Hspice Print 語句請教
.dcvgs02.5v0.5vvds02.5v0.1v
.print i(m1)
m11200nchw=0.45ul=0.24u
vgs201v
vds10dc2.5v
.end
用於測試MOS I-V為什麼
**error** could not open output spool file scratch
用.plot替換.print就正常。請各位指教。
我用的是Hspice_C-2009.09，從論壇裡下的.
****** HSPICE -- C-2009.09 32-BIT (Aug 24 2009) winnt ******
Copyright (C) 2009 Synopsys, Inc. All Rights Reserved.
Unpublished-rights reserved under US copyright laws.
This program is protected by law and is subject to the
terms and conditions of the license agreement from Synopsys.
Use of this program is your acceptance to be bound by the
license agreement. HSPICE is the trademark of Synopsys, Inc.
Input File: D:\Synopsys\HW\test_model.sp
lic:
lic: FLEXlm: v8.5b
lic: USER:JingXinHOSTNAME: xdtu
lic: HOSTID: 00e04c7d4f14PID:2956
lic: Using FLEXlm license file:
lic: C:\Flexlm\Hspice_2007-03.lic
lic: Checkout 1 hspice
lic: License/Maintenance for hspice will expire on 31-dec-2020/2007.9
lic: NODE LOCKED license on hostid 00e04c7d4f14
lic:
Init: read install configuration file: D:\synopsys\Hspice_C-2009.09\meta.cfg
**info**the obsolete option acct is ignored
scientific notation:
a=10**-18f=10**-15p=10**-12n=10**-9u=10**-6
m=10**-3k=10**3x=10**6g=10**9
circuit parameter definitions
parameter=value
constants- tnomktvtgapsini
298.15004.116e-2125.6918m1.11561.256e+16
1****** HSPICE -- C-2009.09 32-BIT (Aug 24 2009) winnt ******
******
*test_model.sp
******circuit element summary tnom=25.000 temp=25.000 *****
**** independent sources
namenode1node2dc voltac magac phasetype
vgs201.00000.0.dc
vds102.50000.0.dc
**** mosfets
**** BSIM3v3 Model (Level49 or Level53)
element name0:m1
drain0:1
gate0:2
source0:0
bulk0:0
model0:nch.9
w eff410.0000n
l eff230.0000n
rd eff2.6250
rs eff2.6250
cdsat975.4725a
cssat975.4725a
capbd1.2170f
capbs1.2170f
temp25.0000
aic
nf1.0000
sa0.
sb0.
sd0.
saeff0.
sbeff0.
mulu01.0000
mulua1.0000
mulub1.0000
1****** HSPICE -- C-2009.09 32-BIT (Aug 24 2009) winnt ******
******
*test_model.sp
******element node table
0vgsvdsm1:sm1:b
1vdsm1:d
2vgsm1:g
*****************************************************************
******option summary
******
runlvl= 6bypass= 2
**error** could not open output spool file scratch
a critical system resource is inaccessible or exhausted.
the most common causes for this are:
- no write permission for this directory.
- /tmp space or user scratch space exhausted.
- this disk may be full.
OR hspice running on a Vax with NFS mounted file systems.
There have been problems with TGV's Multinet.
be sure to contact your system manager.
出錯的lis
.option list node post acct
.dcvgs02.5v0.5vvds02.5v0.1v
.print i(m1)
m11200nchw=0.45ul=0.24u
vgs201v
vds10dc2.5v
.lib 'mix0255.l' TT
.end
.lis file :
******dc transfer curves tnom=25.000 temp=25.000 *****
*** source0:vds=2.5000***
x
voltcurrent
m1
0.5.7301p
500.00000m435.3956n
1.0000040.9238u
1.50000115.2562u
2.00000194.1247u
2.50000271.8399u
y
***** job concluded
tongwen
我的之前就有类似错误。还以为是计算机的设置问题