WG2005 license 错误！

机器启动WG2005的时候，遇见这样的问题：
license request for viewdraw feature failed 

最初的详细错误是：
The following FLEXlm errors were found:
    Server C:\Documents and Settings\All Users\Application Data\mgc\: Cannot find license file
 The license files (or server network addresses) attempted are
 listed below.  Use LM_LICENSE_FILE to use a different license file,
 or contact your software provider for a license file.
Feature:       viewdraw
Filename:      C:\flexlm\license.dat
License path:  C:\flexlm\license.dat
FLEXlm error:  -1,359.  System Error: 2 "No such file or directory"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server C:\Documents and Settings\All Users\Application Data\mgc\license.dat: Invalid host
 The hostid of this system does not match the hostid
 specified in the license file
Feature:       mentorall_s
Hostid:        ffffffff
License path:  C:\Documents and Settings\All Users\Application Data -
   \mgc\license.dat
FLEXlm error:  -9,57
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server C:\Documents and Settings\All Users\Application Data\mgc\license.dat: Invalid host
 The hostid of this system does not match the hostid
 specified in the license file
Feature:       mgc_s
Hostid:        ffffffff
License path:  C:\Documents and Settings\All Users\Application Data -
   \mgc\license.dat
FLEXlm error:  -9,57
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server D:\Tornado2.2\license.dat: No such feature exists
Feature:       viewdraw
License path:  D:\Tornado2.2\license.dat
FLEXlm error:  -5,357
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server C:\flexlm\license.dat: Cannot find license file
 The license files (or server network addresses) attempted are
 listed below.  Use LM_LICENSE_FILE to use a different license file,
 or contact your software provider for a license file.
Feature:       viewdraw
Filename:      C:\flexlm\license.dat
License path:  C:\flexlm\license.dat
FLEXlm error:  -1,359.  System Error: 2 "No such file or directory"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".



然后我把Hostid 改了之后，发现有下面的错误：


The following FLEXlm errors were found:
    Server C:\Documents and Settings\All Users\Application Data\mgc\license.dat: Invalid license file syntax
Feature:       mentorall_s
License path:  C:\Documents and Settings\All Users\Application Data -
   \mgc\license.dat
FLEXlm error:  -2,134
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server C:\Documents and Settings\All Users\Application Data\mgc\license.dat: Invalid license file syntax
Feature:       mgc_s
License path:  C:\Documents and Settings\All Users\Application Data -
   \mgc\license.dat
FLEXlm error:  -2,134
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server D:\Tornado2.2\license.dat: No such feature exists
Feature:       viewdraw
License path:  D:\Tornado2.2\license.dat
FLEXlm error:  -5,357
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

    Server C:\flexlm\license.dat: Cannot find license file
 The license files (or server network addresses) attempted are
 listed below.  Use LM_LICENSE_FILE to use a different license file,
 or contact your software provider for a license file.
Feature:       viewdraw
Filename:      C:\flexlm\license.dat
License path:  C:\flexlm\license.dat
FLEXlm error:  -1,359.  System Error: 2 "No such file or directory"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

希望高手解决一下！不甚感激！

用license_manager程序的话在LM_LICENSE_FILE变量的值要用端口号@主机名的形式，并且要和license文件里的一致，并把license文件放到相应的主机上。

如果你是单机安装，建议你不要用license_manager程序，而是直接在MGLS_LICENSE_FILE变量里输入license文件（包括路径）就可以了。

谢谢！问题已经解决！主要是因为我使用Bitdefender10pus的时候，在删除软件时强行删除，结果Keygen得不到Hostid，
关机后，在启动就好！

先装PADS2005SP2再装wg。这样就不要license

给我一个Mentor 2005WG 的license吧,谢谢了

没有上传成功！不知道怎么回事！

4楼所说的是真的吗?