet to add thickness to the metallic via.
Regards

what kind of boundary should I apply?, I′ve substracted the cylinder from all the layers, after that I selected the hollow cylinder with "select surface", after that "modeler->surface->create object from face", and finally I made that face with "Perfect E Boundary", is that correct? or should I give it another property so that it acts as a shorted hole like made it "pec "?



thank u so much

yes this is enough. you may also add thickness to the cylinder using thicken sheet

but, if i decided to add thickness, what material should i use?

you may assign the material as pec.

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top