Help a new CST user with microstrip antennas simulation
时间：03-29
整理：3721RD
点击：
Hello, guys,
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!
user CST microstrip 相关文章：
- CST Postprocessing of multiple S-parameters (single frequency parameter extraction)
- Shielding Simulation in CST
- Illegal usage of S-Matrix, No impedance found error in cst
- Line impedance in CST
- CST dual polarized H-slot antenna is very well matched but has poor total efficiency
- CST Matlab Interface, Export Far Field Result Automatically