微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > RFIC设计学习交流 > 问个关于电感Q的问题,困扰已久

问个关于电感Q的问题,困扰已久

时间:10-02 整理:3721RD 点击:
电感Q=w*L/Rs,基本都这么算的吧
可是看了些电感产品,感觉不对啊,比如:
一个82nH电感,厂家提供的信息是:最小Q=50 at 500MHz,最大DC resistance=0.42 ohms。
如果按上面那个式子算,500MHz下最小Q=600+,这个算出来的值一看就觉得不对,但也不知道错在哪里?请大侠指教

the resistance of inductance is 0.42ohm at dc frequency.
when the frequency increases, the resistance of inductance will increase due to the skin effect. so the Q is much smaller than your calculation due to the loss at high frequency.

The Q equation is based on a simple L-Rs model, while all actual inductors are much more complex than that.In addition to the skin effect mentioned above, parasitic capacitance, eddy current and other effects may kick in and reduce your Q.

Thank you!

goooooooooooooood

受教啦

高频的Q有很多影响,比如eddy current,skin effect,不能用dc resistance算

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top