微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 手机设计讨论 > MTK手机平台交流 > TYBC0A111557KC

TYBC0A111557KC

时间:10-02 整理:3721RD 点击:
重启,不知道什么原因,
[BLDR] Build Time: 20160505-162222
==== Dump RGU Reg ========
RGU MODE:     14
RGU LENGTH:   FFE0
RGU STA:      40000000
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:2
mtk_wdt_mode_config  mode value=10, tmp:22000010
PL RGU RST: ?
SW reset with bypass power key flag
Find bypass powerkey flag
mtk_wdt_mode_config  mode value=51, tmp:22000051
kpd read addr: 0x0502: data:0x4001
Enter mtk_kpd_GPIO_set!
kpd debug column : 107, 108, 0, 0, 0, 0, 0, 0
kpd debug row : 110, 111, 112, 0, 0, 0, 0, 0
after set KP enable: KP_SEL = 0x0 !
mt_usb_calibraion: input_reg = 0x1E0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x3,
mt_usb_phy_calibraion: case_set 3, input_reg = 0x3
mt_usb_phy_calibraion: temp_test = 0x44
mt_usb_phy_calibraion: temp_added = 0x4
mt_usb_phy_calibraion: temp_added = 0x7
mt_usb_phy_calibraion: temp_added = 0x7
mt_usb_phy_calibraion: final temp_test = 0x74
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3958
[RTC] bbpu = 0xD, con = 0x426
[RTC] RTC_CON=0x426
[RTC] RTC_SPAR0=0x0
[RTC] RTC_SPAR0=0x0
[RTC] EOSC_Cali: TOP_CKCON1=0xC0
[RTC] get_frequency_meter: input=0x24CF, ouput=792
[RTC] get_frequency_meter: input=0x24D7, ouput=977
[RTC] get_frequency_meter: input=0x24D3, ouput=884
[RTC] get_frequency_meter: input=0x24D1, ouput=838
[RTC] get_frequency_meter: input=0x24D0, ouput=815
[RTC] get_frequency_meter: input=0x24CF, ouput=792
[RTC] get_frequency_meter: input=0x24D0, ouput=815
[RTC] EOSC cali val = 0x24CF
rtc_2sec_reboot_check cali=1280
rtc_2sec_stat_clear
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0X201, spar0 = 0x0, spar1 = 0x800
[RTC] new_spare0 = 0x6400, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0xD, con = 0x426
SW reset with bypass power key flag
SW reset with bypass power key flag
[PLFM] WDT reboot bypass power key!
[RTC] rtc_bbpu_power_on done
Enter mtk_kpd_gpio_set!
kpd debug column : 107, 108, 0, 0, 0, 0, 0, 0
kpd debug row : 110, 111, 112, 0, 0, 0, 0, 0
***xgl**************************************nand_id_id0=98
***xgl**************************************nand_id_id1=CC
***xgl**************************************nand_id_id2=90
***xgl**************************************nand_id_id3=66
***xgl**************************************nand_id_id4=76
***xgl**************************************nand_id_id5=15
***xgl**************************************nand_id_id6=1
***xgl**************************************nand_id_id7=8
***xgl**************************************nand_id_id8=98
***xgl**************************************nand_id_id9=CC
***xgl**************************************nand_id_id10=90
***xgl**************************************nand_id_id11=66
***xgl**************************************nand_id_id12=76
***xgl**************************************nand_id_id13=15
***xgl**************************************nand_id_id14=1
***xgl**************************************nand_id_id15=8
***xgl**************************************nand_id_id16=0
***xgl**************************************nand_id_id17=0
***xgl**************************************nand_id_id18=0
***xgl**************************************nand_id_id19=0
***xgl**************************************nand_id_id20=0
***xgl**************************************nand_id_id21=0
***xgl**************************************nand_id_id22=0
***xgl***************************emi_settings[i].type=101
***xgl0***************************emi_settings[i].Flash_ID=201E614
***xgl1***************************emi_settings[i].Flash_ID=201E614
[EMI] DDR1
[EMI] FLASH ID=98,CC,90,66,0,0,0,0,0
[EMI] MDL number = 0
[EMI] EMI CLK=200
[EMI] [Train] DQSI=0x40,Window=47
[EMI] [Train] dq_in_dly_strart=0x0, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0x60,Window=47
[EMI] [Train] dq_in_dly_strart=0x0, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0x80,Window=47
[EMI] [Train] dq_in_dly_strart=0x0, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0xA0,Window=47
[EMI] [Train] dq_in_dly_strart=0x0, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] DQSI = 0x70, (0x40, 0xA0)
[EMI] Window = 47
[EMI] R0 cal pass
DQSI= 0x10010A0F
DQSA=0x00650065
DQSB=0x00650065
DQSC=0x00000000
DQSD=0x00000000
DQSU=0x006A006A
DQSV=0x006A006A
DLLV=0x8B8B8B8A
IDLA=0x00000000
IDLI=0x0D0D0D0D
IDLJ=0x00000000
ODLA=0x00000000
CONI=0x00334000
CONJ=0x403E2282
CONK=0x110B0020
CONL=0x00415085
CONN=0x00330557
GEND=0x00010000
DRCT=0x00000001
[EMI] DRVA = 0x66666666
[MEM] complex R/W mem test pass
Recognize NAND: ID [98 CC 90 66 ], Device Name [TYBC0A111557KC], Page Size [4096]B Spare Size [128]B Total Size [512]MB
[NAND]: oobsize: 80
Init BMT table, size: 40
bmt count: 40, system count: 2008
[load_bmt_data]: begin to search BMT fROM block 0x7FF
[load_bmt_data]: bmt_index=0x7FF, start=0x7D8, pool_size=0x28,  
[load_bmt_data]: bmt_index=0x7FF-- Skip bad block: 2047
[load_bmt_data]: bmt_index=0x7FE-- Skip bad block: 2046
[load_bmt_data]: bmt_index=0x7FD-- Match bmt signature @ block: 0x7FD
BMT Checksum is: 0x1
Valid BMT, version v1
bmt found at block: 2045, mapped block: 0
Load bmt data success @ block 0x7FD
BMT v1. total 0 mapping:
[PLFM] Init Boot Device: OK(0)

detecting pmic just reset
[pmic_read_interface] Reg[4a]=0x8000
[pmic_read_interface] val=0x0
[mboot_recovery_load_misc]: size is 12288
[mboot_recovery_load_misc]: misc_addr is 0x800824ec
[mt_part_get_partition] MISC
[mt_part_get_partition] 8400
,}      ==Qu丩oad 'MISC' partition to 0x800824EC (12288 bytes in 0 ms)
eng build
MT65XX_FACTORY_KEY 0x1
MT65XX_BOOT_MENU_KEY 0x0
MT65XX_RECOVERY_KEY 0x0
[pmic_read_interface] Reg[142]=0xc2
[pmic_read_interface] val=0x1
LK pmic powerkey Release
WDT get boot reason is 4 from pre-loader
[is_force_boot] Bypass Kernel Power off charging mode and enter Normal Boot
[pmic_config_interface] Reg[2c]=0x41
[pmic_config_interface] write Reg[2c]=0x1
[kernel_power_off_charging_detection] Turn off HW Led
< Kernel Enter Normal Boot >
[PROFILE] ------- boot mode select takes 59 ms --------
[partition_get_index]find seccfg SECURE index 5
[mt_part_get_partition] SECURE
[mt_part_get_partition] 2c00
[partition_get_index]find sec_ro SECSTATIC index 9
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 8200
[SBC] NS-CHIP
[SBC] Don't check
[PROFILE] ------- sec init takes 13 ms --------
[PROFILE] ------- download boot check takes 0 ms --------
[pmic_config_interface] Reg[758]=0x0
[pmic_config_interface] write Reg[758]=0x10
[pmic_read_interface] Reg[76e]=0x0
[pmic_read_interface] val=0x0
[pmic_config_interface] Reg[76e]=0x0
[pmic_config_interface] write Reg[76e]=0x0
[pmic_read_interface] Reg[76e]=0x0
[pmic_read_interface] val=0x0
[pmic_config_interface] Reg[76e]=0x0
[pmic_config_interface] write Reg[76e]=0x80
[pmic_read_interface] Reg[714]=0x4bcf
[pmic_read_interface] val=0x0
[pmic_read_interface] Reg[714]=0xcc3f
[pmic_read_interface] val=0x1
[pmic_read_interface] Reg[714]=0xcc3f
[pmic_read_interface] val=0x4c3f
[AUXADC] u4channel[7]=19519.
[AUXADC] adc_result_temp=19519, adc_result=4288, r_val_temp=4.
check VBAT=4288 mV with 3450 mV
[pmic_config_interface] Reg[20]=0x1
[pmic_config_interface] write Reg[20]=0x5
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x10
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x110
[pmic_config_interface] Reg[1e]=0x0
[pmic_config_interface] write Reg[1e]=0x1
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x10
[pmic_config_interface] Reg[1e]=0x1
[pmic_config_interface] write Reg[1e]=0x3
[pmic_config_interface] Reg[8]=0xf
[pmic_config_interface] write Reg[8]=0xc
[pmic_config_interface] Reg[0]=0x1
[pmic_config_interface] write Reg[0]=0x9
[pmic_config_interface] Reg[0]=0x1
[pmic_config_interface] write Reg[0]=0x11
[PROFILE] ------- battery init takes 16 ms --------
[PROFILE] ------- rtc check takes 0 ms --------
[wwy] hardware address = 8f800000, fb_offset_logo = 0
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x8f800000, x=0, y=0
             w=480, h=854, pitch=960, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x8f8ca800, x=0, y=0
             w=480, h=854, pitch=960, keyEn=1, key=-16777216, aen=0, alpha=0
[wwy] enter DSI_RegUpdate
[wwy] DSI_RegUpdate dsi_wait_time = 0
[wwy] DSI_RegUpdate dsi_wait_time = 1
[wwy] DSI_RegUpdate dsi_wait_time = 2
[wwy] DSI_RegUpdate dsi_wait_time = 3
[wwy] DSI_RegUpdate dsi_wait_time = 4
[wwy] DSI_RegUpdate dsi_wait_time = 5
[wwy] DSI_RegUpdate dsi_wait_time = 6
[wwy] DSI_RegUpdate dsi_wait_time = 7
[wwy] DSI_RegUpdate dsi_wait_time = 8
[wwy] end DSI_RegUpdate
[PROFILE] ------- show logo takes 25 ms --------
[PROFILE] ------- sw_env takes 0 ms --------
[PROFILE] ------- platform_init takes 722 ms --------
[partition_get_index]find seccfg SECURE index 5
[mt_part_get_partition] SECURE
[mt_part_get_partition] 2c00
[partition_get_index]find sec_ro SECSTATIC index 9
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 8200
[SBC] NS-CHIP
[SBC] Don't check
[SBC] NS-CHIP
[SBC] Don't check
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 3200
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 3200
part page addr is 0x640000
(===========================================================
[LK_BOOT] Android Partition Name                : BOOTIMG
[LK_BOOT] Android Boot IMG Hdr - Magic          : ANDROID
[LK_BOOT] Android Boot IMG Hdr - Kernel Size    : 0x34f6d0
[LK_BOOT] Android Boot IMG Hdr - Rootfs Size    : 0xcae7e
[LK_BOOT] Android Boot IMG Hdr - Page Size      : 0x800
============================================================
> page count of kernel image = 1695
> kernel mem offset = 0x80108000
> rootfs mem offset = 0x80457800
> boot image size = 0x41b800
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 3200
read the data of BOOTIMG (size = 0x41b800)
> from - 0x640800 (skip boot img hdr)
> to   - 0x80107e00 (starts with kernel img hdr)
犼觋觋觋觋觋觋觋觋觋觋觋觋觋觋觋觋觋觋觋阩
[LK_BOOT] KERNEL magic number : 0x58881688
[LK_BOOT] KERNEL name         : KERNEL
[LK_BOOT] KERNEL size         : 0x34f4d0
=========================================
=========================================
[LK_BOOT] ROOTFS magic number : 0x58881688
[LK_BOOT] ROOTFS name         : ROOTFS
[LK_BOOT] ROOTFS size         : 0xcac7e
=========================================
[PROFILE] ------- load boot.img takes 173 ms --------
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x8f800000, x=0, y=0
             w=480, h=854, pitch=960, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x8f8ca800, x=0, y=0
             w=480, h=854, pitch=960, keyEn=1, key=-16777216, aen=0, alpha=0
lcd one 15922
[wwy] mt_disp_adjusting_hardware_addr fb_offset_logo = 3
[LK_ENV]get_env DFO
DFO = NULL
SSSS:0x0
SSSS:0x0
SSSS:0x0
SSSS:0x0
[PROFILE] ------- boot_time takes 1299 ms --------
[LK_ENV]get_env hibboot
[LK_ENV]get_env resume
resume = NULL
booting linux @ 0x80108000, ramdisk @ 0x84100000 (830590)
[LEDS]LK: leds_deinit: LEDS off
[LEDS]LK: red level is 0
[LEDS]LK: green level is 0
[LEDS]LK: blue level is 0
DRAM Rank :1
DRAM Rank[0] Size = 0x10000000
cmdline: console=tty0 console=ttyMT0,921600n1 root=/dev/ram lcm=1-nt35510_dsi_cmd_6572 fps=6280 vram=8388608 bootprof.pl_t=711 bootprof.lk_t=1299 printk.disable_uart=1 boot_reason=4
lk boot time = 1299 ms
lk boot mode = 0
lk finished --> jump to linux kernel
Uncompressing Linux... done, booting the kernel.

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top