mentor wg2005的网络表不能调进PCB

     PDB Warning:  Missing cell or cell pin data.
      Top Cell with cell name RES will not be used for Part
      Number RES.  When cell problems have been fixed, please
      run DataBase Load if you wish to make use of this cell.

     PDB Warning:  Missing cell or cell pin data.
      Top Cell with cell name RES will not be used for Part
      Number 2.  When cell problems have been fixed, please
      run DataBase Load if you wish to make use of this cell.

     After augmentation of supply pins, there are 2 nets where 0 nets have only one pin.

     WARNING:  Cell RES could not be found in the CellDB for
      Part Number RES.

     WARNING:  Cell RES could not be found in the CellDB for
      Part Number 2.

     2 Pin application warnings found as noted above.

     Creating a formatted Schematic Netlist (LogFiles\SchematicNetlist.txt)...
     A formatted Schematic Netlist has been created.

     The Logic DataBase has been compiled from the Schematic Design.
      Use Netload to bring the Component Design into sync.

     This Logic Data was Compiled with 4 warnings.
      Erroneous results may occur if not fixed.

那个RES的CELL有吗?管脚号什么的都对吗?

没有问题啊

问题解决了，是cell与PKG_TYPE的值不一致。多谢小编！