BQ76930电池电压问题

在按TS1激活之前10块电池总电压是40V，激活后测量只有26V，这是正常的吗？原理图在附件已上传。

这样肯定不正常。

每节电芯的电压测量都正常吗？

问题解决了，谢谢

请问你们有无STM32与BQ76930通信的例程啊，我写的程序读出来的数据不正确啊，在组织程序方面的具体有哪些步骤？我的邮箱2982148529@qq.com,麻烦有例程给我发一下吧，电路是按官方手册上面画的。

可以参考下面的例程。MCU是TI的MSP430。

http://www.ti.com/lit/zip/tidcbb1

TIDA-00449 Firmware 

Description

The TI Design TIDA-00449 is a ready, tested hardware platform for 10 cells in series Battery Pack Monitoring, Balancing and Protection for Power Tools. Power Tools increasingly uses highly power dense Li-Ion or Li-Iron Phosphate cells based battery packs that need to be protected from explosion due to incorrect charging or discharging. The TIDA-00449 also achieves thermal requirements for power tool battery packs when discharging at high continuous current.

你们的参考程序主函数就这么点东西，实现了什么功能？有点看得不是很懂，求解析一下下面这段程序的意思和实现功能，谢谢。

int main(void)
{
int Result;

WDTCTL = WDTPW | WDTHOLD; // Stop watchdog timer

DISABLE_INT;

ClockInitialise();

I2CInitialise();

InitialisebqMaximo();

while(1)
{
Result = UpdateVoltageFromBqMaximo();
}

return Result;
}

int UpdateVoltageFromBqMaximo()
{
int Result = 0, i = 0;
unsigned char *pRawADCData = NULL;
unsigned int iTemp = 0;
unsigned long lTemp = 0;

Result = I2CReadBlockWithCRC(BQMAXIMO, \
VC1_HI_BYTE, \
&(Registers.VCell1.VCell1Byte.VC1_HI), \
30);

pRawADCData = &Registers.VCell1.VCell1Byte.VC1_HI;
for (i = 0; i < 15; i++)
{
iTemp = (unsigned int)(*pRawADCData << 8) + *(pRawADCData + 1);
lTemp = ((unsigned long)iTemp * iGain)/1000;
lTemp += Registers.ADCOffset;
CellVoltage[i] = lTemp;
pRawADCData += 2;
}

return Result;
}

int InitialisebqMaximo()
{
int result = 0;

Registers.Protect1.Protect1Bit.SCD_DELAY = SCDDelay;
Registers.Protect1.Protect1Bit.SCD_THRESH = SCDThresh;
Registers.Protect2.Protect2Bit.OCD_DELAY = OCDDelay;
Registers.Protect2.Protect2Bit.OCD_THRESH = OCDThresh;
Registers.Protect3.Protect3Bit.OV_DELAY = OVDelay;
Registers.Protect3.Protect3Bit.UV_DELAY = UVDelay;

result = GetADCGainOffset();

Gain = (365 + ((Registers.ADCGain1.ADCGain1Byte & 0x0C) << 1) + ((Registers.ADCGain2.ADCGain2Byte & 0xE0)>> 5)) / 1000.0;
iGain = 365 + ((Registers.ADCGain1.ADCGain1Byte & 0x0C) << 1) + ((Registers.ADCGain2.ADCGain2Byte & 0xE0)>> 5);

Registers.OVTrip = (unsigned char)((((unsigned short)((OVPThreshold - Registers.ADCOffset)/Gain + 0.5) - OV_THRESH_BASE) >> 4) & 0xFF);
Registers.UVTrip = (unsigned char)((((unsigned short)((UVPThreshold - Registers.ADCOffset)/Gain + 0.5) - UV_THRESH_BASE) >> 4) & 0xFF);

result = ConfigureBqMaximo();

return result;
}