openlava 在virtuoso里面的设置
时间：03-15
整理：3721RD
点击：
大家好！
我在centOS6.7 安装成功了 Openlava4.0, 用行命令方式可以bsub 任务。 队列也是工作的。
但是怎么让ADE里面跑Spectre时也自动丢任务上队列呢? 也就是virtuoso与openlava的接口怎么设置呢?
目前我的状态是， 在ADE提交distribute任务后，CIW报错：
*Error* lbpsGetComponentHandle: FAIlure initializing LSF using lsb_init(): Failed in an LSF library call: Unable to open file ego.conf
Verify that your LSF distribution (for example, bsub) works
correctly on this host.If it does, then this error might have
occurred because the Cadence executable has different permissions
than the LSF executables, or uses an LSF client library version
which is incompatible with your LSF distribution.
The Cadence /tools/IC617.721/tools/bin/64bit/cdsfrb_lsf7.0
executable uses the LSF 7.02 client library.
Please consult your LSF administrator for help in resolving these issues.
lsb_init() 和ego.conf在哪里呢?
拜托有经验的同学指导！多谢！必谢！
我在centOS6.7 安装成功了 Openlava4.0, 用行命令方式可以bsub 任务。 队列也是工作的。
但是怎么让ADE里面跑Spectre时也自动丢任务上队列呢? 也就是virtuoso与openlava的接口怎么设置呢?
目前我的状态是， 在ADE提交distribute任务后，CIW报错：
*Error* lbpsGetComponentHandle: FAIlure initializing LSF using lsb_init(): Failed in an LSF library call: Unable to open file ego.conf
Verify that your LSF distribution (for example, bsub) works
correctly on this host.If it does, then this error might have
occurred because the Cadence executable has different permissions
than the LSF executables, or uses an LSF client library version
which is incompatible with your LSF distribution.
The Cadence /tools/IC617.721/tools/bin/64bit/cdsfrb_lsf7.0
executable uses the LSF 7.02 client library.
Please consult your LSF administrator for help in resolving these issues.
lsb_init() 和ego.conf在哪里呢?
拜托有经验的同学指导！多谢！必谢！
我也遇到了同样的问题。一起联系解决啊?我把EGO disable了，没现在这个问题了，但也没成功
请问你解决了这个问题吗?谢谢
ogv,不是lsf了
@joycechou1110， 请问怎么联系?
请教了朋友，设置如下环境变量后可解决问题。 希望能帮助到同学们！
setenv LBS_CLUSTER_MASTER server01
setenv LBS_BASE_SYSTEM LBS_DEFAULT
setenv LSF_ENVDIR /ecad/openlava/etc
setenv LSF_SERVERDIR /ecad/openlava/sbin
setenv LSF_LIBDIR /ecad/openlava/lib
setenv LSF_BINDIR /ecad/openlava/bin
set path = ($path /ecad/openlava/bin)