Not detect ft5x06 at I2C MT6575 ICS2 kernel 3.0.13 NAND 4Gb (not eMMC)
时间：10-02
整理：3721RD
点击：
Problem of definition touchpanel ft5x06 at I2C MT6575 ICS2 kernel 3.0.13 NAND 4Gb (not eMMC).
Has defined addresses 0x70 and 0x72 and works.
Registered normal if not disable option .flags = MSDC_REMOVABLE in board.c
But with this options not detect SDCard at msdc1 (mmc0)
Change power for host and switch to VGP2 at /mmc-host/sd.c for enable detect SDCard, but the touchpanel cannot detect at boot.
Please, help me！ Sorry for translate.
定義觸摸屏ft5x06在I2C MT6575 ICS2內核3.0.13 NAND4GB（不eMMC的）問題。
有定義的地址和的0x70的0x72和作品。
註冊正常的，如果沒有禁用選項。標誌= MSDC_REMOVABLE在board.c
但這種選擇不是在msdc1（MMC0）檢測SD卡
更改電源為主機，並切換到VGP2在/ mmc-host/sd.c為使檢測SD卡，但觸摸屏不能檢測在啟動。
請幫幫我！對不起，翻譯。
Has defined addresses 0x70 and 0x72 and works.
Registered normal if not disable option .flags = MSDC_REMOVABLE in board.c
But with this options not detect SDCard at msdc1 (mmc0)
Change power for host and switch to VGP2 at /mmc-host/sd.c for enable detect SDCard, but the touchpanel cannot detect at boot.
Please, help me！ Sorry for translate.
定義觸摸屏ft5x06在I2C MT6575 ICS2內核3.0.13 NAND4GB（不eMMC的）問題。
有定義的地址和的0x70的0x72和作品。
註冊正常的，如果沒有禁用選項。標誌= MSDC_REMOVABLE在board.c
但這種選擇不是在msdc1（MMC0）檢測SD卡
更改電源為主機，並切換到VGP2在/ mmc-host/sd.c為使檢測SD卡，但觸摸屏不能檢測在啟動。
請幫幫我！對不起，翻譯。
Any sugestions?