UCD3138 用于 LLC 实验

最近我使用UCD3138提供的范例Lab_4

成功把BUCK CLOSE LOOP

想尝试用在LLC电路

把Lab_4程式都改成Resonant

以下是我LLC电路：

但是我的DPWM0_A跟DPWM0_B没任何输出

请问是我程式的问题吗? 谢谢

main.c：

#define MAIN 1

#include "system_defines.h"
#include "Cyclone_Device.h"
#include "pmbus_commands.h"
#include "pmbus_common.h"
#include "pmbus_topology.h"
#include "variables.h"
#include "functions.h"
#include "software_interrupts.h"
#include "cyclone_defines.h"
#include "stdio.h"

void init_dpwm0(void)
{
	Uint32 dead_time_1_local;
	Uint32 dead_time_3_local;
	Uint32 clamp_value;
	
	dead_time_1_local = (pmbus_dcdc_config[0].dead_time_1 + 8) >> 4;
	dead_time_3_local = (pmbus_dcdc_config[0].dead_time_3 + 8) >> 4;
	clamp_value = (((Uint64)pmbus_dcdc_config[0].dead_time_2 * ((1 << 23) - 1)) / (pmbus_dcdc_config[0].max_period * 8));
	
	Dpwm0Regs.DPWMCTRL0.bit.PWM_EN = 1;						//1 = Enable PWM
	Dpwm0Regs.DPWMCTRL0.bit.CLA_EN = 1;						//1 = Enable CLA(PID)
	
	Dpwm0Regs.DPWMCTRL0.bit.PWM_MODE = 1;					//1 = Resonant Mode
	Dpwm0Regs.DPWMCTRL0.bit.RESON_MODE_FIXED_DUTY_EN = 0;	//0 = Duty cycle set by Filter duty
	Dpwm0Regs.DPWMCTRL0.bit.CBC_ADV_CNT_EN = 0;				//0 = PWM_A and PWM_B operate independently
	
	Dpwm0Regs.DPWMCTRL1.bit.HIRES_DIS = 0; 					//0 = Enable High Resolution logic
	Dpwm0Regs.DPWMCTRL1.bit.CHECK_OVERRIDE = 1;				//1 = Disable	//Bug
	Dpwm0Regs.DPWMCTRL1.bit.EVENT_UP_SEL = 1; 				//1 = Update End Period Mode at End of Period
	
	Dpwm0Regs.DPWMCTRL2.bit.RESON_DEADTIME_COMP_EN = 1;		//1 = CLA Duty form Filter minus deadtime adjustment
	Dpwm0Regs.DPWMCTRL2.bit.FILTER_DUTY_SEL = 2; 			//2 = DPWM Resonant Duty Register
	
	Dpwm0Regs.DPWMPHASETRIG.bit.PHASE_TRIGGER = 2;			//8ns phase delay
	
	Dpwm0Regs.DPWMINT.bit.PRD_INT_SCALE = 2; 				//interrupt
    Dpwm0Regs.DPWMINT.bit.PRD_INT_EN = 1;					//interrupt
	
	Dpwm0Regs.DPWMCTRL1.bit.GLOBAL_PERIOD_EN = 1;			//1 = Event calculations use Global Period register
	
	Dpwm0Regs.DPWMCTRL0.bit.MSYNC_SLAVE_EN = 0;				//0 = PWM not synchronized to another PWM channel
	LoopMuxRegs.DPWMMUX.bit.DPWM0_SYNC_SEL = 0;				//0 = DPWM0 with DPWM0 Sync
	Dpwm0Regs.DPWMPHASETRIG.all = 32;						//128ns phase delay
	
	Dpwm0Regs.DPWMEV1.bit.EVENT1 = dead_time_1_local;
	Dpwm0Regs.DPWMEV2.bit.EVENT2 = pmbus_dcdc_config[0].min_period * 8 + dead_time_1_local * 16 - pmbus_dcdc_config[0].dead_time_2;
	Dpwm0Regs.DPWMEV3.bit.EVENT3 = pmbus_dcdc_config[0].min_period * 8 + dead_time_1_local * 16;
	Dpwm0Regs.DPWMEV4.bit.EVENT4 = pmbus_dcdc_config[0].min_period * 16 - pmbus_dcdc_config[0].dead_time_2 + dead_time_1_local * 16;
	Dpwm0Regs.DPWMPRD.bit.PRD =	pmbus_dcdc_config[0].min_period;
	Dpwm0Regs.DPWMCYCADJA.bit.CYCLE_ADJUST_A = (int16)(-DEADTIME2);
	Dpwm0Regs.DPWMCYCADJB.bit.CYCLE_ADJUST_B = (int16)(-DEADTIME2);
	Dpwm0Regs.DPWMRESDUTY.bit.RESONANT_DUTY  = (pmbus_dcdc_config[0].max_period + 1) >> 1;
	
	Filter0Regs.FILTERYNCLPLO.all = clamp_value;
	Filter1Regs.FILTERYNCLPLO.all = clamp_value;
	LoopMuxRegs.FILTERKCOMPA.bit.KCOMP0 = pmbus_dcdc_config[0].max_period;

}

void init_filter0(void)
{
	Filter0Regs.FILTERCTRL.bit.PERIOD_MULT_SEL = 1;		//1 = KComp received from Loop Mux module
	Filter0Regs.FILTERCTRL.bit.OUTPUT_MULT_SEL = 3;		//3 = Resonant Duty value received from DPWM Module
	Filter0Regs.FILTERCTRL.bit.FILTER_EN = 1;			//1 = Enables Filter operation
	Filter0Regs.FILTERCTRL.bit.OUTPUT_SCALE = 0;		//0 = No shift
	Filter0Regs.FILTERCTRL.bit.USE_CPU_SAMPLE = 0;		//0= Filter Mode, input data received from EADC
	

	Filter0Regs.FILTERKPCOEF0.bit.KP_COEF_0 = 1;
	Filter0Regs.FILTERKICOEF0.bit.KI_COEF_0 = 1;
	Filter0Regs.FILTERKDCOEF0.bit.KD_COEF_0 = 0;
	Filter0Regs.FILTERKDALPHA.bit.KD_ALPHA_0 = -1;

	Filter0Regs.FILTERKICLPHI.bit.KI_CLAMP_HIGH = 0x7FFFFF;
    Filter0Regs.FILTERKICLPLO.bit.KI_CLAMP_LOW = 0;

	Filter0Regs.FILTEROCLPHI.bit.OUTPUT_CLAMP_HIGH = 0x7FFFFF;
	Filter0Regs.FILTEROCLPLO.bit.OUTPUT_CLAMP_LOW = 0;
	
	//LoopMuxRegs.FILTERKCOMPA.bit.KCOMP0 = (PERIOD/2) >> 4; //KCOMP is at 4 ns, period is at 250 ps
}

void init_loop_mux(void)
{
	LoopMuxRegs.FILTERMUX.bit.FILTER0_PER_SEL = 0;		//0 = Filter0 form DPWM0
	LoopMuxRegs.FILTERMUX.bit.FILTER0_KCOMP_SEL = 0;	//0 = Filter0 form KCOMP0
	
	LoopMuxRegs.DPWMMUX.bit.DPWM0_FILTER_SEL = 0;		//0 = DPWM0 duty cycle(resonant period) from Filter0
	LoopMuxRegs.DPWMMUX.bit.DPWM1_FILTER_SEL = 0;		//0 = DPWM1 duty cycle(resonant period) from Filter0
	LoopMuxRegs.DPWMMUX.bit.DPWM1_SYNC_SEL = 0;			//0 = DPWM1 master sync with DPWM0 sync
	
	LoopMuxRegs.FILTERMUX.bit.FILTER0_FE_SEL = 0;		//0 = Filter0 form Front End0
	
	LoopMuxRegs.LLENTHRESH.bit.CYCLE_CNT_THRESH = 0;	//

	//LoopMuxRegs.SAMPTRIGCTRL.bit.FE0_TRIG_DPWM0_EN = 1; //use DPWM0 for filter0 sample trigger
}

void global_enable(void)			//P.188
{
	LoopMuxRegs.GLBEN.all = 0x101;
}

void init_front_end0(void)
{
	FeCtrl0Regs.EADCDAC.bit.DAC_VALUE = 0;			//1bit=1.5625mV	//range 0V~1.6V	//Ref=0.8V
	FeCtrl0Regs.EADCCTRL.bit.AFE_GAIN = 3;			//
	FeCtrl0Regs.EADCCTRL.bit.SCFE_CLK_div_2 = 0;	//0 = 16MHz sampling
	FeCtrl0Regs.EADCCTRL.bit.EADC_MODE = 0;			//0 = Standard mode, EADC samples based on sample triggers from DPWM module
	FeCtrl0Regs.EADCCTRL.bit.AVG_MODE_SEL = 2;		//2 = 8x Averaging mode
	FeCtrl0Regs.EADCCTRL.bit.AVG_SPATIAL_EN = 1;	//
}

void main()
{
	volatile unsigned int dummy;
	if(GioRegs.FAULTIN.bit.FLT3_IN == 0)// Re-Check pin assignment (ADC_EXT/SYNC may be?)
	{
		clear_integrity_word();
	}

	MiscAnalogRegs.CLKTRIM.bit.HFO_LN_FILTER_EN = 0;

	init_pmbus(0x58);
	init_dpwm0();
	init_filter0();
	init_loop_mux();
	init_front_end0();
	global_enable();
	for(;;)
	{
	  pmbus_handler();
	}
}


//#pragma INTERRUPT(c_int00,RESET)

void c_int00(void)
{
	main();
}

我使用UCD3138OL64EVM-031 Rev.A

现在，问题解决了吗，我发现，我的控制板也是没有PWM输出波形

您好，我正在使用UCD3138，我想问一下您可有开发板？有的话哪儿买的？还有您的例程代码从哪儿得到的？方便告知吗？我急需啊

Hi

   可以发成为新帖吗？