如何做一个开环增益为8dB，带宽1MHz的运放？
时间：10-02
整理：3721RD
点击：
最好是折叠运放，增益怎么做小?而且还能驱动30pF负载电容。
8DB? 还真得期待牛人来。
8dB ?为什么要做成开环的?做成闭环的一样可以啊 而且还比较准确
try single stage with diode-connected load. Give your slew rate requirement otherwise it's meaningless to talk about driving capability. Don't expect good gain accuracy from this simple structure. For accuracy, make use of feedback
问题本身就有问题，go back see your book.
因为要做功放，我想降低运放失调对电路的影响。
Common source with resistive loading
why using open loop?
4楼正解~
我不想要二极管连接方式作负载。
开环8dB。稳定性多差啊。
宝宝，你做个放大器就可以了，差分放大器，在输出端加源极跟随器驱动后级负载就可以了。开环的哈
qiujieda a