How to Enable Relay Mode for MT2523/MT2533
时间:10-02
整理:3721RD
点击:
1. First, make sure bluetooth is power off, if Bluetooth is on, use AT command"AT+EBTAT=bt_power_off".
2. After Bluetooth is off, use AT command "AT+EBTER=xxx" (xxx is UART port number, e.x:for MT2523, the command is "AT+EBTER=2") to enter relay mode.
2. After Bluetooth is off, use AT command "AT+EBTER=xxx" (xxx is UART port number, e.x:for MT2523, the command is "AT+EBTER=2") to enter relay mode.
哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈哈