72开机挂掉了是什么原因啊

[PWRAP] pwrap_init                                                                        
[PWRAP] _pwrap_init_sistrobe [Read Test], index=0, rdata=0x5AA5                           
[PWRAP] _pwrap_init_sistrobe [Read Test], index=1, rdata=0x5AA5000                        
[PWRAP] _pwrap_init_sistrobe [Read Test], index=2, rdata=0x5AA500000                       
[PWRAP] _pwrap_init_sistrobe [Read Test], index=3, rdata=0x5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test], index=4, rdata=0x5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test], index=5, rdata=0x5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test], index=6, rdata=0x5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test], index=7, rdata=0x5AA5
[PWRAP] _pwrap_init_sistrobe [Read Test], index=8, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=9, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=10, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=11, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=12, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=13, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=14, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=15, rdata=0xB54B
[PWRAP] _pwrap_init_sistrobe [Read Test], index=16, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=17, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=18, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=19, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=20, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=21, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=22, rdata=0x6A97
[PWRAP] _pwrap_init_sistrobe [Read Test], index=23, rdata=0x6A97
[PWRAP] _pwrap_init_reg_clock
[PMIC_WRAP]wrap_init pass,the return value=0.
[platform_vusb_on] PASS
[USBD] USB PRB0 LineState: 0
[PLFM] Keep stay in USB Mode
[PMIC6323_init] Preloader Start..................
[pmic6323_init] PMIC CHIP Code = 8227
pl pmic powerkey Release
[pmic6323_init] powerKey = 0
[pmic6323_init] is USB in = 45060
[pmic6323_init] Done...................
ONEKEY_REBOOT_NORMAL_MODE_PL OK
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA01]
[BLDR] Build Time: 20150626-193950
==== Dump RGU Reg ========
RGU MODE:     14
RGU LENGTH:   FFE0
RGU STA:      40000000
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:2
mtk_wdt_mode_config  mode value=10, tmp:22000010
PL RGU RST: ?
SW reset with bypass power key flag
Find bypass powerkey flag
mtk_wdt_mode_config  mode value=51, tmp:22000051
kpd read addr: 0x0502: data:0x4001
Enter mtk_kpd_GPIO_set！
kpd debug column : 107, 108, 109, 0, 0, 0, 0, 0
kpd debug row : 110, 111, 112, 0, 0, 0, 0, 0
after set KP enable: KP_SEL = 0x0 ！
mt_usb_calibraion: input_reg = 0x1E0
mt_usb_calibraion: term_vref = 0x0,  clkref = 0x0, vrt_vref = 0x3,
mt_usb_phy_calibraion: case_set 3, input_reg = 0x3
mt_usb_phy_calibraion: temp_test = 0x44
mt_usb_phy_calibraion: temp_added = 0x4
mt_usb_phy_calibraion: temp_added = 0x7
mt_usb_phy_calibraion: temp_added = 0x7
mt_usb_phy_calibraion: final temp_test = 0x74
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=3967
[RTC] get_frequency_meter: input=0x0, ouput=5
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] get_frequency_meter: input=0x0, ouput=0
[RTC] bbpu = 0xD, con = 0x426
[RTC] RTC_CON=0x426
[RTC] RTC_SPAR0=0x40
[RTC] RTC_SPAR0=0x40
rtc_2sec_reboot_check cali=1280
rtc_2sec_stat_clear
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0X201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0xD, con = 0x426
SW reset with bypass power key flag
SW reset with bypass power key flag
[PLFM] WDT reboot bypass power key！
[RTC] rtc_bbpu_power_on done
Enter mtk_kpd_gpio_set！
kpd debug column : 107, 108, 109, 0, 0, 0, 0, 0
kpd debug row : 110, 111, 112, 0, 0, 0, 0, 0
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) SRCLK(200000kHz) MODE(0) DDR(0) div(193) DS(0) RS(0)
[SD0] Switch to HS mode
[SD0] SET_CLK(260kHz): SCLK(259kHz) SRCLK(200000kHz) MODE(2) DDR(1) div(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 3728 MB, Max.Speed: 52000 kHz, blklen(512), nblks(7634944), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) SRCLK(200000kHz) MODE(2) DDR(1) div(0) DS(0) RS(0)
[EMI] DDR2
[EMI] FLASH ID=15,1,0,4E,35,55,30,30,4D
[EMI] MDL number = 0
[EMI] EMI CLK=266
[EMI] [Train] DQSI=0x80,Window=35
[EMI] [Train] dq_in_dly_strart=0x2, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0xA0,Window=35
[EMI] [Train] dq_in_dly_strart=0x2, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0xC0,Window=35
[EMI] [Train] dq_in_dly_strart=0x2, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] [Train] DQSI=0xE0,Window=35
[EMI] [Train] dq_in_dly_strart=0x2, byte_setup_start=0x0, byte_dly_start=0x0
[EMI] DQSI = 0xB0, (0x80, 0xE0)
[EMI] Window = 35
[EMI] R0 cal pass
DQSI= 0x1001080F
DQSA=0x00A400A4
DQSB=0x00A400A4
DQSC=0x00000000
DQSD=0x00000000
DQSU=0x00A600A8
DQSV=0x00A600A7
DLLV=0x87888788
IDLA=0x02020202
IDLI=0x09090909
IDLJ=0x00000000
ODLA=0x00000000
CONI=0x02030000
CONJ=0x40503763
CONK=0x23051020
CONL=0x60428098
CONN=0x00450D57
GEND=0x00010000
DRCT=0x00000001
[EMI] DRVA = 0xAAAAAAAA
[MEM] complex R/W mem test pass
[PLFM] Init Boot Device: OK(0)
============func=load_pt_fROM_fixed_addr===scan pmt from 00000000E9320000=====
find pt at 00000000E9320000
find pt
part PRELOADER size 0000000000000000 0000000000600000
part MBR size 0000000000600000 0000000000080000
part EBR1 size 0000000000680000 0000000000080000
part PRO_INFO size 0000000000700000 0000000000300000
part NVRAM size 0000000000A00000 0000000000500000
part PROTECT_F size 0000000000F00000 0000000000A00000
part PROTECT_S size 0000000001900000 0000000000A00000
part SECCFG size 0000000002300000 0000000000020000
part UBOOT size 0000000002320000 0000000000060000
part BOOTIMG size 0000000002380000 0000000000600000
part RECOVERY size 0000000002980000 0000000000600000
part SEC_RO size 0000000002F80000 0000000000040000
part MISC size 0000000002FC0000 0000000000080000
part LOGO size 0000000003040000 0000000000300000
part EXPDB size 0000000003340000 0000000000A00000
part android size 0000000003D40000 0000000032000000
part CACHE size 0000000035D40000 000000000E200000
part USRDATA size 0000000043F40000 0000000052C00000
part FAT size 0000000096B40000 00000000513E0000
[PART] blksz: 512B
[PART] [0x0000000000000000-0x00000000005FFFFF] "PRELOADER" (12288 blocks)
[PART] [0x0000000000600000-0x000000000067FFFF] "MBR" (1024 blocks)
[PART] [0x0000000000680000-0x00000000006FFFFF] "EBR1" (1024 blocks)
[PART] [0x0000000000700000-0x00000000009FFFFF] "PRO_INFO" (6144 blocks)
[PART] [0x0000000000A00000-0x0000000000EFFFFF] "NVRAM" (10240 blocks)
[PART] [0x0000000000F00000-0x00000000018FFFFF] "PROTECT_F" (20480 blocks)
[PART] [0x0000000001900000-0x00000000022FFFFF] "PROTECT_S" (20480 blocks)
[PART] [0x0000000002300000-0x000000000231FFFF] "SECURE" (256 blocks)
[PART] [0x0000000002320000-0x000000000237FFFF] "UBOOT" (768 blocks)
[PART] [0x0000000002380000-0x000000000297FFFF] "BOOTIMG" (12288 blocks)
[PART] [0x0000000002980000-0x0000000002F7FFFF] "RECOVERY" (12288 blocks)
[PART] [0x0000000002F80000-0x0000000002FBFFFF] "SECSTATIC" (512 blocks)
[PART] [0x0000000002FC0000-0x000000000303FFFF] "MISC" (1024 blocks)
[PART] [0x0000000003040000-0x000000000333FFFF] "LOGO" (6144 blocks)
[PART] [0x0000000003340000-0x0000000003D3FFFF] "EXPDB" (20480 blocks)
[PART] [0x0000000003D40000-0x0000000035D3FFFF] "ANDSYSIMG" (1638400 blocks)
[PART] [0x0000000035D40000-0x0000000043F3FFFF] "CACHE" (462848 blocks)
[PART] [0x0000000043F40000-0x0000000096B3FFFF] "USER" (2711552 blocks)
[PART] [0x0000000096B40000-0x0000000096B3FFFF] "FAT" (0 blocks)
[ROM_INFO] 'v2','0x2300000','0x20000','0x2F80000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Not Found '0x6000'
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
[SEC] read '0x2300000'
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
[LIB] SeCLIb.a '20130313-191916'
[LIB] CFG read size '0x4000' '0x1860'
[LIB] Name =
[LIB] Config = 0x22, 0x22
0x31,0x41,0x35,0x35
[platform_vusb_on] PASS
[TOOL] <UART> wait sync time 150ms->105ms
[TOOL] <UART> receieved data: ()
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 267728
[PART] magic: 58881688h
[PART] load "UBOOT" from 0x0000000002320200 (dev) to 0x80020000 (mem) [SUCCESS]
[PART] load speed: 10893KB/s, 267728 bytes, 24ms
[SECRO] Don't read
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] NS-CHIP
[LIB] Don't check
Device APC domain init setup:
[PLFM] ram_console->start=0x1A8D
[PLFM] ram_console(0x2)=0x2 (boot reason)锟?a href="http://bbs.16rd.com/forum-315-1.html" target="_blank" class="relatedlink">ARM clock set finished
[PROFILE] ------- set clock takes 0 ms --------
[PROFILE] -------misc init takes 0 ms -------- fault() done
[PROFILE] ------- I2C init takes 0 ms --------
[PROFILE] ------- clock init takes 0 ms --------
mtk_wdt_mode LK config  mode value=51
mtk_wdt_mode_config LK  mode value=10, tmp:22000010
UB wdt init
mtk_wdt_mode LK config  mode value=10
mtk_wdt_mode_config LK  mode value=59, tmp:22000059
[PROFILE] ------- wdt init takes 4 ms --------
[LCM Auto Detect], we have 1 lcm drivers built in
[LCM Auto Detect], try to find driver for [unknown]
[LCM Specified] [mtk_MT6572m_hx8369_rgb_6572]
[mtkfb] LCM TYPE: DPI
[mtkfb] LCM INTERFACE: NONE
[mtkfb] LCM resolution: 1024 x 600
[PROFILE] -------disp preinit takes 2 ms --------
[LEDS]LK: leds_init: mt65xx_backlight_off
[LEDS]LK: mt65xx_backlight_off
[LEDS]LK: LCD-backlight level is 0
[LEDS]LK: PMIC Type: 2, Level: 0
[pmic_config_interface] Reg[108]=0x3ff
[pmic_config_interface] write Reg[108]=0x3bf
[pmic_config_interface] Reg[102]=0x803
[pmic_config_interface] write Reg[102]=0x3
[pmic_config_interface] Reg[10e]=0xf
[pmic_config_interface] write Reg[10e]=0xe
[pmic_config_interface] Reg[126]=0xc0
[pmic_config_interface] write Reg[126]=0x4c0
[pmic_config_interface] Reg[330]=0x0
[pmic_config_interface] write Reg[330]=0x0
[pmic_config_interface] Reg[334]=0x0
[pmic_config_interface] write Reg[334]=0x5000
[pmic_config_interface] Reg[334]=0x5000
[pmic_config_interface] write Reg[334]=0x5000
[pmic_config_interface] Reg[350]=0x0
[pmic_config_interface] write Reg[350]=0x800
[pmic_config_interface] Reg[354]=0x0
[pmic_config_interface] write Reg[354]=0x0
[pmic_config_interface] Reg[354]=0x0
[pmic_config_interface] write Reg[354]=0x1
[pmic_config_interface] Reg[356]=0x0
[pmic_config_interface] write Reg[356]=0x10
[pmic_config_interface] Reg[10e]=0xe
[pmic_config_interface] write Reg[10e]=0xc
[pmic_config_interface] Reg[126]=0x4c0
[pmic_config_interface] write Reg[126]=0xcc0
[pmic_config_interface] Reg[338]=0x0
[pmic_config_interface] write Reg[338]=0x0
[pmic_config_interface] Reg[33c]=0x0
[pmic_config_interface] write Reg[33c]=0x5000
[pmic_config_interface] Reg[33c]=0x5000
[pmic_config_interface] write Reg[33c]=0x5000
[pmic_config_interface] Reg[350]=0x800
[pmic_config_interface] write Reg[350]=0xc00
[pmic_config_interface] Reg[354]=0x1
[pmic_config_interface] write Reg[354]=0x3
[pmic_config_interface] Reg[356]=0x10
[pmic_config_interface] write Reg[356]=0X30
[pmic_config_interface] Reg[10e]=0xc
[pmic_config_interface] write Reg[10e]=0x8
[pmic_config_interface] Reg[126]=0xcc0
[pmic_config_interface] write Reg[126]=0x1cc0
[pmic_config_interface] Reg[340]=0x0
[pmic_config_interface] write Reg[340]=0x0
[pmic_config_interface] Reg[344]=0x0
[pmic_config_interface] write Reg[344]=0x5000
[pmic_config_interface] Reg[344]=0x5000
[pmic_config_interface] write Reg[344]=0x5000
[pmic_config_interface] Reg[350]=0xc00
[pmic_config_interface] write Reg[350]=0xe00
[pmic_config_interface] Reg[354]=0x3
[pmic_config_interface] write Reg[354]=0x7
[pmic_config_interface] Reg[356]=0x30
[pmic_config_interface] write Reg[356]=0x70
[pmic_config_interface] Reg[10e]=0x8
[pmic_config_interface] write Reg[10e]=0x0
[pmic_config_interface] Reg[126]=0x1cc0
[pmic_config_interface] write Reg[126]=0x3cc0
[pmic_config_interface] Reg[348]=0x0
[pmic_config_interface] write Reg[348]=0x0
[pmic_config_interface] Reg[34c]=0x0
[pmic_config_interface] write Reg[34c]=0x5000
[pmic_config_interface] Reg[34c]=0x5000
[pmic_config_interface] write Reg[34c]=0x5000
[pmic_config_interface] Reg[350]=0xe00
[pmic_config_interface] write Reg[350]=0xf00
[pmic_config_interface] Reg[354]=0x7
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[356]=0x70
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[PROFILE] ------- led init takes 38 ms --------
DISP/disp common log enabled
DISP/lcd log enabled
DISP/[DISP] - disp_path_ddp_clock_on 0. 0xffdf7e00
[DISP] PLL config:data_rate=832,txdiv=1,delta=4,ssc_delta=0x60d
DISP/DPI_Set_DrivingCurrent not implement for 6575dpi_init, 219
[pmic_config_interface] Reg[50a]=0x0
[pmic_config_interface] write Reg[50a]=0x8000
[pmic_config_interface] Reg[530]=0xa1
[pmic_config_interface] write Reg[530]=0xa1
[DISP] - DPI_PowerOn. 0xfffffff3
dpi_init, 229
dpi_init, 236
DISP/[DDP]disp_path_config(), srcModule=2, addr=0x0, inFormat=0,
             pitch=2048, bgROI(0,0,1024,600), bgColor=0, outFormat=0, dstModule=13, dstAddr=0x0,  
DISP/DISI_MODULE_DPI0
[DDP] disp_bls_init : srcWidth = 1024, srcHeight = 600
RDMA: w=1024, h=600, pitch=3072, mode=0
[DDP] disp_bls_init : srcWidth = 1024, srcHeight = 600
dpi_init, 288
[PROFILE] ------- disp init takes 120 ms --------
[PROFILE] ------- pmic6329_init takes 0 ms --------
[PROFILE] ------- platform_early_init takes 170 ms --------
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) SRCLK(200000kHz) MODE(0) DDR(0) div(193) DS(0) RS(0)
[SD0] Switch to HS mode
[SD0] SET_CLK(260kHz): SCLK(259kHz) SRCLK(200000kHz) MODE(2) DDR(1) div(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 3728 MB, Max.Speed: 52000 kHz, blklen(512), nblks(7634944), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) SRCLK(200000kHz) MODE(2) DDR(1) div(0) DS(0) RS(0)
[mt_part_register_device]
[mt_part_register_device]malloc 1024 : 800827b8
MT6577_part_init_pmt
============func=load_pt_from_fixed_addr===scan pmt from e9320000=====
find pt at e9320000
Find pt
partition PRELOADER size 0000000000000000 0000000000600000
partition MBR size 0000000000600000 0000000000080000
partition EBR1 size 0000000000680000 0000000000080000
partition PRO_INFO size 0000000000700000 0000000000300000
partition NVRAM size 0000000000a00000 0000000000500000
partition PROTECT_F size 0000000000f00000 0000000000a00000
partition PROTECT_S size 0000000001900000 0000000000a00000
partition SECCFG size 0000000002300000 0000000000020000
partition UBOOT size 0000000002320000 0000000000060000
partition BOOTIMG size 0000000002380000 0000000000600000
partition RECOVERY size 0000000002980000 0000000000600000
partition SEC_RO size 0000000002f80000 0000000000040000
partition MISC size 0000000002fc0000 0000000000080000
partition LOGO size 0000000003040000 0000000000300000
partition EXPDB size 0000000003340000 0000000000a00000
partition ANDROID size 0000000003d40000 0000000032000000
partition CACHE size 0000000035d40000 000000000e200000
partition USRDATA size 0000000043f40000 0000000052c00000
partition FAT size 0000000096b40000 00000000513e0000
[SD0] boot device found
[PROFILE] ------- NAND/EMMC init takes 83 ms --------
[mt_part_get_partition] MISC
[mt_part_get_partition] 17e00
[LK_ENV]ENV initialize sucess
[LK_ENV]env:
data_free_size_th=52428800
[PROFILE] ------- ENV init takes 2 ms --------
[mt_part_get_partition] LOGO
[mt_part_get_partition] 18200
[mt_part_get_partition] LOGO
[mt_part_get_partition] 18200
=========================================
[LK_BOOT] LOGO magic number : 0x58881688
[LK_BOOT] LOGO name         : LOGO
[LK_BOOT] LOGO size         : 395648
=========================================
read the data of LOGO
DISP/[DISP] - disp_path_ddp_clock_on 0. 0xffdf7e00
DISP/panel is enabled
[pmic_config_interface] Reg[50a]=0x8000
[pmic_config_interface] write Reg[50a]=0x8000
[pmic_config_interface] Reg[530]=0xa1
[pmic_config_interface] write Reg[530]=0xa1
[pmic_config_interface] Reg[50a]=0x8000
[pmic_config_interface] write Reg[50a]=0x8000
[pmic_config_interface] Reg[530]=0xa1
[pmic_config_interface] write Reg[530]=0xa1
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f200000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f200000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
[wwy] hardware address = 9f590000, fb_offset_logo = 3
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f590000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
[wwy] enter DSI_RegUpdate
[wwy] DSI_RegUpdate dsi_wait_time = 0
[wwy] DSI_RegUpdate dsi_wait_time = 1
[wwy] DSI_RegUpdate dsi_wait_time = 2
[wwy] end DSI_RegUpdate
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f590000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
[PROFILE] ------- load_logo takes 251 ms --------
kpd read addr: 0x0502: data:0x4000
[LEDS]LK: mt65xx_backlight_on
[LEDS]LK: lcd-backlight level is 255
[LEDS]LK: PMIC Type: 2, Level: 255
[pmic_config_interface] Reg[108]=0x3bf
[pmic_config_interface] write Reg[108]=0x3bf
[pmic_config_interface] Reg[102]=0x3
[pmic_config_interface] write Reg[102]=0x3
[pmic_config_interface] Reg[10e]=0x0
[pmic_config_interface] write Reg[10e]=0x0
[pmic_config_interface] Reg[126]=0x3cc0
[pmic_config_interface] write Reg[126]=0x3cc0
[pmic_config_interface] Reg[330]=0x0
[pmic_config_interface] write Reg[330]=0x0
[pmic_config_interface] Reg[334]=0x5000
[pmic_config_interface] write Reg[334]=0x5000
[pmic_config_interface] Reg[334]=0x5000
[pmic_config_interface] write Reg[334]=0x5000
[pmic_config_interface] Reg[350]=0xf00
[pmic_config_interface] write Reg[350]=0xf00
[pmic_config_interface] Reg[354]=0xf
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[354]=0xf
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[10e]=0x0
[pmic_config_interface] write Reg[10e]=0x0
[pmic_config_interface] Reg[126]=0x3cc0
[pmic_config_interface] write Reg[126]=0x3cc0
[pmic_config_interface] Reg[338]=0x0
[pmic_config_interface] write Reg[338]=0x0
[pmic_config_interface] Reg[33c]=0x5000
[pmic_config_interface] write Reg[33c]=0x5000
[pmic_config_interface] Reg[33c]=0x5000
[pmic_config_interface] write Reg[33c]=0x5000
[pmic_config_interface] Reg[350]=0xf00
[pmic_config_interface] write Reg[350]=0xf00
[pmic_config_interface] Reg[354]=0xf
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[10e]=0x0
[pmic_config_interface] write Reg[10e]=0x0
[pmic_config_interface] Reg[126]=0x3cc0
[pmic_config_interface] write Reg[126]=0x3cc0
[pmic_config_interface] Reg[340]=0x0
[pmic_config_interface] write Reg[340]=0x0
[pmic_config_interface] Reg[344]=0x5000
[pmic_config_interface] write Reg[344]=0x5000
[pmic_config_interface] Reg[344]=0x5000
[pmic_config_interface] write Reg[344]=0x5000
[pmic_config_interface] Reg[350]=0xf00
[pmic_config_interface] write Reg[350]=0xf00
[pmic_config_interface] Reg[354]=0xf
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[pmic_config_interface] Reg[10e]=0x0
[pmic_config_interface] write Reg[10e]=0x0
[pmic_config_interface] Reg[126]=0x3cc0
[pmic_config_interface] write Reg[126]=0x3cc0
[pmic_config_interface] Reg[348]=0x0
[pmic_config_interface] write Reg[348]=0x0
[pmic_config_interface] Reg[34c]=0x5000
[pmic_config_interface] write Reg[34c]=0x5000
[pmic_config_interface] Reg[34c]=0x5000
[pmic_config_interface] write Reg[34c]=0x5000
[pmic_config_interface] Reg[350]=0xf00
[pmic_config_interface] write Reg[350]=0xf00
[pmic_config_interface] Reg[354]=0xf
[pmic_config_interface] write Reg[354]=0xf
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf0
[LEDS]LK: Level Mapping = 80
[LEDS]LK: ISINK DIM Duty = 31
[LEDS]LK: ISINK Current = 5
[pmic_config_interface] Reg[330]=0x0
[pmic_config_interface] write Reg[330]=0x1f00
[pmic_config_interface] Reg[338]=0x0
[pmic_config_interface] write Reg[338]=0x1f00
[pmic_config_interface] Reg[340]=0x0
[pmic_config_interface] write Reg[340]=0x1f00
[pmic_config_interface] Reg[348]=0x0
[pmic_config_interface] write Reg[348]=0x1f00
[pmic_config_interface] Reg[334]=0x5000
[pmic_config_interface] write Reg[334]=0x5000
[pmic_config_interface] Reg[33c]=0x5000
[pmic_config_interface] write Reg[33c]=0x5000
[pmic_config_interface] Reg[344]=0x5000
[pmic_config_interface] write Reg[344]=0x5000
[pmic_config_interface] Reg[34c]=0x5000
[pmic_config_interface] write Reg[34c]=0x5000
[pmic_config_interface] Reg[332]=0x0
[pmic_config_interface] write Reg[332]=0x2
[pmic_config_interface] Reg[33a]=0x0
[pmic_config_interface] write Reg[33a]=0x2
[pmic_config_interface] Reg[342]=0x0
[pmic_config_interface] write Reg[342]=0x2
[pmic_config_interface] Reg[34a]=0x0
[pmic_config_interface] write Reg[34a]=0x2
[pmic_config_interface] Reg[356]=0xf0
[pmic_config_interface] write Reg[356]=0xf1
[pmic_config_interface] Reg[356]=0xf1
[pmic_config_interface] write Reg[356]=0xf3
[pmic_config_interface] Reg[356]=0xf3
[pmic_config_interface] write Reg[356]=0xf7
[pmic_config_interface] Reg[356]=0xf7
[pmic_config_interface] write Reg[356]=0xff
[PROFILE] ------- backlight takes 50 ms --------
[2320] D:Search boot record at 0x81f00000
[2320] D:No boot record found 3f-3f
detecting pmic just reset
[pmic_read_interface] Reg[4a]=0x8000
[pmic_read_interface] val=0x0
[mboot_recovery_load_misc]: size is 6144
[mboot_recovery_load_misc]: misc_addr is 0x80086bd0
[mt_part_get_partition] MISC
[mt_part_get_partition] 17e00
[LK_BOOT] Load 'MISC' partition to 0x80086BD0 (6144 bytes in 0 ms)
eng build
MT65XX_FACTORY_KEY 0x1
MT65XX_BOOT_MENU_KEY 0x0
MT65XX_RECOVERY_KEY 0x0
[pmic_read_interface] Reg[142]=0x42
[pmic_read_interface] val=0x1
LK pmic powerkey Release
WDT get boot reason is 4 from pre-loader
[is_force_boot] Bypass Kernel Power off charging mode and enter Normal Boot
[pmic_config_interface] Reg[2c]=0x44
[pmic_config_interface] write Reg[2c]=0x4
[kernel_power_off_charging_detection] Turn off HW Led
< Kernel Enter Normal Boot >
[PROFILE] ------- boot mode select takes 60 ms --------
[partition_get_index]find seccfg SECURE index 7
[mt_part_get_partition] SECURE
[mt_part_get_partition] 11800
[partition_get_index]find sec_ro SECSTATIC index 11
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 17c00
[SBC] NS-CHIP
[SBC] Don't check
[PROFILE] ------- sec init takes 4 ms --------
[PROFILE] ------- download boot check takes 0 ms --------
[pmic_config_interface] Reg[758]=0x0
[pmic_config_interface] write Reg[758]=0x10
[pmic_read_interface] Reg[76e]=0x0
[pmic_read_interface] val=0x0
[pmic_config_interface] Reg[76e]=0x0
[pmic_config_interface] write Reg[76e]=0x0
[pmic_read_interface] Reg[76e]=0x0
[pmic_read_interface] val=0x0
[pmic_config_interface] Reg[76e]=0x0
[pmic_config_interface] write Reg[76e]=0x80
[pmic_read_interface] Reg[714]=0x44a6
[pmic_read_interface] val=0x0
[pmic_read_interface] Reg[714]=0xc4a7
[pmic_read_interface] val=0x1
[pmic_read_interface] Reg[714]=0xc4a7
[pmic_read_interface] val=0x44a7
[AUXADC] u4channel[7]=17575.
[AUXADC] adc_result_temp=17575, adc_result=3861, r_val_temp=4.
check VBAT=3861 mV with 3450 mV
[pmic_config_interface] Reg[20]=0x1
[pmic_config_interface] write Reg[20]=0x5
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x10
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x110
[pmic_config_interface] Reg[1e]=0x0
[pmic_config_interface] write Reg[1e]=0x1
[pmic_config_interface] Reg[1a]=0x10
[pmic_config_interface] write Reg[1a]=0x10
[pmic_config_interface] Reg[1e]=0x1
[pmic_config_interface] write Reg[1e]=0x3
[pmic_config_interface] Reg[8]=0xf
[pmic_config_interface] write Reg[8]=0xc
[pmic_config_interface] Reg[0]=0x1
[pmic_config_interface] write Reg[0]=0x9
[pmic_config_interface] Reg[0]=0x1
[pmic_config_interface] write Reg[0]=0x11
[PROFILE] ------- Battery init takes 16 ms --------
[PROFILE] ------- rtc check takes 0 ms --------
[wwy] hardware address = 9f200000, fb_offset_logo = 0
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f200000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
[wwy] enter DSI_RegUpdate
[wwy] DSI_RegUpdate dsi_wait_time = 0
[wwy] DSI_RegUpdate dsi_wait_time = 1
[wwy] DSI_RegUpdate dsi_wait_time = 2
[wwy] DSI_RegUpdate dsi_wait_time = 3
[wwy] DSI_RegUpdate dsi_wait_time = 4
[wwy] DSI_RegUpdate dsi_wait_time = 5
[wwy] DSI_RegUpdate dsi_wait_time = 6
[wwy] DSI_RegUpdate dsi_wait_time = 7
[wwy] DSI_RegUpdate dsi_wait_time = 8
[wwy] DSI_RegUpdate dsi_wait_time = 9
[wwy] DSI_RegUpdate dsi_wait_time = 10
[wwy] DSI_RegUpdate dsi_wait_time = 11
[wwy] DSI_RegUpdate dsi_wait_time = 12
[wwy] DSI_RegUpdate dsi_wait_time = 13
[wwy] DSI_RegUpdate dsi_wait_time = 14
[wwy] DSI_RegUpdate dsi_wait_time = 15
[wwy] end DSI_RegUpdate
[PROFILE] ------- show logo takes 44 ms --------
[LK_ENV]get_env hibboot
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f200000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
[PROFILE] ------- sw_env takes 14 ms --------
[PROFILE] ------- platform_init takes 529 ms --------
[partition_get_index]find seccfg SECURE index 7
[mt_part_get_partition] SECURE
[mt_part_get_partition] 11800
[partition_get_index]find sec_ro SECSTATIC index 11
[mt_part_get_partition] SECSTATIC
[mt_part_get_partition] 17c00
[SBC] NS-CHIP
[SBC] Don't check
[SBC] NS-CHIP
[SBC] Don't check
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 11c00
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 11c00
part page addr is 0xd
============================================================
[LK_BOOT] Android Partition Name                : BOOTIMG
[LK_BOOT] Android Boot IMG Hdr - Magic          : ANDROID
[LK_BOOT] Android Boot IMG Hdr - Kernel Size    : 0x388e48
[LK_BOOT] Android Boot IMG Hdr - rootfs Size    : 0xe14df
[LK_BOOT] Android Boot IMG Hdr - Page Size      : 0x800
============================================================
> page count of kernel image = 1810
> kernel mem offset = 0x80108000
> rootfs mem offset = 0x80491000
> boot image size = 0x46b800
[mt_part_get_partition] BOOTIMG
[mt_part_get_partition] 11c00
read the data of BOOTIMG (size = 0x46b800)
> from - 0x0000000002380800 (skip boot img hdr)
> to   - 0x80107e00 (starts with kernel img hdr)
=========================================
[LK_BOOT] KERNEL magic number : 0x58881688
[LK_BOOT] KERNEL name         : KERNEL
[LK_BOOT] KERNEL size         : 0x388c48
=========================================
=========================================
[LK_BOOT] ROOTFS magic number : 0x58881688
[LK_BOOT] ROOTFS name         : ROOTFS
[LK_BOOT] ROOTFS size         : 0xe12df
=========================================
[PROFILE] ------- load boot.img takes 74 ms --------
DISP/[Func]LCD_ConfigOVL
DISP/[DDP]disp_path_config_layer(), layer=2, source=0, fmt=1, addr=0x9f200000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=0, key=0, aen=0, alpha=0
DISP/[DDP]disp_path_config_layer(), layer=3, source=0, fmt=1, addr=0x9f330000, x=0, y=0
             w=1024, h=600, pitch=2048, keyEn=1, key=-16777216, aen=0, alpha=0
lcd one 16936
[wwy] mt_disp_adjusting_hardware_addr fb_offset_logo = 3
[LK_ENV]get_env DFO
DFO = NULL
SSSS:0x0
SSSS:0x0
SSSS:0x0
SSSS:0x0
[PROFILE] ------- boot_time takes 814 ms --------
[LK_ENV]get_env hibboot
[LK_ENV]get_env resume
resume = NULL
booting linux @ 0x80108000, ramdisk @ 0x84100000 (922335)
[LEDS]LK: leds_deinit: LEDS off
[LEDS]LK: red level is 0
[LEDS]LK: green level is 0
[LEDS]LK: blue level is 0
DRAM Rank :1
DRAM Rank[0] Size = 0x20000000
cmdline: console=tty0 console=ttyMT0,921600n1 root=/dev/ram lcm=1-mtk_mt6572m_hx8369_rgb_6572 fps=5904 vram=14680064 bootprof.pl_t=663 bootprof.lk_t=4
lk boot time = 814 ms
lk boot mode = 0
lk finished --> jump to linux kernel
Uncompressing Linux... done, booting the kernel.
[    0.000000]-(0)[0:swapper]Linux version 3.4.67 (root@tc4) (gcc version 4.7 (GCC) ) #21 SMP PREEMPT Fri Jun 26 19:40:51 CST 2015
[    0.000000]-(0)[0:swapper]CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000]-(0)[0:swapper]CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000]-(0)[0:swapper]Machine: MT6572
[    0.000000]-(0)[0:swapper]Load default dfo data...
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MTK_MD1_SUPPORT:0x00000003
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MTK_MD2_SUPPORT:0x00000004
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MD1_SMEM_SIZE:0x00200000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MD2_SMEM_SIZE:0x00200000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MTK_ENABLE_MD1:0x00000001
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MTK_ENABLE_MD2:0x00000000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MD1_SIZE:0x01200000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)DFO:MD2_SIZE:0x00000000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)Get DFO:MTK_ENABLE_MD1:0x00000001
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)Get DFO:MD1_SIZE:0x01200000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)Get DFO:MD1_SMEM_SIZE:0x00200000
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)Get DFO:MTK_MD1_SUPPORT:0x00000003
[    0.000000]-(0)[0:swapper]tag_devinfo_data_rid, indx[12]:0xe50b2b6b
[    0.000000]-(0)[0:swapper]tag_devinfo_data size:26
[    0.000000]-(0)[0:swapper][mtkfb] LCM is connected
[    0.000000]-(0)[0:swapper]DISP_SelectDeviceBoot
[    0.000000]-(0)[0:swapper][LCM Auto Detect], we have 1 lcm drivers built in
[    0.000000]-(0)[0:swapper][LCM Auto Detect], try to find driver for [mtk_mt6572m_hx8369_rgb_6572]
[    0.000000]-(0)[0:swapper][LCM Specified]    [mtk_mt6572m_hx8369_rgb_6572]
[    0.000000]-(0)[0:swapper][mtkfb] LCM TYPE: DPI
[    0.000000]-(0)[0:swapper][mtkfb] LCM INTERFACE: NONE
[    0.000000]-(0)[0:swapper][mtkfb] LCM resolution: 1024 x 600
[    0.000000]-(0)[0:swapper]DISP_GetVRamSizeBoot: 14680064 bytes[14MB]
[    0.000000]-(0)[0:swapper][PHY Layout]avaiable DRAM size (lk) = 0x1ff00000
[    0.000000]-(0)[0:swapper][PHY layout]avaiable DRAM size = 0x1ff00000
[    0.000000]-(0)[0:swapper][PHY layout]FB       :   0x9f200000 - 0x9fffffff  (0xe00000)
[    0.000000]-(0)[0:swapper][PHY layout]CONNSYS  :   0x80000000 - 0x800fffff  (0x100000)
[    0.000000]-(0)[0:swapper][Phy Layout]  mtk_get_max_DRAM_size() : 0x20000000
[    0.000000]-(0)[0:swapper][Phy Layout]    get_phys_offset() : 0x80100000
[    0.000000]-(0)[0:swapper][Phy Layout]  get_max_phys_addr() : 0xa0000000
[    0.000000]-(0)[0:swapper]Ignoring unrecognised tag 0x41000802
[    0.000000]-(0)[0:swapper]Ignoring unrecognised tag 0x41000804
[    0.000000]-(0)[0:swapper]Ignoring unrecognised tag 0x54410008
[    0.000000]-(0)[0:swapper]Ignoring unrecognised tag 0x41000806
[    0.000000]-(0)[0:swapper]weak reserve function: mtk_wcn_consys_memory_reserve
[    0.000000]-(0)[0:swapper][PHY layout]ccci_md_mem_reserve   :   0x9c000000 - 0x9d3fffff (0x01400000)
[    0.000000]-(0)[0:swapper][ccci/ctl] (0)md mem reserve successfully,ptr=9c000000,size=20971520
[    0.000000]-(0)[0:swapper]Memory policy: ECC disabled, Data cache writealloc
[    0.000000]-(0)[0:swapper][PHY layout]kernel   :   0x80100000 - 0x9bffffff (0x1bf00000)
[    0.000000]-(0)[0:swapper]creating mapping start pa: 0x80100000 @ 0xc0000000 , end pa: 0x9c000000 @ 0xdbf00000
[    0.000000]-(0)[0:swapper][PHY layout]kernel   :   0x9d400000 - 0x9f1fffff (0x01e00000)
[    0.000000]-(0)[0:swapper]creating mapping start pa: 0x9d400000 @ 0xdd300000 , end pa: 0x9f200000 @ 0xdf100000
[    0.000000]-(0)[0:swapper][CORE] num:4
[    0.000000]-(0)[0:swapper]L2CTLR core count (4) > NR_CPUS (2)
[    0.000000]-(0)[0:swapper]set nr_cores to NR_CPUS (2)
[    0.000000]-(0)[0:swapper]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121118
[    0.000000]-(0)[0:swapper][cpu_ntf] <00>c01231ac (page_alloc_cpu_notify)
[    0.000000]-(0)[0:swapper]Kernel command line: console=tty0 console=ttyMT0,921600n1 root=/dev/ram vmalloc=500M slub_max_order=0 slub_debug=O  lcm=4
[    0.000000]-(0)[0:swapper]Memory: 467360k/467360k available, 41568k reserved, 0K highmem
[    0.000000]-(0)[0:swapper]Virtual kernel memory layout:
[    0.000000]-(0)[0:swapper]    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]-(0)[0:swapper]    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]-(0)[0:swapper]    vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]-(0)[0:swapper]    lowmem  : 0xc0000000 - 0xdf100000   ( 497 MB)
[    0.000000]-(0)[0:swapper]    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]-(0)[0:swapper]    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]-(0)[0:swapper]      .text : 0xc0008000 - 0xc0a46000   (10488 kB)
[    0.000000]-(0)[0:swapper]      .init : 0xc0a46000 - 0xc0aa02c0   ( 361 kB)
[    0.000000]-(0)[0:swapper]      .data : 0xc0aa2000 - 0xc0b31d5c   ( 576 kB)
[    0.000000]-(0)[0:swapper]       .bss : 0xc0b31d80 - 0xc0f4cb70   (4204 kB)
[    0.000000]-(0)[0:swapper][cpu_ntf] <01>c0785bd4 (slab_cpuup_callback)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <02>c0785208 (sched_ilb_notifier)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <03>c0785a28 (perf_cpu_notify)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <04>c0785798 (rcu_cpu_notify)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <05>c02cfbf4 (radix_tree_callback)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <06>c078431c (timer_cpu_notify)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <07>c0784cf4 (hrtimer_cpu_notify)
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <08>c078424c (remote_softirq_cpu_notify)
[    0.000000]-(0)[0:swapper/0]GPT1_CMP = 130000, HZ = 100
[    0.000000]-(0)[0:swapper/0][cpu_ntf] <09>c00c3284 (hotplug_cfd)
[    0.000000].(0)[0:swapper/0][UART] mtk console setup : co->index 0 options:921600n1
[    0.000000]-(0)[0:swapper/0]No Flow Control
[    0.000000].(0)[0:swapper/0][UART] mtk console setup : uart_set_option port(0) baud(921600) parity(n) bits(1) flow(n) - ret(0)
[    0.000000].(0)[0:swapper/0][UART] mtk setting: (0, 0, 0, 0, 128)
[    0.000000].(0)[0:swapper/0]ram_console_early_init: start: 0xf2000000, size: 7168
[    0.000000].(0)[0:swapper/0]ram_console: found existing buffer, size 7040, start 6797
[    0.129580].(0)[0:swapper/0][cpu_ntf] <10>c0190ed8 (buffer_cpu_notify)
[    0.131054].(0)[0:swapper/0][cpu_ntf] <11>c0161668 (files_lglock_lg_cpu_callback)
[    0.132060].(0)[0:swapper/0][cpu_ntf] <12>c017db1c (vfsmount_lock_lg_cpu_callback)
[    0.134278].(0)[0:swapper/0][cpu_ntf] <13>c0785a74 (ratelimit_handler)
[    0.190301].(0)[1:swapper/0]Calibrating local timer... 13.02MHz.
[    0.250071].(0)[1:swapper/0][cpu_ntf] <14>c0783474 (pmu_cpu_notify)
[    0.270159].(0)[1:swapper/0][cpu_ntf] <15>c0783f58 (cpu_callback)
[    0.270927].(0)[1:swapper/0][cpu_ntf] <16>c07825dc (workqueue_cpu_up_callback)
[    0.271830].(0)[1:swapper/0][cpu_ntf] <17>c078264c (workqueue_cpu_down_callback)
[    0.273500].(0)[1:swapper/0][cpu_ntf] <18>c0784e1c (migration_call)
[    0.274287].(0)[1:swapper/0][cpu_ntf] <19>c0784d90 (sched_cpu_active)
[    0.275091].(0)[1:swapper/0][cpu_ntf] <20>c0784dcc (sched_cpu_inactive)
[    0.276126].(0)[1:swapper/0][cpu_ntf] <21>c07854b4 (cpu_stop_cpu_callback)
[    0.277044].(0)[1:swapper/0][cpu_ntf] <22>c00fa374 (rb_cpu_notify)
[    0.310473].(0)[1:swapper/0]Boot slave CPU
[    0.310982].(0)[1:swapper/0][Power/hotplug] boot_secondary, cpu: 1
[    0.311751].(0)[1:swapper/0][Power/hotplug] SLAVE1_MAGIC_NUM:534c4131
[    0.370761].(0)[1:swapper/0][Sched] build_sched_domains
[    0.371775].(0)[1:swapper/0][cpu_ntf] <23>c0080024 (cpuset_cpu_active)
[    0.372592].(0)[1:swapper/0][cpu_ntf] <24>c00800e4 (cpuset_cpu_inactive)
[    0.373430].(0)[1:swapper/0][cpu_ntf] <25>c00895a0 (update_runtime)
[    0.391524].(1)[1:swapper/0]DMA memory: 0xff000000 - 0xffe00000:
[    0.395406].(1)[1:swapper/0][PWRAP] common driver init, version $Revision$
[    0.396371].(1)[1:swapper/0][PWRAP] HAL init: version $Revision$
[    0.397501].(1)[1:swapper/0][cpu_ntf] <26>c0783440 (dbg_reset_notify)
[    0.398322].(1)[1:swapper/0][Power/PM_INIT] Bus Frequency = 133250 KHz
[    0.399139].(1)[1:swapper/0][Power/clkmgr] [mt_subsys_init]SYS_MD1, change state: (1->0)
[    0.400231].(1)[1:swapper/0][Pll/fhctl] Enter: mt_freqhop_init
[    0.401039].(1)[1:swapper/0][Pll/fhctl] [mt_freqhop_init]: successfully create /proc/fhctl/dbg
[    0.402117].(1)[1:swapper/0][Pll/fhctl] [mt_freqhop_init]: successfully create /proc/fhctl/dumpregs
[    0.403267].(1)[1:swapper/0][Pll/fhctl] [mt_freqhop_init]: successfully create /proc/fhctl/help
[    0.404351].(1)[1:swapper/0][Pll/fhctl] Initial Frequency Hopping Driver
[    0.405213].(1)[1:swapper/0][Pll/fhctl] ARMPLL pll_con0 ori = 0x00001010
[    0.406046].(1)[1:swapper/0][Pll/fhctl] ARMPLL pll_con1 ori = 0x0009A000
[    0.406883].(1)[1:swapper/0][Pll/fhctl] MAINPLL pll_con0 ori = 0xF0000010
[    0.407728].(1)[1:swapper/0][Pll/fhctl] MAINPLL pll_con1 ori = 0x800F6000
[    0.408842].(1)[1:swapper/0][cpu_ntf] <27>c001e0f4 (restore_for_fiq)
[    0.409663].(1)[1:swapper/0][Power/Sleep] SLEEP_DPIDLE_EN:0, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:0
[    0.410805].(1)[1:swapper/0][Power/dcm] Enter: mt_dcm_init
[    0.411548].(1)[1:swapper/0][Power/dcm] [mt_dcm_init]: successfully create /proc/dcm/dbg
[    0.412558].(1)[1:swapper/0][Power/dcm] [mt_dcm_init]: successfully create /proc/dcm/dumpregs
[    0.413640].(1)[1:swapper/0][Power/dcm] [mt_dcm_init]: successfully create /proc/dcm/help
[    0.414694].(1)[1:swapper/0][Power/dcm] Enter: mt_fqmtr_init
[    0.415471].(1)[1:swapper/0][Power/dcm] [mt_fqmtr_init]: successfully create /proc/fqmtr/sta
[    0.416525].(1)[1:swapper/0][Power/dcm] [mt_fqmtr_init]: successfully create /proc/fqmtr/dbg
[    0.417600].(1)[1:swapper/0][Power/dcm] [mt_fqmtr_init]: successfully create /proc/fqmtr/help
[    0.418662].(1)[1:swapper/0][Power/dcm] Enter: mt_lpm_init
[    0.419408].(1)[1:swapper/0][Power/dcm] [mt_lpm_init]: successfully create /proc/lpm/sta
[    0.420416].(1)[1:swapper/0][Power/dcm] [mt_lpm_init]: successfully create /proc/lpm/dbg
[    0.421445].(1)[1:swapper/0][Power/dcm] [mt_lpm_init]: successfully create /proc/lpm/help
[    0.422481].(1)[1:swapper/0][Power/swap] [mt_idle_init]entry！
[    0.423307].(1)[1:swapper/0][EINT] CUST_EINT_MD1_CNT:0
[    0.424133].(1)[1:swapper/0]CIRQ init...
[    0.424618].(1)[1:swapper/0]CIRQ IRQ LINE NOT AVAILABLE！
[    0.425393].(1)[1:swapper/0]CIRQ init done...
[    0.425943].(1)[1:swapper/0]CIRQ create sysfs file done...
[    0.426907].(1)[1:swapper/0]Fail to enable interrupt 13
[    0.427577]-(0)[0:swapper/0]Fail to enable interrupt 13
[    0.454342].(1)[1:swapper/0][cpu_ntf] <28>c0785c9c (blk_cpu_notify)
[    0.455134].(1)[1:swapper/0][cpu_ntf] <29>c0785d28 (blk_iopoll_cpu_notify)
[    0.458652].(0)[1:swapper/0]SCSI subsystem initialized
[    0.461747].(1)[1:swapper/0][Power/RTC] rtc_init
[    0.463078].(1)[1:swapper/0][Power/RTC] read al time = 1970/01/01 00:00:00 (0)
[    0.465863].(1)[1:swapper/0][cpu_ntf] <30>c0640dc0 (dev_cpu_callback)
[    0.467557].(1)[1:swapper/0]------------[ cut here ]------------
[    0.468324].(1)[1:swapper/0]WARNING: at /home/tc4/workspace/MTK_Agr/alps/kernel/net/wireless/reg.c:401 regulatory_init+0xa0/0x144()
[    0.469800].(1)[1:swapper/0]db.txt is empty, you should update it...
[    0.470569].(1)[1:swapper/0]Modules linked in:
[    0.471144].(1)[1:swapper/0]Backtrace:
[    0.471644].(1)[1:swapper/0][<c001283c>] (dump_backtrace+0x0/0x114) from [<c0786518>] (dump_stack+0x20/0x24)
[    0.472901].(1)[1:swapper/0] r6:c0a74964 r5:00000009 r4:deb29ee0 r3:271ae95f
[    0.473791].(1)[1:swapper/0][<c07864f8>] (dump_stack+0x0/0x24) from [<c0048a74>] (warn_slowpath_common+0x5c/0x74)
[    0.475087].(1)[1:swapper/0][<c0048a18>] (warn_slowpath_common+0x0/0x74) from [<c0048b48>] (warn_slowpath_fmt+0x40/0x48)
[    0.476445].(1)[1:swapper/0] r8:c0a462c8 r7:deb28000 r6:c0b31d80 r5:c0f4ca04 r4:c0b30288
[    0.477430].(1)[1:swapper/0]r3:00000009
[    0.477947].(1)[1:swapper/0][<c0048b08>] (warn_slowpath_fmt+0x0/0x48) from [<c0a74964>] (regulatory_init+0xa0/0x144)
[    0.479261].(1)[1:swapper/0] r3:00000000 r2:c0a119e8
[    0.479896].(1)[1:swapper/0][<c0a748c4>] (regulatory_init+0x0/0x144) from [<c0a74854>] (cfg80211_init+0x60/0xd0)
[    0.481166].(1)[1:swapper/0] r4:00000000
[    0.481669].(1)[1:swapper/0][<c0a747f4>] (cfg80211_init+0x0/0xd0) from [<c0008774>] (do_one_initcall+0x130/0x1b4)
[    0.482964].(1)[1:swapper/0] r5:00000004 r4:c0a9bd38
[    0.483593].(1)[1:swapper/0][<c0008644>] (do_one_initcall+0x0/0x1b4) from [<c0a46a04>] (kernel_init+0x104/0x1cc)
[    0.484880].(1)[1:swapper/0][<c0a46900>] (kernel_init+0x0/0x1cc) from [<c004d464>] (do_exit+0x0/0x7d8)
[    0.486074].(1)[1:swapper/0]---[ end trace fa7d667a359fcdd5 ]---
[    0.566789].(0)[1:swapper/0][ftrace]event 'sched_switch' is enabled
[    0.567883].(0)[1:swapper/0][ftrace]event 'sched_wakeup' is enabled
[    0.568826].(0)[1:swapper/0][ftrace]event 'sched_wakeup_new' is enabled
[    0.569791].(0)[1:swapper/0][ftrace]event 'irq_handler_entry' is enabled
[    0.570759].(0)[1:swapper/0][ftrace]event 'irq_handler_exit' is enabled
[    0.571695].(0)[1:swapper/0][ftrace]event 'softirq_entry' is enabled
[    0.572598].(0)[1:swapper/0][ftrace]event 'softirq_exit' is enabled
[    0.573487].(0)[1:swapper/0][ftrace]event 'softirq_raise' is enabled
[    0.574408].(0)[1:swapper/0][ftrace]event 'sched_migrate_task' is enabled
[    0.575385].(0)[1:swapper/0][ftrace]event 'tracing_on' is enabled
[    0.576257].(0)[1:swapper/0][ftrace]event 'cpu_hotplug' is enabled
[    0.577135].(0)[1:swapper/0][ftrace]event 'ipi_handler_entry' is enabled
[    0.578163].(0)[1:swapper/0][ftrace]event 'ipi_handler_exit' is enabled
[    0.579105].(0)[1:swapper/0][ftrace]event 'unnamed_irq' is enabled
[    0.579995].(0)[1:swapper/0][ftrace]ftrace ready...
[    0.583586].(1)[1:swapper/0][RT_MONITOR]WARNNING [1:swapper/0] SET NOT ALLOW RT Prio [99] for proc [19:touch_freq_up_t]
[    0.585247].(1)[1:swapper/0][Power/PMIC] ******** MT6323 pmic driver probe！ ********
[    0.586239].(1)[1:swapper/0][Power/PMIC] MT6323 PMIC CID=0x2023
[    0.586984].(1)[1:swapper/0][Power/PMIC] [Kernel_PMIC_INIT_SETTING_V1] PMIC Chip = 2023
[    0.588046].(1)[1:swapper/0][Power/PMIC] [Kernel_PMIC_INIT_SETTING_V1] 20130328_0.85v
[    0.589845].(1)[1:swapper/0][Power/PMIC] [PMIC_INIT_SETTING_V1] Done
[    0.590636].(1)[1:swapper/0][Power/PMIC] [PMIC_CUSTOM_SETTING_V1] Done
[    0.591451].(1)[1:swapper/0][Power/PMIC] [PMIC_EINT_SETTING] start: CUST_EINT_MT6323_PMIC_NUM=16
[    0.593537].(1)[1:swapper/0][Power/PMIC] [CUST_EINT] CUST_EINT_MT6323_PMIC_NUM=16
[    0.594471].(1)[1:swapper/0][Power/PMIC] [CUST_EINT] CUST_EINT_MT6323_PMIC_DEBOUNCE_CN=1
[    0.595479].(1)[1:swapper/0][Power/PMIC] [CUST_EINT] CUST_EINT_MT6323_PMIC_POLARITY=1
[    0.596456].(1)[1:swapper/0][Power/PMIC] [CUST_EINT] CUST_EINT_MT6323_PMIC_SENSITIVE=1
[    0.597443].(1)[1:swapper/0][Power/PMIC] [CUST_EINT] CUST_EINT_MT6323_PMIC_DEBOUNCE_EN=1
[    0.598499].(1)[1:swapper/0][Power/PMIC] [PMIC_EINT_SETTING] Done
[    0.599554].(0)[1:swapper/0][Power/PMIC] [pmic_thread_kthread] Done
[    0.599580].(1)[20:pmic_thread_kth][Power/PMIC] [pmic_thread_kthread] enter
[    0.599594].(1)[20:pmic_thread_kth][Power/PMIC] [pmic_thread_kthread] running
[    0.599618].(1)[20:pmic_thread_kth][Power/PMIC] [INT] int_status_val_0=0x0
[    0.599638].(1)[20:pmic_thread_kth][Power/PMIC] [INT] int_status_val_1=0x0
[    0.600347].(0)[1:swapper/0]********** ldo status dump [1:ON,0:OFF]**********
[    0.600856].(1)[20:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_0=0x0
[    0.600877].(1)[20:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_1=0x0
[    0.604705].(0)[1:swapper/0]VRTC    =1, VA      =1, VCAMA   =0, VCAMD   =0
[    0.607425].(0)[1:swapper/0]VCAM_AF =0, VCAM_IO =0, VCN28   =0, VCN33   =0
[    0.608338].(0)[1:swapper/0]VCN_1V8 =0, VEMC_3V3=1, VGP1    =1, VGP2    =0
[    0.609195].(0)[1:swapper/0]VGP3    =0, VIBR    =0, VIO18   =1, VIO28   =1
[    0.610052].(0)[1:swapper/0]VM      =1, VMC     =1, VMCH    =1, VRF18   =1
[    0.610908].(0)[1:swapper/0]VSIM1   =0, VSIM2   =0, VTCXO   =1, VUSB    =1
[    0.611845].(0)[1:swapper/0][Power/PMIC] [PMIC] pmic_debug_init : done.
[    0.612997].(0)[1:swapper/0][Power/PMIC] ******** mt_pmic_probe！ ********
[    0.614355].(0)[1:swapper/0][Power/PMIC] ****[pmic_mt6323_init] Initialization : DONE ！
[    0.685588].(0)[1:swapper/0][cpu_ntf] <31>c078367c (regs_hotplug_callback)
[    0.686496].(0)[1:swapper/0]GPT: chipver=35328
[    0.687441].(0)[1:swapper/0][BOOT] CHIP = 0xca01 0x0000
[    0.688242].(0)[1:swapper/0][Power/hotplug] mt_hotplug_mechanism_init
[    0.690589].(0)[1:swapper/0][Power/DVFS] cpufreq driver registration done
[    0.691718].(0)[1:swapper/0][ccci/ctl] (0)EN(1):MemBase(0x9C000000)
[    0.692499].(0)[1:swapper/0][ccci/ctl] (0)MEMStart(0x9C000000):MemSize(0x01200000)
[    0.693442].(0)[1:swapper/0][ccci/ctl] (0)SmemStart(0x9D200000):SmemSize(0x00200000)
[    0.696452].(0)[1:swapper/0]type=2000 audit(0.600:1): initialized
[    0.774827].(1)[1:swapper/0][cpu_ntf] <32>c078268c (cpu_callback)
[    0.775712].(1)[1:swapper/0][cpu_ntf] <33>c0785b04 (vmstat_cpuup_callback)
[    0.776909].(1)[1:swapper/0]@@@@@@ [compaction_init] Register early suspend callback @@@@@@
[    0.818475].(0)[1:swapper/0][create_fat_proc]: successfully create /proc/fat/dbg_printk
[    0.821341].(1)[1:swapper/0]yaffs: yaffs built Jun 26 2015 11:06:32 Installing.
[    0.829759].(1)[1:swapper/0][cpu_ntf] <34>c0785db4 (percpu_counter_hotcpu_callback)
[    0.837088].(1)[1:swapper/0][cpu_ntf] <35>c0785f70 (topology_cpu_callback)
[    0.852969].(1)[1:swapper/0][CharDev WARN！] Not MT char device: 108:PPP
[    0.856804].(1)[1:swapper/0][CharDev WARN！] Not MT char device: 166:ttyACM
[    0.864312].(0)[1:swapper/0][cpu_ntf] <36>c07860ac (cpufreq_stat_cpu_callback)
[    0.867572].(0)[1:swapper/0][zram_init][790] ZCompress[c02e3fb0] ZDecompress[c02e41cc]
[    0.868894].(0)[1:swapper/0][cpu_ntf] <37>c03e01f4 (zs_cpu_notifier)
[    0.874733].(0)[1:swapper/0]MT_SCHED: Init complete, device major number = 252
[    0.875719].(0)[1:swapper/0][cpu_ntf] <38>c0415794 (sched_cpu_notify)
[    0.877300].(0)[1:swapper/0]------------[ cut here ]------------
[    0.878374].(0)[1:swapper/0]WARNING: at /home/tc4/workspace/MTK_Agr/alps/kernel/fs/proc/generic.c:586 proc_register+0xf0/0x1bc()
[    0.879823].(0)[1:swapper/0]proc_dir_entry '/proc/boot_mode' already registered
[    0.880732].(0)[1:swapper/0]Modules linked in:
[    0.881284].(0)[1:swapper/0]Backtrace:
[    0.881785].(0)[1:swapper/0][<c001283c>] (dump_backtrace+0x0/0x114) from [<c0786518>] (dump_stack+0x20/0x24)
[    0.883012].(0)[1:swapper/0] r6:c01b7c78 r5:00000009 r4:deb29ec8 r3:271ae95f
[    0.883903].(0)[1:swapper/0][<c07864f8>] (dump_stack+0x0/0x24) from [<c0048a74>] (warn_slowpath_common+0x5c/0x74)
[    0.885198].(0)[1:swapper/0][<c0048a18>] (warn_slowpath_common+0x0/0x74) from [<c0048b48>] (warn_slowpath_fmt+0x40/0x48)
[    0.886556].(0)[1:swapper/0] r8:de697dc0 r7:c0ad0e88 r6:de6978c0 r5:de697915 r4:deebb8c0
[    0.887540].(0)[1:swapper/0]r3:00000009
[    0.888093].(0)[1:swapper/0][<c0048b08>] (warn_slowpath_fmt+0x0/0x48) from [<c01b7c78>] (proc_register+0xf0/0x1bc)
[    0.889386].(0)[1:swapper/0] r3:c0ad0edd r2:c092ad48
[    0.890018].(0)[1:swapper/0][<c01b7b88>] (proc_register+0x0/0x1bc) from [<c01b7f90>] (proc_create_data+0x7c/0xc0)
[    0.891298].(0)[1:swapper/0] r8:c0a462c8 r7:deb28000 r6:c0b31d80 r5:c07f788c r4:de6978c0
[    0.892323].(0)[1:swapper/0][<c01b7f14>] (proc_create_data+0x0/0xc0) from [<c0a63580>] (boot_common_init+0x2c/0x44)
[    0.893625].(0)[1:swapper/0] r5:00000006 r4:00000000
[    0.894256].(0)[1:swapper/0][<c0a63554>] (boot_common_init+0x0/0x44) from [<c0008774>] (do_one_initcall+0x130/0x1b4)
[    0.895569].(0)[1:swapper/0] r4:c0a9c124
[    0.896071].(0)[1:swapper/0][<c0008644>] (do_one_initcall+0x0/0x1b4) from [<c0a46a04>] (kernel_init+0x104/0x1cc)
[    0.897356].(0)[1:swapper/0][<c0a46900>] (kernel_init+0x0/0x1cc) from [<c004d464>] (do_exit+0x0/0x7d8)
[    0.898668].(0)[1:swapper/0]---[ end trace fa7d667a359fcdd6 ]---
[    0.899449].(0)[1:swapper/0][mlog] reset format 47 %c <%ld> [%5lu .%06lu]  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %7lu  %7lu u
[    0.903144].(0)[1:swapper/0][mlog] reset buffer
[    0.903787].(0)[1:swapper/0][GPIO] version: mt-gpio
[    0.905383].(0)[1:swapper/0][aee/ipanic] aee-emmc-ipanic: startup, partition assgined expdb
[    0.906427].(0)[1:swapper/0]ion_init()
[    0.907158].(0)[1:swapper/0][ion_dbg] ion_drv_probe() heap_nr=3
[    0.908757].(1)[1:swapper/0][ion_dbg] ion_carveout: base=0x0,size=0x0
[    0.910009].(1)[1:swapper/0][Power/BatMeter] [battery_meter_probe] probe
[    0.910899].(1)[1:swapper/0][Power/BatMeter] proc_create fgadc_proc_fops
[    0.911944].(1)[1:swapper/0][Power/BatMeter] [battery_meter_driver] Initialization : DONE
[    0.913344].(1)[1:swapper/0][Power/Battery] ******** mt_batteryNotify_probe！ ********
[    0.914419].(1)[1:swapper/0][Power/Battery] proc_create battery_cmd_proc_fops
[    0.915309].(1)[1:swapper/0][Power/Battery] ******** mtk_battery_cmd！ ********
[    0.916285].(1)[1:swapper/0][Power/Battery] ****[battery_driver] Initialization : DONE ！
[    0.917442].(1)[1:swapper/0]MTK-BTIF[I]hal_btif_info_get:_btif_tx_fifo_init succeed
[    0.918604].(1)[1:swapper/0]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed,vir addr:0xffdfe000, phy addr:0x9e752000
[    0.920048].(1)[1:swapper/0]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed,vir addr:0xffdfc000, phy addr:0x9e74c000
[    0.921725].(0)[1:swapper/0][RT_MONITOR]WARNNING [1:swapper/0] SET NOT ALLOW RT Prio [80] for proc [50:btif_rxd]
[    0.923009].(0)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:set RT to btif_rxd workqueue succeed
[    0.924079].(0)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:rx_SPIn_lock init succeed
[    0.925024].(0)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:nothing is done when btif tx in user's thread
[    0.926184].(0)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:succeed
[    0.927089].(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:devuce number allocation succeed
[    0.928186].(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:add btif dev to kernel succeed
[    0.929281].(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create class for btif succeed
[    0.930480].(0)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create device for btif succeed
[    0.931469].(0)[1:swapper/0]dumchar_int
[    0.932010].(0)[1:swapper/0]dumchar: register /proc/dumchar_info success c045405c
[    0.933041].(0)[1:swapper/0]DumChar: init USIF  Done！
[    0.933781].(0)[1:swapper/0]<HWMSEN> hwmsen_init
[    0.934467].(0)[1:swapper/0]ALMK driver initialize
[    0.935060].(0)[1:swapper/0]Register the ALMK driver device
[    0.935936].(0)[1:swapper/0]Register the ALMK driver
[    0.936634].(0)[1:swapper/0]-------------almk driver probe-------
[    0.937401].(0)[1:swapper/0]Get ALMK Device Major number (262144000)
[    0.938559].(0)[1:swapper/0]ALMK Probe Done
[    0.939148].(0)[1:swapper/0][HID:] hid_keyboard_init OK
[    0.939901].(0)[1:swapper/0][LED]mt65xx_leds_init
[    0.940700].(0)[1:swapper/0]****[mt_auxadc_driver] Initialization : DONE
[    0.944475].(0)[1:swapper/0][CharDev WARN！] Not MT char device: 154:mtk_wcn_detect
[    0.945712].(0)[1:swapper/0][WMT-DETECT][I]wmt_detect_init:driver(major 154) installed success
[    0.946895].(0)[1:swapper/0][SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0
[    0.948023].(0)[1:swapper/0][CONN-MD-DFT]<conn_md_init> <453>
[    0.948739].(0)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init message queue list succeed
[    0.949747].(0)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init active queue list succeed
[    0.950745].(0)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init user information list succeed
[    0.951828].(0)[1:swapper/0][CONN_MD_DMP][I]conn_md_dmp_init:alloc memory for msg log system done, size:0x00000320
[    0.953124].(0)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:conn_md_dmp_init succeed
[    0.954424].(1)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:create conn_md_thread succeed, wakeup it
[    0.955542].(1)[1:swapper/0][CONN-MD-DFT]<co