Cadence ic610 启动时CIW的报错

CADENCE启动没有问题，但是输入icfb &之后，CIW过一段时候会开始报错，是关于那个 .cdsinit文件的。我已经将.../tools/dfII/samples/local 拷到 .../tools/dfII里面，并且也把得到的.../tools/dfII/local里那个cdsinit改名为.cdsinit 。这个报错不影响我使用CADENCE，但是这么多错误实在让人费解。请求牛人帮助解决，thanks a ton.
具体报错引用如下：
Use/reproduction/disclosure is subject to restriction
set forth at FAR 1252.227-19 or its equivalent.
Program:@(#)$CDS: virtuoso.exe version 6.1.0 10/10/2006 14:09 (cds126047) $
Sub version:sub-version IC6.1.0.243 (32-bit addresses)
Loading geView.cxt
Loading LVS.cxt
Loading layerProc.cxt
Loading xlUI.cxt
Loading auCore.cxt
Loading schView.cxt
Loading selectSv.cxt
Loading vhdl.cxt
Loading seismic.cxt
Loading ams.cxt
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - dfII
This file should be copied as <cds_install_dir>/local/.cdsinit
^
SYNTAX ERROR found at line 5 column 59 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: unbound variable - customized
*WARNING* (reader): suspicious newline found after the operator .
read and executed when the Design Framework II software starts.
^
SYNTAX ERROR found at line 7 column 66 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - This
*WARNING* (reader): suspicious newline found after the operator .
application bind key files.
^
SYNTAX ERROR found at line 10 column 31 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
*WARNING* (reader): suspicious newline found after the operator .
./.cdsinit - .cdsinit in the working directory
^
SYNTAX ERROR found at line 20 column 8 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
~/.cdsinit - .cdsinit in the user's home directory
^
SYNTAX ERROR found at line 21 column 8 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
This site file checks if a .cdsinit exists in the working directory
^
SYNTAX ERROR found at line 23 column 32 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
and executes it. If .cdsinit does not exist in the user's working
^
SYNTAX ERROR found at line 24 column 25 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
directory then ~/.cdsinit is executed if it exists.
^
SYNTAX ERROR found at line 25 column 21 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
###################################################################
^
SYNTAX ERROR found at line 28 column 67 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - Please
*Error* eval: undefined function - customizing
*WARNING* (reader): suspicious newline found after the operator .
for a list of sample files supplied.
^
SYNTAX ERROR found at line 31 column 39 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - There
*Error* eval: unbound variable - relevant
*WARNING* (reader): suspicious newline found after the operator .
be loaded if you want bind keys defined for that application.
^
SYNTAX ERROR found at line 35 column 64 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
See section LOAD APPLICATION BIND KEY DEFINITIONS.
^
SYNTAX ERROR found at line 36 column 53 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
###################################################################
^
SYNTAX ERROR found at line 37 column 67 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - In
X resource must be set in the .Xdefaults or .xresources file
^
SYNTAX ERROR found at line 40 column 35 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
pertAIning to your hardware platform.
^
SYNTAX ERROR found at line 41 column 40 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: unbound variable - Mwm
*Error* eval: undefined function - After
*Error* eval: unbound variable - xrdb
*WARNING* (reader): suspicious newline found after the operator .
and restart the Motif window manager.
^
SYNTAX ERROR found at line 49 column 40 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - The
*Error* eval: undefined function - adds
*Error* eval: undefined function - For
*WARNING* (reader): suspicious newline found after the operator .
string.
^
SYNTAX ERROR found at line 57 column 10 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - There
*WARNING* (reader): suspicious newline found after the operator .
follow.
^
SYNTAX ERROR found at line 59 column 10 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*Error* eval: undefined function - This
*WARNING* (reader): suspicious newline found after the operator .
independant of the exact installation path.
^
SYNTAX ERROR found at line 61 column 46 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
The function let() creates local variables ( example: libPath ).
^
SYNTAX ERROR found at line 63 column 68 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*WARNING* (reader): suspicious newline found after the operator .
This makes sure that any global variables are not accidentally modified.
^
SYNTAX ERROR found at line 64 column 75 of file .cdsinit
*Error* lineread/read: syntax error encountered in input
*/
^
SYNTAX ERROR found at line 66 column 2 of file .cdsinit
*WARNING* too many lookahead chars being pushed back, may lose input.
*Error* lineread/read: syntax error encountered in input
END OF SITE CUSTOMIZATION
hiCaughtControlC
Loading st02/libInit.il ...
Loading st02/loadCxt.ile ... done！
Loading context 'st02' from library 'st02' ... done！
Loading context 'pdkUtils' from library 'st02' ... done！
Loading st02/.cdsenv ... done！
Loading st02/display.drf ...
done！
Loaded st02/libInit.il successfully！

没有人解释一下为什么吗?怎样解决这个错误啊?

提醒下，你看下启动的路径有没有乱码。比如，你新加一个TF工艺文件，你看下选择的时候他的路径是不是有乱码的字符。