72待机电流大， 这样的log内容能找出原因吗？
时间：10-02
整理：3721RD
点击：
72按power键待机后，电流在40mA- 80mA之间跳动， 貌似没有真正进入睡眠状态。
如下是通过串口抓取的log内容， log不停的的在重复这样的内容， 这个是什么原因造成的啊?
[ 1373.606580] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.610740] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.612857] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.624859] (0)[46:bat_thread_kthr][oam_init_inf] 3649, 76, 25, 75, 3668, -20
[ 1373.626123] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] u4channel[5]=20482.
[ 1373.627334] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] u4channel[5]=20482.
[ 1373.628207] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] adc_result_temp=2048
2, adc_result=1125, r_val_temp=1.
[ 1373.629456]-(0)[46:bat_thread_kthr][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1373.630477] (0)[46:bat_thread_kthr][Power/BatMeter] [force_get_tbat] 0,1125,0
,0,0,-20
[ 1373.631450] (0)[46:bat_thread_kthr][Power/BatMeter] [oam_run_inf] 3668, 3668,
3635, 388, 388, 849, 849, 149, 149, 1700, -20, 75
[ 1373.632882] (0)[46:bat_thread_kthr][Power/BatMeter] [oam_result_inf] 75, 75,
75, 75, 75, 25
[ 1373.644820] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.646957] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.648582] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1373.649668] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.651294] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1373.651927] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1373.652963] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1373.674332] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (0)
[ 1373.675303] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (0)
[ 1373.676126] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (3634)
[ 1373.677125] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (3634)
[ 1373.677981] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (-20)
[ 1373.678968] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (-20)
[ 1373.679815] (0)[46:bat_thread_kthr][Power/Battery] AvgVbat=(3632),bat_vol=(36
34),AvgI=(1),I=(0),VChr=(350),AvgT=(-20),T=(-20),pre_SOC=(25),SOC=(25),ZCV=(3649
)
[ 1373.681584] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] mt_battery_notif
y_check
[ 1373.682548] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] BATTERY_NOTIFY_C
ASE_0001_VCHARGER (0)
[ 1373.684344] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1373.685148] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1373.685778] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1373.686813] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1373.687578] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1373.711082] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] BATTERY_NOTIFY_C
ASE_0002_VBATTEMP (0)
[ 1373.712472]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> ac
[ 1373.713826]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> usb
[ 1373.715243] (0)[46:bat_thread_kthr][Power/Battery] UI_SOC=(25), resetBatteryM
eter=(0)
[ 1373.716828]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> battery
[ 1373.717883] (0)[46:bat_thread_kthr][Power/Battery] wait event
[ 1373.728966] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1373.730683] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1373.731395] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1373.732658] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1373.733412] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1373.764344] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1373.765144] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1373.765830] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1373.767093] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1373.767847] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1373.768777] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1373.815504] (0)[59:kworker/u:2]msdc1 -> ！ Set<260KHz> Source<200000KHz> ->
sclk<259KHz> DDR<0> mode<0> div<193>
[ 1373.871107] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.883473] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.889397] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.891619] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.893892] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.916350] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1373.917552] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.922810] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1373.923457] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1373.925629] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1373.926392] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1373.927194] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1373.927824] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1373.928858] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1373.929624] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1373.950662] (0)[59:kworker/u:2]msdc1 -> set mclk to 0[Power/Kernel]:ws deacti
vate-> mmc1_detect
[ 1373.952875] (0)[5:kworker/u:0][HIB/AUTOSLEEP][try_to_suspend]calling pm_suspe
nd() state(3)
[ 1373.960973] (0)[8502:re-initialized>][Power/AlARM] alarm_open (8502:8502)
[ 1374.088436] (0)[5:kworker/u:0]done.
[ 1374.088920] (0)[5:kworker/u:0]Freezing user space processes ...
[ 1374.103781]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.104370]-(0)[0:swapper/0][SPM] spm_let_the_dog_home
[ 1374.105009]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.105767]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.106356]-(0)[0:swapper/0][WDT] suspend
[ 1374.106950]-(0)[0:swapper/0][SPM] Deep Idle with cpu_pdn=1, pwr_level=1, infr
a_pdn=0
[ 1374.108028]-(0)[0:swapper/0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.108864]-(0)[0:swapper/0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.109628]-(0)[0:swapper/0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.110441]-(0)[0:swapper/0][SPM] spm_let_the_dog_out
[ 1374.111077]-(0)[0:swapper/0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.111852]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.112606]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.113195]-(0)[0:swapper/0][WDT] resume(1)
[ 1374.113711]-(0)[0:swapper/0]deepidle
[ 1374.114168]-(0)[0:swapper/0]timer_left=128464, timer_left2=0, delta=128464
[ 1374.115031]-(0)[0:swapper/0]0xf0008000=0x0, 0xf0008004=0x0, 0xf0008008=0x0, 0
xf0008040=0x0, 0xf0008044=0x0, 0xf0008048=0x0, 0xf000804c=0x0, 0xf00
08010=0x0, 0xf0008014=0x0, 0xf0008018=0x0, 0xf000801c=0x0
[ 1374.115046]-(0)[0:swapper/0], dpidle_wdt_val : 0(elapsed 0.02 seconds) done.
[ 1374.118787] (0)[5:kworker/u:0]Freezing remaining freezable tasks ...
[ 1374.120213]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.120820]-(0)[0:swapper/0][SPM] spm_let_the_dog_home
[ 1374.121459]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.122219]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.122806]-(0)[0:swapper/0][WDT] suspend
[ 1374.123397]-(0)[0:swapper/0][SPM] Deep Idle with cpu_pdn=1, pwr_level=1, infr
a_pdn=0
[ 1374.124475]-(0)[0:swapper/0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.125308]-(0)[0:swapper/0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.126074]-(0)[0:swapper/0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.126887]-(0)[0:swapper/0][SPM] spm_let_the_dog_out
[ 1374.127523]-(0)[0:swapper/0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.128297]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.129051]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.129640]-(0)[0:swapper/0][WDT] resume(1)
[ 1374.130156]-(0)[0:swapper/0]deepidle
[ 1374.130612]-(0)[0:swapper/0]timer_left=174870, timer_left2=0, delta=174870
[ 1374.131476]-(0)[0:swapper/0]0xf0008000=0x0, 0xf0008004=0x0, 0xf0008008=0x0, 0
xf0008040=0x0, 0xf0008044=0x0, 0xf0008048=0x0, 0xf000804c=0x0, 0xf00
08010=0x0, 0xf0008014=0x0, 0xf0008018=0x0, 0xf000801c=0x0
[ 1374.131491]-(0)[0:swapper/0], dpidle_wdt_val : 0(elapsed 0.01 seconds) done.
[ 1374.135276] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.136203] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_begin (1)(1) @@@@@@@@@@@
@@@@
[ 1374.137136] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.138630] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_suspend:++
[ 1374.139336] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_suspend:--, i_ret:0
[ 1374.140293] (0)[5:kworker/u:0][mtk_thermal_suspend]
[ 1374.140918] (0)[5:kworker/u:0][Power/DVFS] mt_cpufreq_suspend
[ 1374.141630] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA3: 0x58
[ 1374.142442] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA4: 0xe0
[ 1374.143255] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA5: 0xf0
[ 1374.144121] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA6: 0x2
[ 1374.144922] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA7: 0x2
[ 1374.145970] (0)[5:kworker/u:0][DISP/MTKFB] [FB Driver] mtkfb_suspend(): 0x2
[ 1374.146842] (0)[5:kworker/u:0][M4U] [pid=5]SMI register backup when suspend p
hone
[ 1374.147794] (0)[5:kworker/u:0][M4U] [pid=5]register backup buffer needs: 140
[ 1374.148693]-(0)[5:kworker/u:0]+AudDrv_Clk_On, Aud_AFE_Clk_cntr:0
[ 1374.149490]-(0)[5:kworker/u:0]+ AudDrv_Clk_Off, Aud_AFE_Clk_cntr:0
[ 1374.150267] (0)[5:kworker/u:0]-AudDrv_Store_reg
[ 1374.150870] (0)[5:kworker/u:0]msdc0 -> PM Suspend
[ 1374.151454] (0)[5:kworker/u:0]msdc0 select card<0x00000000>
[ 1374.182900]-(0)[0:swapper/0][Power/Battery] [charger_hv_detect_sw_workaround]
[ 1374.183853] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery before
[ 1374.185093] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery after
[ 1374.186319] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] upmu_chr_get_vcdt_hv_det() ！= 1
[ 1374.187670] (0)[47:mtk charger_hv_][Power/Battery] --------------------------
------------------------
[ 1374.189280] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
Reg[0]=0x40
[ 1374.190620] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
write Reg[0]=0xc0
[ 1374.213724] (0)[5:kworker/u:0]msdc LDO<4> power off
[ 1374.214347] (0)[5:kworker/u:0][Power/PMIC] [hwPowerDown] powerId:4 index:0 mo
d_name: msdc
[ 1374.215372] (0)[5:kworker/u:0][Power/PMIC] [4] PMU LDO Disable
[ 1374.216126] (0)[5:kworker/u:0][Power/PMIC] [dct_pmic_VEMC_3V3_enable] 0
[ 1374.217064] (0)[5:kworker/u:0][PWRAP] Suspend！
[ 1374.217615] (0)[5:kworker/u:0][PWRAP] init_done0: 1 init_done1: 1 init_done2:
1 pattern: 0xABCD
[ 1374.218740] (0)[5:kworker/u:0][UART1] Suspend(0)！
[ 1374.219330] (0)[5:kworker/u:0][UART0] Suspend(0)！
[ 1374.219993] (0)[5:kworker/u:0]Mali<1>: Mali PM:mali_pm_suspend
[ 1374.220712] (0)[5:kworker/u:0]Mali<2>: Mali PM: mali_pm_os_suspend: from = 0
[ 1374.221601] (0)[5:kworker/u:0]Mali<2>: _mali_osk_pm_delete_callback_timer (0)
[ 1374.222484] (0)[5:kworker/u:0]Mali<1>: Mali platform: Got MALI_POWER_MODE_DEE
P_SLEEP event, already off
[ 1374.224637] (0)[5:kworker/u:0][Power/RTC] read tc time do_gettimeofday = 1357
000900.000512066
[ 1374.225706] (0)[5:kworker/u:0][Power/BatMeter] [oam] get_hw_ocv (pchr) : adc_
result_reg=16573, adc_result=3641
[ 1374.226948] (0)[5:kworker/u:0][Power/BatMeter] [battery_meter_suspend]
[ 1374.228072] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.228991] (0)[5:kworker/u:0]now:00=41:40 01/01/2013. min.tv64=7809586550314
4
[ 1374.229920] (0)[5:kworker/u:0]
[ 1374.229926] (0)[5:kworker/u:0]ccci_helper_suspend
[ 1374.230906] (0)[5:kworker/u:0][Power/PMIC] ******** MT6323 pmic driver suspen
d！ ********
[ 1374.232051] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.233073] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.234135] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_prepare @@@@@@@@@@@@@@@@
@@@@
[ 1374.235064] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.236844] (0)[5:kworker/u:0]Disabling non-boot CPUs ...
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] _Chip_pm_enter @@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_CON0 0xF0205100 = 0x1010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_CON1 0xF0205104 = 0x8009A000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_PWR_CON0 0xF0205110 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_CON0 0xF0205120 = 0xF0000010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_CON1 0xF0205124 = 0x800F6000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_PWR_CON0 0xF0205130 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_CON0 0xF0205140 = 0X30000000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_CON1 0xF0205144 = 0x80000030
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_PWR_CON0 0xF0205150 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_CON0 0xF0205240 = 0xF0000010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_CON1 0xF0205244 = 0x2134000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_PWR_CON0 0xF0205250 = 0x2
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_PATHSEL_CON 0xF0205254 = 0x0
[ 1374.237536]-(0)[5:kworker/u:0][Power/BatMeter] vbat_val=3634, ret_time=5400
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_let_the_dog_home
[ 1374.237536]-(0)[5:kworker/u:0]WDT:[mtk_wdt_restart] type =1, pid=5
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][WDT] suspend
[ 1374.237536]-(0)[5:kworker/u:0][SPM] Kernel Suspend with cpu_pdn=1, infra_pdn=
1
[ 1374.237536]-(0)[5:kworker/u:0][SPM] md_settle = 99, settle = 99
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.237536]-(0)[5:kworker/u:0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_let_the_dog_out
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.237536]-(0)[5:kworker/u:0]WDT:[mtk_wdt_restart] type =1, pid=5
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][WDT] resume(1)
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] Wakeup Succefully
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep]
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] slp_abort_cnt:174,slp_normal_cnt:
0
[ 1374.238606] (0)[5:kworker/u:0]usb save current success
[ 1374.239589] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.240517] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_finish @@@@@@@@@@@@@@@@@
@@@@
[ 1374.241450] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.242488] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.243436] (0)[5:kworker/u:0][Power/PMIC] ******** MT6323 pmic driver resume
！ ********
[ 1374.244544] (0)[5:kworker/u:0]
[ 1374.244551] (0)[5:kworker/u:0]ccci_helper_resume
[ 1374.245692] (0)[5:kworker/u:0][Power/BatMeter] [oam] get_hw_ocv (pchr) : adc_
result_reg=16573, adc_result=3641
[ 1374.247735] (0)[5:kworker/u:0][Power/RTC] read tc time do_gettimeofday = 1357
000900.000535151
[ 1374.248794] (0)[5:kworker/u:0][Power/BatMeter] sleeptime=(0)s, be_ocv=(3649),
af_ocv=(3649), D0=(75), car1=(149), car2=(149)
[ 1374.250202] (0)[5:kworker/u:0][Power/BatMeter] [battery_meter_resume]
[ 1374.251085] (0)[5:kworker/u:0]Mali<1>: Mali PM: mali_pm_resume
[ 1374.251805] (0)[5:kworker/u:0]Mali<2>: [+]MFG enable_clock
[ 1374.252563]-(0)[5:kworker/u:0][SMI] [pid=5]on_larb_power_on(), larb_idx=0
[ 1374.253418]-(0)[5:kworker/u:0][SMI] [pid=5]set as SMI_BWC_SCEN_VR1066Mali<2>:
[-]MFG enable_clock
[ 1374.254596] (0)[5:kworker/u:0]Mali<2>: Mali PM: mali_pm_os_resume: from = 1
[ 1374.255562] (0)[5:kworker/u:0][UART0] Resume(0)！
[ 1374.256141] (0)[5:kworker/u:0][UART1] Resume(0)！
[ 1374.256729] (0)[5:kworker/u:0][PWRAP] Resume！
[ 1374.257268] (0)[5:kworker/u:0][PWRAP] init_done0: 1 init_done1: 1 init_done2:
1 pattern: 0x1234
[ 1374.258433]-(0)[5:kworker/u:0]msdc0 on clock failed ===> retry once
[ 1374.259231] (0)[5:kworker/u:0]msdc0 -> PM Resume
[ 1374.259787] (0)[5:kworker/u:0]msdc LDO<4> power on<3300>
[ 1374.260484] (0)[5:kworker/u:0][Power/PMIC] [hwPowerOn] acquire powerId:4 inde
x:0 mod_name: msdc powerVolt:3300
[ 1374.261737] (0)[5:kworker/u:0][Power/PMIC] [4] PMU LDO Enable
[ 1374.262479] (0)[5:kworker/u:0][Power/PMIC] ****[dct_pmic_VEMC_3V3_sel] value=
3300
[ 1374.263444] (0)[5:kworker/u:0][Power/PMIC] [dct_pmic_VEMC_3V3_enable] 1
[ 1374.274404] (0)[5:kworker/u:0]msdc0 -> ！ Set<52000KHz> Source<200000KHz> ->
sclk<50000KHz> DDR<1> mode<2> div<0>
[ 1374.343906] (0)[5:kworker/u:0]msdc0 select card<0x00010000>
[ 1374.344623]-(0)[5:kworker/u:0]msdc1 on clock failed ===> retry once
[ 1374.346663] (0)[5:kworker/u:0]AudDrv_resume
[ 1374.347159] (0)[5:kworker/u:0]+AudDrv_resume+AudDrv_Clk_On, Aud_AFE_Clk_cntr:
0
[ 1374.348177]-(0)[5:kworker/u:0]+ AudDrv_Clk_Off, Aud_AFE_Clk_cntr:0
[ 1374.348977] (0)[5:kworker/u:0][M4U] [pid=5]SMI register restore when resume p
hone
[ 1374.349941] (0)[5:kworker/u:0][DISP/MTKFB] [FB Driver] mtkfb_resume()
[ 1374.351093] (0)[5:kworker/u:0][Power/DVFS] mt_cpufreq_resume
[ 1374.351794] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA3: 0x58
[ 1374.352606] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA4: 0x58
[ 1374.353419] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA5: 0x48
[ 1374.354260] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA6: 0x2
[ 1374.355062] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA7: 0x2
[ 1374.355869] (0)[5:kworker/u:0][mtk_thermal_resume]
[ 1374.356491] (0)[5:kworker/u:0]stop_GPT: GPT4 is not in use！
[ 1374.357282] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_resume:++
[ 1374.357973] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_resume:--, i_ret:0
[ 1374.359464] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.360392] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_end @@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.361323] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.362267] (0)[5:kworker/u:0]Restarting tasks ...
[ 1374.363308] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] u4channel[3]=12792.
[ 1374.364218] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] adc_result_temp=12792,
adc_result=702, r_val_temp=1.
[ 1374.365432]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1374.366455] (0)[6675:kworker/0:0][Power/WMT_Thermal] [wmt_thz_get_temp] temp
= 0
[ 1374.367536] (0)[6675:kworker/0:0][Power/Battery] [EM] FG_Battery_CurrentConsu
mption : 388/10 mA
[ 1374.376282]-(0)[581:AlarmManager][Power/Alarm] alarm wait
[ 1374.377103]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> KeyEvent
s
[ 1374.377970]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event0-5
47
[ 1374.378821]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event1-5
47
[ 1374.379668]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event3-5
47
[ 1374.380515]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event4-5
47
[ 1374.381398]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> KeyEvent
s
[ 1374.394855] (0)[5:kworker/u:0]done.
[ 1374.395389]-(0)[59:kworker/u:2][Power/Kernel]:ws deactivate-> mmc0_det
ect
[ 1374.396327] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.397018] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.398283] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.399036] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.399959] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.400757] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.401441] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.402705] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.403458] (0)[59:kworker/u:2][Power/PMIC]
[ 1374.404165] (0)[5:kworker/u:0][Power/Kernel][print_active_wakeup_sources]: ac
tivity: mmc1_detect
[ 1374.410597] (0)[59:kworker/u:2]****[dct_pmic_VMCH_sel] value=3300
[ 1374.411411] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.444011] (0)[59:kworker/u:2]msdc1 -> ！ Set<400KHz> Source<200000KHz> ->
sclk<400KHz> DDR<0> mode<0> div<125>
[ 1374.487232] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.490759] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.492756] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.514265] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.516290] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.518697] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1374.519676] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.521303] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1374.521936] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1374.522972] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1374.533853] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1374.534660] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1374.535291] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1374.536326] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1374.537091] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1374.558201] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1374.559892] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.560605] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.561868] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.562622] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.563545] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.574110] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.574796] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.576060] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.576814] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1374.577744] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.614111] (0)[59:kworker/u:2]msdc1 -> ！ Set<300KHz> Source<200000KHz> ->
sclk<299KHz> DDR<0> mode<0> div<167>
[ 1374.656345] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.660505] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.662622] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.684376] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.686522] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.688147] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1374.689233] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.690857] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1374.691491] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1374.692526] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1374.693291] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1374.704186] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1374.704817] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1374.705852] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1374.706617] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1374.728467] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1374.730183] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.730895] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.732158] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.732913] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.739757] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.740560] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.741244] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.742508] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.743262] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1374.754240] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.795142] (0)[59:kworker/u:2]msdc1 -> ！ Set<260KHz> Source<200000KHz> ->
sclk<259KHz> DDR<0> mode<0> div<193>
[ 1374.870813] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.884282] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.903496] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.922918] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.942858] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.963782] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.986528] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.013042] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.047120] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.096264] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.175516] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.611826] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] u4channel[3]=12781.
[ 1375.612680] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] adc_result_temp=12781,
adc_result=702, r_val_temp=1.
[ 1375.616228]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1375.621771] (0)[6675:kworker/0:0][THERMAL/MONITOR] [.get_temp] tz: mtktspmic
dur: 10328
[ 1375.622800] (0)[6675:kworker/0:0][Power/WMT_Thermal]
[ 1375.729139] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.731360] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.733559] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.738826] (0)[6675:kworker/0:0][wmt_thz_get_temp] temp = 0
[ 1375.901763] (0)[6675:kworker/0:0][THERMAL/MONITOR] [.get_temp] tz: mtktswmt d
ur: 278959
[ 1375.902931] (0)[6675:kworker/0:0][Power/Battery] [EM] FG_Battery_CurrentConsu
mption : 388/10 mA
[ 1375.913146] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.918731] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1375.919915] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.921545] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1375.922179] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1375.923215] (0)[59:kworker/u:2][Power/PMIC]
[ 1375.937197] (0)[59:kworker/u:2][2] PMU LDO Disable
[ 1375.937835] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1375.942752] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1375.943386] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1375.949354] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1375.952970] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1376.191788]-(0)[8532:top][Power/Battery] [charger_hv_detect_sw_workaround]
[ 1376.254644] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery before
[ 1376.255899] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery after
[ 1376.257125] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] upmu_chr_get_vcdt_hv_det() ！= 1
[ 1376.258476] (0)[47:mtk charger_hv_][Power/Battery] --------------------------
------------------------
[ 1376.261959] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
Reg[0]=0x40
如下是通过串口抓取的log内容， log不停的的在重复这样的内容， 这个是什么原因造成的啊?
[ 1373.606580] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.610740] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.612857] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.624859] (0)[46:bat_thread_kthr][oam_init_inf] 3649, 76, 25, 75, 3668, -20
[ 1373.626123] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] u4channel[5]=20482.
[ 1373.627334] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] u4channel[5]=20482.
[ 1373.628207] (0)[46:bat_thread_kthr][Power/PMIC] [AUXADC] adc_result_temp=2048
2, adc_result=1125, r_val_temp=1.
[ 1373.629456]-(0)[46:bat_thread_kthr][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1373.630477] (0)[46:bat_thread_kthr][Power/BatMeter] [force_get_tbat] 0,1125,0
,0,0,-20
[ 1373.631450] (0)[46:bat_thread_kthr][Power/BatMeter] [oam_run_inf] 3668, 3668,
3635, 388, 388, 849, 849, 149, 149, 1700, -20, 75
[ 1373.632882] (0)[46:bat_thread_kthr][Power/BatMeter] [oam_result_inf] 75, 75,
75, 75, 75, 25
[ 1373.644820] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.646957] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.648582] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1373.649668] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.651294] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1373.651927] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1373.652963] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1373.674332] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (0)
[ 1373.675303] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (0)
[ 1373.676126] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (3634)
[ 1373.677125] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (3634)
[ 1373.677981] (0)[46:bat_thread_kthr][Power/Battery] batteryBufferFirst =0, dat
a= (-20)
[ 1373.678968] (0)[46:bat_thread_kthr][Power/Battery] bufferdata[15]= (-20)
[ 1373.679815] (0)[46:bat_thread_kthr][Power/Battery] AvgVbat=(3632),bat_vol=(36
34),AvgI=(1),I=(0),VChr=(350),AvgT=(-20),T=(-20),pre_SOC=(25),SOC=(25),ZCV=(3649
)
[ 1373.681584] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] mt_battery_notif
y_check
[ 1373.682548] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] BATTERY_NOTIFY_C
ASE_0001_VCHARGER (0)
[ 1373.684344] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1373.685148] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1373.685778] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1373.686813] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1373.687578] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1373.711082] (0)[46:bat_thread_kthr][Power/Battery] [BATTERY] BATTERY_NOTIFY_C
ASE_0002_VBATTEMP (0)
[ 1373.712472]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> ac
[ 1373.713826]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> usb
[ 1373.715243] (0)[46:bat_thread_kthr][Power/Battery] UI_SOC=(25), resetBatteryM
eter=(0)
[ 1373.716828]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> battery
[ 1373.717883] (0)[46:bat_thread_kthr][Power/Battery] wait event
[ 1373.728966] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1373.730683] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1373.731395] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1373.732658] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1373.733412] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1373.764344] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1373.765144] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1373.765830] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1373.767093] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1373.767847] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1373.768777] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1373.815504] (0)[59:kworker/u:2]msdc1 -> ！ Set<260KHz> Source<200000KHz> ->
sclk<259KHz> DDR<0> mode<0> div<193>
[ 1373.871107] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.883473] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.889397] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.891619] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.893892] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.916350] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1373.917552] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1373.922810] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1373.923457] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1373.925629] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1373.926392] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1373.927194] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1373.927824] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1373.928858] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1373.929624] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1373.950662] (0)[59:kworker/u:2]msdc1 -> set mclk to 0[Power/Kernel]:ws deacti
vate-> mmc1_detect
[ 1373.952875] (0)[5:kworker/u:0][HIB/AUTOSLEEP][try_to_suspend]calling pm_suspe
nd() state(3)
[ 1373.960973] (0)[8502:re-initialized>][Power/AlARM] alarm_open (8502:8502)
[ 1374.088436] (0)[5:kworker/u:0]done.
[ 1374.088920] (0)[5:kworker/u:0]Freezing user space processes ...
[ 1374.103781]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.104370]-(0)[0:swapper/0][SPM] spm_let_the_dog_home
[ 1374.105009]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.105767]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.106356]-(0)[0:swapper/0][WDT] suspend
[ 1374.106950]-(0)[0:swapper/0][SPM] Deep Idle with cpu_pdn=1, pwr_level=1, infr
a_pdn=0
[ 1374.108028]-(0)[0:swapper/0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.108864]-(0)[0:swapper/0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.109628]-(0)[0:swapper/0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.110441]-(0)[0:swapper/0][SPM] spm_let_the_dog_out
[ 1374.111077]-(0)[0:swapper/0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.111852]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.112606]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.113195]-(0)[0:swapper/0][WDT] resume(1)
[ 1374.113711]-(0)[0:swapper/0]deepidle
[ 1374.114168]-(0)[0:swapper/0]timer_left=128464, timer_left2=0, delta=128464
[ 1374.115031]-(0)[0:swapper/0]0xf0008000=0x0, 0xf0008004=0x0, 0xf0008008=0x0, 0
xf0008040=0x0, 0xf0008044=0x0, 0xf0008048=0x0, 0xf000804c=0x0, 0xf00
08010=0x0, 0xf0008014=0x0, 0xf0008018=0x0, 0xf000801c=0x0
[ 1374.115046]-(0)[0:swapper/0], dpidle_wdt_val : 0(elapsed 0.02 seconds) done.
[ 1374.118787] (0)[5:kworker/u:0]Freezing remaining freezable tasks ...
[ 1374.120213]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.120820]-(0)[0:swapper/0][SPM] spm_let_the_dog_home
[ 1374.121459]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.122219]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.122806]-(0)[0:swapper/0][WDT] suspend
[ 1374.123397]-(0)[0:swapper/0][SPM] Deep Idle with cpu_pdn=1, pwr_level=1, infr
a_pdn=0
[ 1374.124475]-(0)[0:swapper/0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.125308]-(0)[0:swapper/0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.126074]-(0)[0:swapper/0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.126887]-(0)[0:swapper/0][SPM] spm_let_the_dog_out
[ 1374.127523]-(0)[0:swapper/0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.128297]-(0)[0:swapper/0]WDT:[mtk_wdt_restart] type =1, pid=0
[ 1374.129051]-(0)[0:swapper/0][SPM] spm_wdt_restart
[ 1374.129640]-(0)[0:swapper/0][WDT] resume(1)
[ 1374.130156]-(0)[0:swapper/0]deepidle
[ 1374.130612]-(0)[0:swapper/0]timer_left=174870, timer_left2=0, delta=174870
[ 1374.131476]-(0)[0:swapper/0]0xf0008000=0x0, 0xf0008004=0x0, 0xf0008008=0x0, 0
xf0008040=0x0, 0xf0008044=0x0, 0xf0008048=0x0, 0xf000804c=0x0, 0xf00
08010=0x0, 0xf0008014=0x0, 0xf0008018=0x0, 0xf000801c=0x0
[ 1374.131491]-(0)[0:swapper/0], dpidle_wdt_val : 0(elapsed 0.01 seconds) done.
[ 1374.135276] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.136203] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_begin (1)(1) @@@@@@@@@@@
@@@@
[ 1374.137136] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.138630] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_suspend:++
[ 1374.139336] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_suspend:--, i_ret:0
[ 1374.140293] (0)[5:kworker/u:0][mtk_thermal_suspend]
[ 1374.140918] (0)[5:kworker/u:0][Power/DVFS] mt_cpufreq_suspend
[ 1374.141630] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA3: 0x58
[ 1374.142442] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA4: 0xe0
[ 1374.143255] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA5: 0xf0
[ 1374.144121] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA6: 0x2
[ 1374.144922] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA7: 0x2
[ 1374.145970] (0)[5:kworker/u:0][DISP/MTKFB] [FB Driver] mtkfb_suspend(): 0x2
[ 1374.146842] (0)[5:kworker/u:0][M4U] [pid=5]SMI register backup when suspend p
hone
[ 1374.147794] (0)[5:kworker/u:0][M4U] [pid=5]register backup buffer needs: 140
[ 1374.148693]-(0)[5:kworker/u:0]+AudDrv_Clk_On, Aud_AFE_Clk_cntr:0
[ 1374.149490]-(0)[5:kworker/u:0]+ AudDrv_Clk_Off, Aud_AFE_Clk_cntr:0
[ 1374.150267] (0)[5:kworker/u:0]-AudDrv_Store_reg
[ 1374.150870] (0)[5:kworker/u:0]msdc0 -> PM Suspend
[ 1374.151454] (0)[5:kworker/u:0]msdc0 select card<0x00000000>
[ 1374.182900]-(0)[0:swapper/0][Power/Battery] [charger_hv_detect_sw_workaround]
[ 1374.183853] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery before
[ 1374.185093] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery after
[ 1374.186319] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] upmu_chr_get_vcdt_hv_det() ！= 1
[ 1374.187670] (0)[47:mtk charger_hv_][Power/Battery] --------------------------
------------------------
[ 1374.189280] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
Reg[0]=0x40
[ 1374.190620] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
write Reg[0]=0xc0
[ 1374.213724] (0)[5:kworker/u:0]msdc LDO<4> power off
[ 1374.214347] (0)[5:kworker/u:0][Power/PMIC] [hwPowerDown] powerId:4 index:0 mo
d_name: msdc
[ 1374.215372] (0)[5:kworker/u:0][Power/PMIC] [4] PMU LDO Disable
[ 1374.216126] (0)[5:kworker/u:0][Power/PMIC] [dct_pmic_VEMC_3V3_enable] 0
[ 1374.217064] (0)[5:kworker/u:0][PWRAP] Suspend！
[ 1374.217615] (0)[5:kworker/u:0][PWRAP] init_done0: 1 init_done1: 1 init_done2:
1 pattern: 0xABCD
[ 1374.218740] (0)[5:kworker/u:0][UART1] Suspend(0)！
[ 1374.219330] (0)[5:kworker/u:0][UART0] Suspend(0)！
[ 1374.219993] (0)[5:kworker/u:0]Mali<1>: Mali PM:mali_pm_suspend
[ 1374.220712] (0)[5:kworker/u:0]Mali<2>: Mali PM: mali_pm_os_suspend: from = 0
[ 1374.221601] (0)[5:kworker/u:0]Mali<2>: _mali_osk_pm_delete_callback_timer (0)
[ 1374.222484] (0)[5:kworker/u:0]Mali<1>: Mali platform: Got MALI_POWER_MODE_DEE
P_SLEEP event, already off
[ 1374.224637] (0)[5:kworker/u:0][Power/RTC] read tc time do_gettimeofday = 1357
000900.000512066
[ 1374.225706] (0)[5:kworker/u:0][Power/BatMeter] [oam] get_hw_ocv (pchr) : adc_
result_reg=16573, adc_result=3641
[ 1374.226948] (0)[5:kworker/u:0][Power/BatMeter] [battery_meter_suspend]
[ 1374.228072] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.228991] (0)[5:kworker/u:0]now:00=41:40 01/01/2013. min.tv64=7809586550314
4
[ 1374.229920] (0)[5:kworker/u:0]
[ 1374.229926] (0)[5:kworker/u:0]ccci_helper_suspend
[ 1374.230906] (0)[5:kworker/u:0][Power/PMIC] ******** MT6323 pmic driver suspen
d！ ********
[ 1374.232051] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.233073] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.234135] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_prepare @@@@@@@@@@@@@@@@
@@@@
[ 1374.235064] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.236844] (0)[5:kworker/u:0]Disabling non-boot CPUs ...
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] _Chip_pm_enter @@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_CON0 0xF0205100 = 0x1010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_CON1 0xF0205104 = 0x8009A000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ARMPLL_PWR_CON0 0xF0205110 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_CON0 0xF0205120 = 0xF0000010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_CON1 0xF0205124 = 0x800F6000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] MAINPLL_PWR_CON0 0xF0205130 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_CON0 0xF0205140 = 0X30000000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_CON1 0xF0205144 = 0x80000030
[ 1374.237536]-(0)[5:kworker/u:0][SPM] UNIVPLL_PWR_CON0 0xF0205150 = 0x6
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_CON0 0xF0205240 = 0xF0000010
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_CON1 0xF0205244 = 0x2134000
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_PWR_CON0 0xF0205250 = 0x2
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WHPLL_PATHSEL_CON 0xF0205254 = 0x0
[ 1374.237536]-(0)[5:kworker/u:0][Power/BatMeter] vbat_val=3634, ret_time=5400
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_let_the_dog_home
[ 1374.237536]-(0)[5:kworker/u:0]WDT:[mtk_wdt_restart] type =1, pid=5
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][WDT] suspend
[ 1374.237536]-(0)[5:kworker/u:0][SPM] Kernel Suspend with cpu_pdn=1, infra_pdn=
1
[ 1374.237536]-(0)[5:kworker/u:0][SPM] md_settle = 99, settle = 99
[ 1374.237536]-(0)[5:kworker/u:0][SPM] ！ CANNOT GET SLEEP ACK FROM UART ！
[ 1374.237536]-(0)[5:kworker/u:0]mtk_wdt_set_time_out_value: value=30 ！
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_set_reset_length:-1064544064
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_let_the_dog_out
[ 1374.237536]-(0)[5:kworker/u:0][SPM] WDT with cpu_pdn=0, infra_pdn=0
[ 1374.237536]-(0)[5:kworker/u:0]WDT:[mtk_wdt_restart] type =1, pid=5
[ 1374.237536]-(0)[5:kworker/u:0][SPM] spm_wdt_restart
[ 1374.237536]-(0)[5:kworker/u:0][WDT] resume(1)
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] Wakeup Succefully
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep]
[ 1374.237536]-(0)[5:kworker/u:0][Power/Sleep] slp_abort_cnt:174,slp_normal_cnt:
0
[ 1374.238606] (0)[5:kworker/u:0]usb save current success
[ 1374.239589] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.240517] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_finish @@@@@@@@@@@@@@@@@
@@@@
[ 1374.241450] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.242488] (0)[5:kworker/u:0][Power/RTC] read tc time = 2013/01/01 (2) 00:41
:40
[ 1374.243436] (0)[5:kworker/u:0][Power/PMIC] ******** MT6323 pmic driver resume
！ ********
[ 1374.244544] (0)[5:kworker/u:0]
[ 1374.244551] (0)[5:kworker/u:0]ccci_helper_resume
[ 1374.245692] (0)[5:kworker/u:0][Power/BatMeter] [oam] get_hw_ocv (pchr) : adc_
result_reg=16573, adc_result=3641
[ 1374.247735] (0)[5:kworker/u:0][Power/RTC] read tc time do_gettimeofday = 1357
000900.000535151
[ 1374.248794] (0)[5:kworker/u:0][Power/BatMeter] sleeptime=(0)s, be_ocv=(3649),
af_ocv=(3649), D0=(75), car1=(149), car2=(149)
[ 1374.250202] (0)[5:kworker/u:0][Power/BatMeter] [battery_meter_resume]
[ 1374.251085] (0)[5:kworker/u:0]Mali<1>: Mali PM: mali_pm_resume
[ 1374.251805] (0)[5:kworker/u:0]Mali<2>: [+]MFG enable_clock
[ 1374.252563]-(0)[5:kworker/u:0][SMI] [pid=5]on_larb_power_on(), larb_idx=0
[ 1374.253418]-(0)[5:kworker/u:0][SMI] [pid=5]set as SMI_BWC_SCEN_VR1066Mali<2>:
[-]MFG enable_clock
[ 1374.254596] (0)[5:kworker/u:0]Mali<2>: Mali PM: mali_pm_os_resume: from = 1
[ 1374.255562] (0)[5:kworker/u:0][UART0] Resume(0)！
[ 1374.256141] (0)[5:kworker/u:0][UART1] Resume(0)！
[ 1374.256729] (0)[5:kworker/u:0][PWRAP] Resume！
[ 1374.257268] (0)[5:kworker/u:0][PWRAP] init_done0: 1 init_done1: 1 init_done2:
1 pattern: 0x1234
[ 1374.258433]-(0)[5:kworker/u:0]msdc0 on clock failed ===> retry once
[ 1374.259231] (0)[5:kworker/u:0]msdc0 -> PM Resume
[ 1374.259787] (0)[5:kworker/u:0]msdc LDO<4> power on<3300>
[ 1374.260484] (0)[5:kworker/u:0][Power/PMIC] [hwPowerOn] acquire powerId:4 inde
x:0 mod_name: msdc powerVolt:3300
[ 1374.261737] (0)[5:kworker/u:0][Power/PMIC] [4] PMU LDO Enable
[ 1374.262479] (0)[5:kworker/u:0][Power/PMIC] ****[dct_pmic_VEMC_3V3_sel] value=
3300
[ 1374.263444] (0)[5:kworker/u:0][Power/PMIC] [dct_pmic_VEMC_3V3_enable] 1
[ 1374.274404] (0)[5:kworker/u:0]msdc0 -> ！ Set<52000KHz> Source<200000KHz> ->
sclk<50000KHz> DDR<1> mode<2> div<0>
[ 1374.343906] (0)[5:kworker/u:0]msdc0 select card<0x00010000>
[ 1374.344623]-(0)[5:kworker/u:0]msdc1 on clock failed ===> retry once
[ 1374.346663] (0)[5:kworker/u:0]AudDrv_resume
[ 1374.347159] (0)[5:kworker/u:0]+AudDrv_resume+AudDrv_Clk_On, Aud_AFE_Clk_cntr:
0
[ 1374.348177]-(0)[5:kworker/u:0]+ AudDrv_Clk_Off, Aud_AFE_Clk_cntr:0
[ 1374.348977] (0)[5:kworker/u:0][M4U] [pid=5]SMI register restore when resume p
hone
[ 1374.349941] (0)[5:kworker/u:0][DISP/MTKFB] [FB Driver] mtkfb_resume()
[ 1374.351093] (0)[5:kworker/u:0][Power/DVFS] mt_cpufreq_resume
[ 1374.351794] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA3: 0x58
[ 1374.352606] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA4: 0x58
[ 1374.353419] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA5: 0x48
[ 1374.354260] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA6: 0x2
[ 1374.355062] (0)[5:kworker/u:0][Power/DVFS] PMIC_WRAP_DVFS_WDATA7: 0x2
[ 1374.355869] (0)[5:kworker/u:0][mtk_thermal_resume]
[ 1374.356491] (0)[5:kworker/u:0]stop_GPT: GPT4 is not in use！
[ 1374.357282] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_resume:++
[ 1374.357973] (0)[5:kworker/u:0]MTK-BTIF[I]mtk_btif_resume:--, i_ret:0
[ 1374.359464] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.360392] (0)[5:kworker/u:0][Power/Sleep] _Chip_pm_end @@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.361323] (0)[5:kworker/u:0][Power/Sleep] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@
[ 1374.362267] (0)[5:kworker/u:0]Restarting tasks ...
[ 1374.363308] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] u4channel[3]=12792.
[ 1374.364218] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] adc_result_temp=12792,
adc_result=702, r_val_temp=1.
[ 1374.365432]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1374.366455] (0)[6675:kworker/0:0][Power/WMT_Thermal] [wmt_thz_get_temp] temp
= 0
[ 1374.367536] (0)[6675:kworker/0:0][Power/Battery] [EM] FG_Battery_CurrentConsu
mption : 388/10 mA
[ 1374.376282]-(0)[581:AlarmManager][Power/Alarm] alarm wait
[ 1374.377103]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> KeyEvent
s
[ 1374.377970]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event0-5
47
[ 1374.378821]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event1-5
47
[ 1374.379668]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event3-5
47
[ 1374.380515]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> event4-5
47
[ 1374.381398]-(0)[594:InputReader][Power/Kernel]:ws deactivate-> KeyEvent
s
[ 1374.394855] (0)[5:kworker/u:0]done.
[ 1374.395389]-(0)[59:kworker/u:2][Power/Kernel]:ws deactivate-> mmc0_det
ect
[ 1374.396327] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.397018] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.398283] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.399036] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.399959] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.400757] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.401441] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.402705] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.403458] (0)[59:kworker/u:2][Power/PMIC]
[ 1374.404165] (0)[5:kworker/u:0][Power/Kernel][print_active_wakeup_sources]: ac
tivity: mmc1_detect
[ 1374.410597] (0)[59:kworker/u:2]****[dct_pmic_VMCH_sel] value=3300
[ 1374.411411] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.444011] (0)[59:kworker/u:2]msdc1 -> ！ Set<400KHz> Source<200000KHz> ->
sclk<400KHz> DDR<0> mode<0> div<125>
[ 1374.487232] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.490759] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.492756] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.514265] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.516290] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.518697] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1374.519676] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.521303] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1374.521936] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1374.522972] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1374.533853] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1374.534660] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1374.535291] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1374.536326] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1374.537091] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1374.558201] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1374.559892] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.560605] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.561868] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.562622] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.563545] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.574110] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.574796] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.576060] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.576814] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1374.577744] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.614111] (0)[59:kworker/u:2]msdc1 -> ！ Set<300KHz> Source<200000KHz> ->
sclk<299KHz> DDR<0> mode<0> div<167>
[ 1374.656345] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.660505] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.662622] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.684376] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.686522] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.688147] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1374.689233] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.690857] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1374.691491] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1374.692526] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Disable
[ 1374.693291] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1374.704186] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1374.704817] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1374.705852] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1374.706617] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1374.728467] (0)[59:kworker/u:2]msdc1 -> set mclk to 0
[ 1374.730183] (0)[59:kworker/u:2]msdc LDO<2> power on<3300>
[ 1374.730895] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:2 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.732158] (0)[59:kworker/u:2][Power/PMIC] [2] PMU LDO Enable
[ 1374.732913] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMC_sel] value=3300
[ 1374.739757] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 1
[ 1374.740560] (0)[59:kworker/u:2]msdc LDO<3> power on<3300>
[ 1374.741244] (0)[59:kworker/u:2][Power/PMIC] [hwPowerOn] acquire powerId:3 ind
ex:0 mod_name: msdc powerVolt:3300
[ 1374.742508] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Enable
[ 1374.743262] (0)[59:kworker/u:2][Power/PMIC] ****[dct_pmic_VMCH_sel] value=330
0
[ 1374.754240] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 1
[ 1374.795142] (0)[59:kworker/u:2]msdc1 -> ！ Set<260KHz> Source<200000KHz> ->
sclk<259KHz> DDR<0> mode<0> div<193>
[ 1374.870813] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<8><0x1aa> Error<-110>
Resp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1374.884282] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.903496] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.922918] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.942858] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.963782] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1374.986528] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.013042] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.047120] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.096264] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.175516] (0)[8521:aee_dumpstate][M4U] [pid=8521]m4u_proc_read
[ 1375.611826] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] u4channel[3]=12781.
[ 1375.612680] (0)[6675:kworker/0:0][Power/PMIC] [AUXADC] adc_result_temp=12781,
adc_result=702, r_val_temp=1.
[ 1375.616228]-(0)[6675:kworker/0:0][Power/Kernel]:ws deactivate-> pmicAuxa
dc irq wakelock
[ 1375.621771] (0)[6675:kworker/0:0][THERMAL/MONITOR] [.get_temp] tz: mtktspmic
dur: 10328
[ 1375.622800] (0)[6675:kworker/0:0][Power/WMT_Thermal]
[ 1375.729139] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.731360] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.733559] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.738826] (0)[6675:kworker/0:0][wmt_thz_get_temp] temp = 0
[ 1375.901763] (0)[6675:kworker/0:0][THERMAL/MONITOR] [.get_temp] tz: mtktswmt d
ur: 278959
[ 1375.902931] (0)[6675:kworker/0:0][Power/Battery] [EM] FG_Battery_CurrentConsu
mption : 388/10 mA
[ 1375.913146] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<55><0x0> Error<-110> R
esp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.918731] (0)[59:kworker/u:2]sd card rocr <0x0>
[ 1375.919915] (0)[59:kworker/u:2][MSDC] msdc1 -> XXX CMD<1><0x0> Error<-110> Re
sp<0x0> <- msdc_dump_trans_error() : L<5276> PID<kworker/u:2><0x3b>
[ 1375.921545] (0)[59:kworker/u:2]msdc LDO<2> power off
[ 1375.922179] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:2 index:0 m
od_name: msdc
[ 1375.923215] (0)[59:kworker/u:2][Power/PMIC]
[ 1375.937197] (0)[59:kworker/u:2][2] PMU LDO Disable
[ 1375.937835] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMC_enable] 0
[ 1375.942752] (0)[59:kworker/u:2]msdc LDO<3> power off
[ 1375.943386] (0)[59:kworker/u:2][Power/PMIC] [hwPowerDown] powerId:3 index:0 m
od_name: msdc
[ 1375.949354] (0)[59:kworker/u:2][Power/PMIC] [3] PMU LDO Disable
[ 1375.952970] (0)[59:kworker/u:2][Power/PMIC] [dct_pmic_VMCH_enable] 0
[ 1376.191788]-(0)[8532:top][Power/Battery] [charger_hv_detect_sw_workaround]
[ 1376.254644] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery before
[ 1376.255899] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] check battery after
[ 1376.257125] (0)[47:mtk charger_hv_][Power/Battery] [charger_hv_detect_sw_thre
ad_handler] upmu_chr_get_vcdt_hv_det() ！= 1
[ 1376.258476] (0)[47:mtk charger_hv_][Power/Battery] --------------------------
------------------------
[ 1376.261959] (0)[47:mtk charger_hv_][Power/Battery] [fan5405_config_interface]
Reg[0]=0x40