cst export plot

Hi

I would like to export the data from a antenne simulation. If I choose to plot the directivity, the data is only in dB:

phi(angle) | theta(angle) | abs | theta_dB | phi_dB | Left pol. | Right pol.

I have tried to illustrate the data export above.

My question is is it possible to get the data as real and imaginary parts or magnitude and angle. I should mention that I am not very familiar with CST. If someone knows another setup so this is possible, would be very appriciated.

Thanks

Hello Tyassin,

you already have mag and angle in your export. E.g. your phi/Theta is you varying angle and theta/Phi_dB arey our magnitude. Open it in excel and delete the col that you don't need. If you do not want in in dB, you can go to plot properties and change the scale to linear.

Hope this is want you require.

Element7k

Hello Tyassin,

you already have mag and angle in your export. E.g. your phi/Theta is you varying angle and theta/Phi_dB arey our magnitude. Open it in excel and delete the col that you don't need. If you do not want in in dB, you can go to plot properties and change the scale to linear.

Hope this is want you require.

Element7k